Thank you for your teachings. But i have some questions. 1) which are the best preset channels to use in 3 ways and 2 ways settings? 2) which are the best filter frequencies to use in your low mid and high? 3) while setting your PEQ, what's the function of the F1, F2,F3, and F4. and how can you determine the right DB, the right BW and slope?. 4) In setting your crossover, what's the function of the slope. I mean, what does the do, or the effect of the slope. If i cut the slope, what will be the output. And if the slope is not cut, what will the output be? 5) What's the right frequency to use in setting a live band?
am sorry to say all this questions always depends on the gears you are working with. saying something about all that is not right. where are you located?
This is lovely my friend, Kudos. My question for you is, is it advisable for one to use the RTA for room tuning, this is because someone line me do not know how to tune room
@@adebiyioluwagbenga5596 Play back music that u hv listen to over and over. Play it through the speaker listen to what is missing and try to use the EQ to bring it in. Is not the accurate way. The best way is letting system engineer do this type of work. Where are you located?
Hello Mark. You can let the output from 1 to 6 for individual speakers. You will press and hold on the config bottom, in that procedures u can let each output be mono by unlinking 1 and 2 and 3 and 4, 5&6 is already unlinked. And I think you can do this at the I/O section but unless I look through it before I can give you more details
Hello. It depends on your Speakers that you have, remember crossovers,EQ and delay is included. You can switch between presets if one works for you, that will be cool.
Is not bad for a kick passing through your Tops. Kicks have high frequency formation as well. Should Incase you want more teaching ideas, contact me on +233574407447 let talk about pricing and I will teach you what you need to no.
Hello Nelson thanks for your comment. I was hoping to capture the switches and the screen at same time, so you will no where I press for that popup on screen. Will try to zoom in for you next time, thanks
Thank you for your teachings.
But i have some questions.
1) which are the best preset channels to use in 3 ways and 2 ways settings?
2) which are the best filter frequencies to use in your low mid and high?
3) while setting your PEQ, what's the function of the F1, F2,F3, and F4.
and how can you determine the right DB, the right BW and slope?.
4) In setting your crossover, what's the function of the slope.
I mean, what does the do, or the effect of the slope.
If i cut the slope, what will be the output.
And if the slope is not cut, what will the output be?
5) What's the right frequency to use in setting a live band?
am sorry to say all this questions always depends on the gears you are working with. saying something about all that is not right. where are you located?
This is lovely my friend, Kudos. My question for you is, is it advisable for one to use the RTA for room tuning, this is because someone line me do not know how to tune room
@@adebiyioluwagbenga5596 Yes please don't use the RTA to tune the room because it will give you something nasty.
@@samuelkennethacquah1068 Thank you for your response. Any advice on how to tune the room for a beginner?
@@adebiyioluwagbenga5596 Play back music that u hv listen to over and over. Play it through the speaker listen to what is missing and try to use the EQ to bring it in. Is not the accurate way. The best way is letting system engineer do this type of work. Where are you located?
@@samuelkennethacquah1068 I will try it. I am in Rivers state in Nigeria
@@adebiyioluwagbenga5596 @Ghana
Thanks I hv leaned alot, what is the use of the button named others.
You welcome. The others is for customs settings as well you can patch things in advance there
Okay so a good start up top outut
How to make the 260 work 6 way i want to use the 6 channel to play different signals
Hello Mark. You can let the output from 1 to 6 for individual speakers. You will press and hold on the config bottom, in that procedures u can let each output be mono by unlinking 1 and 2 and 3 and 4, 5&6 is already unlinked. And I think you can do this at the I/O section but unless I look through it before I can give you more details
Hi brother are the defult settings good on the driverack?
just want to know because i dont want to change anything
Hello. It depends on your Speakers that you have, remember crossovers,EQ and delay is included. You can switch between presets if one works for you, that will be cool.
Thanks bro
@@selectorcj2370 You welcome
I want to set my dbx for live band, but when I tried the kick was passing through the tops
Is not bad for a kick passing through your Tops. Kicks have high frequency formation as well. Should Incase you want more teaching ideas, contact me on +233574407447 let talk about pricing and I will teach you what you need to no.
Sorry we can see the display on lead please zoom the camera open thanks
Hello Nelson thanks for your comment. I was hoping to capture the switches and the screen at same time, so you will no where I press for that popup on screen. Will try to zoom in for you next time, thanks
Hi
Hello