Відео

I don't see the link to the stl file for the tablet mount

Hi, I have a Creality ender3 s1 pro printer, I don't have any problems with small prints, but when I want to print large prints, it says communication with the MCU is lost at different times and the printing process stops, when I want to continue from where it left off, it starts from the wrong position. Why does this machine give an error with large prints, I searched the internet and couldn't find much information that would be useful for me. I talked to a service and they told me that this could be due to overheating of the sonic pad, stepper or motherboard. I don't know what to do. Do you think cooling the steppers could be a solution, if you have published a video about this, I couldn't find it unfortunately. I would be very happy if you could give me advice. Unfortunately, I don't have enough technical knowledge on these issues. 😞

Great vid..this is exactly what I needed to hear/see and kudos on the bracket design ᕙ(▀̿̿ĺ̯̿̿▀̿ ̿) ᕗ

This does show a useful quality of 3d printing but that is not a food safe print and the carbon fiber will be embedded into your hand and anything you cut.

Great review. How often have you had to strip the head to unblock it. It’s the only thing I’d be concerned with following g your video. Great content, keep up the good work 🏴󠁧󠁢󠁷󠁬󠁳󠁿

I bought one from a bargain place for 5 bucks, I’m still wondering if it was worth that lol

wayyy too much dribble

I’ve been trying to set this thing up for 4 hours, it’s not straightforward when it doesn’t work as it’s supposed to be, google doesn’t help, Reddit gives only answers to questions I didn’t ask, discord doesn’t respond at all, error messages are vague and every hates you when you don’t understand them. And the touch screen is a living hell, some parts don’t respond at all. And all this time I could’ve just used a raspberry pi?

One diwn side of klipper is missiyout on resume printing due to powerloss

If you have a 7 year old printer is now worth 100 dollars max, it’s not worth of buying a raspberry pi to get clipper running on it, investing all of the time it needs to install , configure and tinker with it until it runs right. Marlin would be the easy shortcut to improve the result without much extra time spent. Clipper might speed up thing but the extra speed will also introduce extra problems in many cases , especially with cheaper hardware.

I had no idea how amazing Fusion 360 is until I saw your video. This video needs waaaay more likes!

Thanks for the video, been out of this side of 3D for a few years and it seems.... sure didn't slow down in my time away. I've got a HyperCube Evolution I build and moded a bit from the base project, it's ok or good, but never been FAST, so I tend to use only a small portion of the build area as filling it would be a multi-day print. So, I find myself looking to improve that and start using it again. I'm still using the ramps1.4 stack with Marlin (1.9 i think). Any recomendations on new boards, screens (touch if possible), drives? Hesitant with Klipper simply because I know my limits programming, if a base file for my printer is avalible, could probably stumble throught changing some parameters (size, setsp per mm...ect)

how do you disable macros? The one in particular is when I rooted my K1 Max it changed the purge settings. I can turn it off for that session but I've yet to find a way to fully remove it or at least have it disabled so I don't need to worry about it messing up my print. How do I do that? I'm running Mainsail.

Brother why did you stop uploading videos ?!

Needed this video!

DOOOOOOD long before 2011 I did it 2003 marlin!!!!!!!!!!

Was kind of shocked to find out the Ender 3 V3 runs the OS (Linux) and Klipper on board, no Raspberry Pi needed! Originally I was afraid of dumping Marlin and octoprint, but the Klipper system is much better and MUCH more configurable/customizable.

Thanks for the information! I dont have a printer yet but was s rolling the reddit and everyone has a raspberrypi it seems on there enders... just wanted to learn some more information before buying mine... (also waiting for payday)

Hi.plz come back because we need you most now.

Too. many. jump. cuts.

Blessed be thy JB Weld. 🙏

I have a spare Raspberry Pi but I never got around to installing klipper on it... for no other reason than I stumbled upon mriscoc's firmware and have been super happy with it's feature set and configurability. That being said, klipper may be something I revisit once I pick up my new Ender printer.

9:03 Couldn't agree more... I'm actually doing some final research on what I should upgrade my V2 Neo to, and I think the S1 Pro is what I'm getting in a few days when I get paid. I could save a few paychecks for a Bambu Labs, but to me the community support and open source nature of Ender's is what seals the deal for me. I started using Linux in 1996 so I'm not afraid of putting in some proverbial elbow grease to get something running the way I want it to.

You are right both Marlin and Klipper work really well. I used Marlin for three years and it worked well , although I did not config it I used Kersey Fabrications firmware which worked really well. Then I got bored one day and had a go at Klipper , because I am not tech savy it took six months of trying to get it to work. Now I would not go back I have it sorted and it is easy for me . I have not leveled the bed for a year and my start routine is the same every time . Home, z-tilt, home and print. No print failures for a year. Good vid 😀

10-50 !! 10-78 !! nobody noticed the JB-WELD in the screw holes that is now on the bottom of the Sensor. so now the Sensor AND Screws are JB-Welded to the badass bracket. lol good luck getting it off without cracking the housing of the sensor. guess you can always make another housing. lol. but i do like the idea of a Magnetic G-Sensor Mount for the Bed. and now, with just a small piece of steel mounted to the Extruder, the whole thing is easy to move from Extruder to Build Plate !!!! and just flip the X,Y,Z to any orientation on the Sonic Pad and you dont have to worry about breaking the sensor housing to get it off the JB Weld you didnt clean off from the bracket. rofl.

I’m thinkin’ your OS is running on “OG”-Code..‼️ Great Videos… Personality AND A Lot of useful knowledge and information… So happy I found your channel… Thanks for sharing 😛

I just got a used refurbished S1pro from Creality’s eBay store for $163, upgrading from an Anycubic Kobra Neo, can’t wait to use it for the first time

how can i make the back of it be able to stick to a shirt. well jersey to be exact.

Why did you make a cut after every third word?

Hello, I buy it but i don't know what nozzle has integrated, How can I know?

You can find the klipper settings plugin in the cures market place as well now

"because that's the all you ever need" Who wrote your script, Charlie Kelly? lol great video, all kidding aside.

For the macros can they be placed anywhere? Or does it have to be placed in a certain line

I was actually excited to do the process of setting up a pi and installing all the software and hardware but the price is just too high

That thing in your bed looks like a dildo.

Might need to update this video. Creality did come out with a new dry box, version 2.0. Works great.

An overall big picture is too important NOT to watch and learn. Thank you and thumb up for you as now i understand better of the firmware on 3 D printer. I am NOT new in firmware update and configure but i am new in 3 D printing and boy boy it is fascinating and fun to learn and make thing. I had bought the Ender 3 S1 and definitely will update to Klipper and a touch screen using an old Android phone.

Great Review, Thank You for your Time

woulda dropped a like but its at 420 and i couldnt mess that up, Great vid, THANK YOU!!

People are still using Cura? move on to OrcaSlicer.

Thank you brother, helped me out getting my printer.cfg file refined for my creatbot build.

I'm sure you can use acceleratorion control with klipper!

thanks for the lesson ;) i hope to see more about cura and clipper. I prefer to use a micrometer, the pressure you exert on the wheel is never the same

In the beginning of the video you compare s1pro with x1 carbon??? What kind of drug do you use my friend?? X1 is about 10 times more expensive. You can't compare a cheap Toyota and a s class Mercedes...

My firmware brings all the boys to the yard and they're like it's better than yours damn right it's better than yours i can teach you but i have to charge. I'm recently miffed at Marlin, due to probe bugs and bits of unrefined UX. I use a DIY servo probe. I have worked on bug reports and patches but ultimately didn't quite have the time to beat it into shape. I have planned Klipper for a while as it's the cheapest upgrade path with Pi0. But haven't made a jump to it yet. Not sure how well Klipper is going to work for me either, given i want to be able to drop the toolhead and replace it with say a Roland drag knife, maybe laser, engraver and other possible accessories. I think the best think about Klipper isn't input shaping, it's the correct jerk-free acceleration handling. I think a very good thing is being disregarded, RepRapFirmware, also known as the Duet3D firmware. It runs on LPC and STM32 processors and some control boards can be really inexpensive, it has built-in web browser controller, and it has all the same algorithms as Klipper, indeed originating many of them. Marlin attempts to reach for the same but the quality of implementation is so bad for the more advanced movement algorithms, the options don't work well with each other, the outcome is pathetic... it's understandable given Marlin has to remain compatible with 8-bit controller boards, but it's unfortunate. A firmware won't be really good at it unless it can pick one movement model and stick to it. There was also Smoothieware, not sure where it's at right now.

9 minutes of looking at a closeup of your head🙄 Not picking on you but the video would be vastly better if you spent more time showing the actual screen during the settings adjustments, not impersonating Max Headroom with 10,000 cuts. Also you never specified which gcode flavor to replace Marlin with.

I cannot paste the macro in my printer config. It gives me errors and wont let me update. I also tried to put it in the mainsail config but that file says read only for some odd reason. Any idea why mine is doing this? This is the error I get when trying to paste the macro into my printer config: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg' [line 11]: 'TURN_OFF_HEATERS ' [line 12]: 'CANCEL_PRINT_BASE ' [line 13]: 'G0 Z{z_safe} F3600 ; move nozzle up ' [line 14]: 'G0 X{x_safe} Y{y_safe} F20000 ; move nozzle to remove stringing ' [line 15]: 'M107 ; turn off fan ' [line 16]: 'G90 ; absolute positioning ' [line 17]: 'G0 X60 Y{max_y} F3600 ; park nozzle at rear '

Plug and play ? Glad you think getting it up and running is a snap - any experts out there want mine ? The sonic pad has kept me from using my printer for over a week. Painful AF

nobody NEEDS klipper. i just want to push my printer. its either klipper or linuxcnc.

Hello, what version of cure are you using, and why when you place the mouse on an option, an image appears showing what it is going to do and I only have text.