HOW TO REMOVE OXIDIZATION AND POLISH YOUR KIRBY HERITAGE VACUUM OR KIRBY AVALIR VACUUM CLEANER
Вставка
- Опубліковано 7 вер 2024
- HOW TO REMOVE OXIDIZATION AND POLISH YOUR KIRBY HERITAGE VACUUM OR KIRBY AVALIR VACUUM.
I apologize for sound quality, this was on my 1st camera which was playing up at time of recording.
I will be editing and reuploading this video with new soundtrack in near future to remove annoying whistle.
Thankyou understanding and support of my content
Links:
(some of the links below may be affiliate links
Merchandise teespring.com/....
USA Silvo Aluminum Tarnish remover amzn.to/38JWOBJ
USA Meguires Aluminum polish amzn.to/3iS3YbI
USA Mothers Aluminum Polish amzn.to/2BRhEmM
This is what i used to polish up
UK Maguires metal polish amzn.to/32evMB6
UK Mothers Metal Polish amzn.to/3058dbn
UK Silvo amzn.to/32s6KPh
UK Steel Wool amzn.to/2WgWXHT
Videography:
SONY FDR-AX700 4K HDR Camcorder amzn.to/3w5VAvv
Rhode VideoMic amzn.to/351Uo05
Corel VideoStudio 2021 Ultimate amzn.to/2Tdh4rs
Music www.epidemicso...
DISCLAIMER: Links included in this description may be affiliate links.
If you purchase a product or service with the links that i provide, i may receive a small commission. There is no additional charge to you!
I appreciate the support for my channel so i can continue to provide you with free content.
In this video i will be polishing and removing oxidization from a Kirby Heritage vacuum.
Showing you how to polish up your Kirby vacuum.
To as new like as it looked when you had that Kirby vacuum demonstration
This is exactly the same process i use to polish up my Kirby Avalir, Kirby G4, Kirby Sentria 2 or early Kirby Vacuum models.
Put a new lease of life and the bling bag into your Kirby Avalir Vacuum or Kirby Legend 2 or Kirby Heritage, giving the answer to the question , are Kirby vacuums worth the money, are Kirby vacuum worth it ?
Kirby Vacuums do get oxidized overtime if stored in a damp area where moisture is present.
Also if you have used you Kirby shampooer and got water or Kirby shampoo on your Kirby vacuum.
The stains on you new Kirby vacuum in 2020 can be disheartening.
This video will show you how easy it is to remove finger marks or water marks on your Kirby Vacuum.
Whether you have owned you Kirby Avalir 2 12 months or your Kirby Avalir for 6 years.
Or even own a Generation G4 , G5 , G6 , G7 or Ultimate G.
The polishing process is exactly the same as i use on the Kirby Legend 2.
Even the older Kirby shampoo system that had aluminium can be polished up transforming you Kirby vacuum to look just as good as a new Kirby vacuum in 2022
Also the Kirby G6 floor polishing kit had a aluminum polished head.
#kirbyenthusiast #kirbyavalir #kirbyvacuum
Thank you for uploading this so quickly! I just finished the Heritage 2 tear down and literally refreshed my UA-cam page on my iPhone and then this popped up 😁😁😁
Not a problem , rebuild is scheduled for 2 hours time
@@KirbyEnthusiast are used to re-polish them with a buffer rebuild the innards with genuine parts there are other companies that make motor parts but we always use the genuine when I worked in the vac shop. There was literally a mountainous pile back in one room of the things and I used to pull one out about once or twice a week rebuild it and polish it up and we can sell it in the shop and I’d make a couple of bucks off of it
Come to West Texas, I’ll take you over to the factory as I said it’s 30 miles from me. I have my grandmothers 1958 small head Kirby and I have a G4 a legend and an avilir. And I have every attachment that was ever made for the things.
I'm from the south. I have a hard time understanding just about everyone
Can't wait to polish my new Kirby
Really appreciate comment and support of my channel 👍🔔
Glad to see that it is possible to take care of this issue! My Avilir got stuck in my garage for a few months due to a variety reasons, where there's no protection from the humidity, and it's definitely not in the best of conditions visually. Now I've got myself a fun weekend project (assuming I won't need to use the Kirby that weekend! Had a few issues with worn belts and badly positioned beater bars, as well as a nasty hair clog in the motor section that I only recently discovered and cleared out, so I've got a bit of vacuuming and shampooing that needs to be done first once I get some new belts!)
Great to here my channel is helping you get your Avalir back to working efficiently.
Thankyou for support of my channel 👍🔔 not to miss new uploads 👌👌
At the vac shop where I worked for years, we use a power wheel buffer & buffing rouge to buff out the old Kirbys and put a shine on the like paper brand new.
I have a buffing wheel and the different paste, I have done a video using it . Though most owners wouldn’t have one so I shared how to by hand . Plus I hand no buffing wheel when I made this .
Another brilliant instructional video Dean. Will be sure to do this if needed on my G5. Thanks again
No problem , glad to help . 👍👍
Thumbs up for the really great help, I had tried auto compound and it did nothing. Never thought of using aluminum polish.👍
No problem 👍 Thanks for supporting of my channel make sure to ding the 🔔not to miss new uploads. Happy New Year 😀😀
Another great video and a very important aspect of maintaining a Kirby - there’s nothing like a shiny Kirby to put a smile on your face. Keep up the good work KE.
Love your comments they make me so focused on making more content . Thanks so much nice to be appreciated
Thank you, have a G4 but lucked up on a G6 2001 limited Edition. It was in bad shape going through the process of cleaning it up and thinking about making it my primary vacuum.
G6 is great model , love the color scheme 👌👌
Wow thanks a lot mate for sharing, much appreciated!!
Glad I could help , thankyou for awesome comment and support of my channel. Really appreciated 👍🔔
Great result Dean.I can go to my old garage and pull out and straighten old Aussie nails in the timberwork they are high grade steel made in OZ..as opposed to Chinese nails from Bunnings which are garbage...Same goes for Aluminium...the older metal is of a higher grade and much better quality...as a retired Electroplater who specialised in Zinc,Cadmium and Chrome I shake my head at the rubbish we are being sold.I have a twenty three year old Simpson Washing Machine..made in OZ...the Chassis is high grade steel...I only have to tap Thai made machines to know they too are low grade junk.
Thanks for support and awesome comment, the days of buying good aluminium and steel has gone . The older kirbys polish up a lot easier , you have to work a little harder on the newer ones .
I spent a day polishing mine using a bench grinder with polishing mops, I must say it was worth the effort, Here in Spain Maquires was twice the normal cost and Mothers was unobtainable at sensible price.Having seen the results I think I will have to invest in some for the next time I give my Legend a "service", another useful vid thanks.
That's awesome so glad im helping so many Kirby Enthusiasts. Thanks so much for SUBSCRIBING & Supporting my channel and such great comment helps me grow alot.
Thanks for uploading this video so quickly. I love to see when you get a shiny Kirby!
Not a problem, I try to get as much content out each wk . Working around my normal job . Thanks for continued support and sharing my channel. I appreciate every comment, like and Subscription. It mean I’m making a difference. Thanks again for supporting my channel .👍👍
I used 1200 wet n dry using warm soapy water to remove all corrosion, then buffed using T cut to a mirror finish, finally finished off using Autosol polish to give it a nice lustre and protection. It takes time to do the job right and if there is a lot of corrosion the 1200 grit will get rid of it without scratching deeply. I do like the old ways of polishing though, I still polish paintwork using old methods because they never fail. You are not afraid of a little elbow grease, which is, I am sad to say, lacking in the young today.
I didn’t d use wet and dry 1500 in another video where I removed deep scratches on Kirby g6,
The silvo to me smell like T cut so I think it had the same properties.
I don’t a little bit of elbow grease , I think you appreciate it more when you put the time and effort in.
I also have updated version of this video due to sound issues in this one from 2yrs ago
Thanks so much for awesome comment and support . 👍👍
Just picked up a 2001 edition G6, and about to start on it. A knife collector told me too use Metal Glo , I have to order . Thanks for Your Time Sir !
Your welcome make sure to share my channel on social media
i had a tin can of Luster pad a long time ago and was blown away how good it did on chrome. it actually ate thru rust. i hope the company hasnt changed their formula since then cause that was a product id swear by. www.ebay.com/itm/LUSTER-PAD-METAL-ALUMINUM-POLISH-Perfect-Car-Wheels-Rims-Cleaner/182186127603?epid=1522911865&hash=item2a6b23b0f3:g:eTYAAOSwJb9WqSCt
Damn, i was wondering if you had a video on how to polish the metal. Good look, man! Mine is starting to look a little rough. Maybe I'll get some chrome spinning rims and make a video lol.
Nice Kirby
Thanks been after for a while , got some great content coming with this baby .
Wow, amazing. I'll try it myself and see how I go on 😎
Glad my videos are reaching and helping so many Kirby owner’s. Thanks so much for your continued support of my channel. Let me know how you go, you can post pics on my Kirby Enthusiast Facebook page.
Cheers for that. Trying to clean up this G4 that l picked up and will be giving to my parents for a gift, but its looks old and very tarnished. Wasnt getting very far. Will give this a crack
Your welcome glad I could help . G4 is awesome Kirby . Thankyou for continued support and awesome comment really appreciated 👍👍
I used a machine on mine, and you did it by hand in in three minute what took me a hours.
The Silvo with the wool get rid of corrosion with ease , the the maguires just does a great job . Just trial and error over the months and found what worked best . Thanks for supporting my channel and commenting really appreciated. 👍👍
Another great how to video. Nicly done.
I much prefer your results! Idk if it was me, but I noticed on Performance Reviews' video on Kirby polishing, the final finish still looked hazy.
Thankyou , I used to have Cosworths in Uk so used to polishing up aluminium parts 😂. Thankyou git continued support of my channel. 👍👍
I use the mothers and cleans up real well and after I put a layer of wax on it to give it a protective layer sure shines up nice but I do got some that has some deep scratches on them and I just wonder what they need to do in order to get them out what the process is
This may help ua-cam.com/video/LtCDEbJz8lo/v-deo.html
Try Nevr Dull by Eagle 1
I have a GSix 2001 Limited Edition and it’s badly in need of a polish.
Should come up a treat with this process 👍👍🔔
Strange how I’m using my Kirby heritage own buffer attachment to do this lol
That so cool. Love the heritage after being the 1st Kirby I ever saw demonstrated
Great video! Where did you get the polishing attachment for the drill?
That is awesome!
Link in Video description and pinned comment
Can you please put a link to the polishing drill attachment that you used? Thanks.
This is the set i bought amzn.to/3Sf2D03
I'm a total novice with tools and stuff, if you don't mind me asking: what was the attachment that you used on your drill?
I'm bringing a G4 I bought ten years ago back from the dead.
Should be a link in description to the drill attachment I used .
I have a Kirby G5 model vacuum cleaner.
Kirby G5 is awesome, sadly had to sell mine the other Wk. To put more money into channel content. Though will be replacing in Future.
@@KirbyEnthusiast I don't know how to remove oxidation and polish my vacuum cleaner and it looks rough. It is a very nice vacuum cleaner and it definitely deserves some TLC.
I got an avalir 2 second hand and the brushroll head is in a terrible state. The locks for the brushroll guard are so rusty I have to hammer them open and closed. Aside from ordering a new brush head attachment, what do you recommend for fixing this?
Check the bearings on the brush roller run free, you can repack them after hair removal
Will this work on the head of the sentria ?
Yes definitely 👍
Do you have a video of a full teardown of a Heritage or Legend?
I'd love to give my parents' a full tuneup. (It is a "bagless" so it fills up into a cloth bag, way old!)
hope this helps ua-cam.com/video/pppE74A-Ddg/v-deo.html
@@KirbyEnthusiast Thanks!
I just looked closer and apparently we have a Tradition model. Not sure how that compares. But it is old!
Tradition is the same just the bag emptor changed
I tried this, but it didn't work too well. Maybe the corrosion is so embedded that I need a bench buffer.
Is it a particular steel wool you are using or can I just go pick any kind up at the hardware store?
Also, I have a Sentria II that could use some polishing, however it isn’t nearly as needed as what that Heritage II needed in your video... you probably watched my video of my Kirby... I’m honestly afraid if I use steel wool on it, I won’t be able to buff that out... PLEASE HELP!
The steel wool is the very fine grade , feels a bit like cotton wool it that fine .
Kirby Enthusiast Ok! Thanks!
Colter Kardas your welcome , I have just picked up another Sentria 2 that will need the same process.
Kirby Enthusiast Oh! Please make a video so I can watch exactly what you do so I don’t mess mine up LOL
is that a Birmingham accent I hear?
Brummie through and through 😂. Make sure to ding the bell not to miss out on new uploads . Thanks for supporting my channel 👍👍
Pardon me but I can’t understand what product you are using… your accent.
Links in description and should be subtitles to translate my accent 😉
interesting i can understand him perfectly fine
i still plan to use something like this once i find a good price on one. www.ebay.com/itm/8-In-Bench-Grinder-Buffer/323831938978?epid=2255528886&hash=item4b65e33fa2:g:WygAAOSwC7xdAANE
Id like something like that but on a budget at the moment, so still doing by hand, need to upgrade my laptop and camcorder to 4k for better quality video's for my Kirby fans lol