Відео

@@maheshbabugodugupati0046 not selling please

@@kishantechtechnology4013 okay tell me

@samuelkennethacquah1068 how to reduce back bass and side bass from subwoofer and how to creat punch buss from subwoofer 2=for hf what frequency we set for claer and crystal sound

@@kishantechtechnology4013 you can't actually set driverack for the sub not to go sides or backwards, because the pattern of sub speaker is omnidirectional, meaning the sub speaker will sound 360°. So u can't control that. 2. You can actually use the frequency I used to crossover for your speakers it will sound clear.

@@samuelkennethacquah1068we set the frequency for the sub hpf=30hz bw 18 and lpf 115hz lr 24 And used parametric eq Eq 1=40hz gain 2.5 =q =56 Eq=2=50hz gain 3.0=q=84 Eq=3=60hz gain 3.0=q=84 Eq=4=70hz gain 2.5=q=84 I set the frequency this type for subwoofer Is this correct if it is not correct Then tell me what is the correct frequency for the subwoofer plz sir

@kishantechtechnology4013 well don't use BW on other side and Use LR on others side if your are using BW use BW only if you Are using LR use LR only, and don't EQ your sub sub frequencies comes with their own shape. And you can go lower in frequency like 80Hz 90Hz don't let the sub be at 115Hz

@@jamesacquaye3624 Having a quality vocal depends on many things not just the mixer. It depends on the speakers,DSP settings,how well the speaker is tuned and the quality of the microphone. They come hand in hand

@samuelkennethacquah1068 how do I set the EQ for keyboard

@@jamesacquaye3624 don't EQ keyboard let the EQ be flat and put high pass filter on it

@@BrianAvans Hello, please if you are sure is Phase invert the speakers need, u can check out Dbx-PA2-260 and 360. Or u can try Ashley DSP these are the low budget . If you want expensive on please check Lake

@samuelkennethacquah1068 Thank you for your reply!👍🏽

@@TheGadgetklinik thank you sir

@@abinashrao5145 noted

@@abinashrao5145 okay sir

@@adebiyioluwagbenga5596 sorry sir, I actually regret this after I was done with the teaching. I promise not to make this mistakes again.

@@prrobertkagaha9735 use the filters. That is linkwitz Riley or Butterworth. The lesser the number the less steep it becomes

@@mrcreations8416 in English please

Please come again with your question

@@kennedybenson5090 yes please, just a short visual look

@@samuelkennethacquah1068 Alright

actually we know EQ is for tonal balance control. but many people misuse this gear.in my video all i wanted to do is bring some image to what we push or press using this piece of gear. thanks for your comments and add up.

@@isosiya Thank you sir❤️

@@georgeogrady449 still available in my country

@@adebiyioluwagbenga5596 Yes please don't use the RTA to tune the room because it will give you something nasty.

@@samuelkennethacquah1068 Thank you for your response. Any advice on how to tune the room for a beginner?

@@adebiyioluwagbenga5596 Play back music that u hv listen to over and over. Play it through the speaker listen to what is missing and try to use the EQ to bring it in. Is not the accurate way. The best way is letting system engineer do this type of work. Where are you located?

@@samuelkennethacquah1068 I will try it. I am in Rivers state in Nigeria

@@adebiyioluwagbenga5596 @Ghana

@@opkemma +233574407447 Kenneth.

@@samuelkennethacquah1068 Thank you very much Bro

@@jthunderbass1 that's the reason it worth the test.

It is encroaching functions of their glorified digital mixers (like m32s).

@@abelimwakijungu1226 actually dbx is not the company that manufactures M32 digital mixers. Is Midas

@@AyehSamuel-gx7br +233574407447 Kenneth

@@NyarkoDaniel-k7c Yes, every settings will be stored

yes and even if you use different filters the phase slopes will mismatch. thanks for the comment

@@orlarieper6175 thank you sir for the top up

My guy...who told you low cut on a graphic eq is for protecting speakers without subs. IT IS NOT. Low cut is specifically designed to reduce feedback on transducers and pickups. You use it for microphone or some instruments that use pickup. Feedback ie from a mic placed too close to a speaker is always going to be be a bigger issue with low-end. Cut the low-end, and 90% of the problem is solved. the remaining feedback can be notched out with a 3-4db cut on individual frequency bands and a little less to their adjacent bands. That is the only use of the low cut. It will not protect speakers. You need a properly configured crossover to do that. Better yet, if you have powered speakers and subs, plug the full range signal in to the sub, then the output from the sub to the top. The sub will act as the crossover (since they are built in with their plate amplifier) so your tops will get only the signal that the sub is not able to play. If your tops are evenly matched with your subs, your system will be protected. The EQ should only be used for shaping the tonal structure of the sound source and for room correction. Never for speaker protection. You are right though, this DBX EQ (and every other graphical EQ) is behaving exactly how it was designed to.

@@nickloss2377 some people actually uses that low cut as "crossover" wanted to poke everyone doing that type of act. thanks for the comment and add up

@@nickloss2377 , Hello, Of course you can use low cut the way you like, but in my opinion you are wrong. Lowcut for mics normaly works around 80Hz not 50 thats too low, and lowcut for instruments should be at the input on the mixer so that it only affects 1 channel. Cause - when you use it on the eq which is placed after the mixer you lowcut everything incl kick drum and bass eg. So if you have subs on you dont want to cut ALL low end away :)

@@enchanter976 Thank you sir

@@sansaechao6298 As In

@@hidewong You welcome bro. ❤️

You welcome. The others is for customs settings as well you can patch things in advance there

@@krishnajadhav7836 please it can't be shared. You need to purchase it from their website

@@krishnajadhav7836 I used smaart for this. Visit www.rationalacoustics.com