Відео

How heavy is the carry all and how does the 8n handle it? I have the TSC carry all for my 8n and trying to decide if I should do 4’ or 5’ width.

You should have run the roof panels in the other direction so that the snow would slide off!!

Yes great instructions, I haven’t tried it yet, but is it easier to take the blower off the tractor first?

Good video. I still have my 1998 Neptune and retired now and will be changing the bearings sometime. The drum still spins freely by my hand and I don't see any water leakage out the back. In fact it still looks new back there. My replacement in the mean time is a Speed Queen front loader. I've had it 10 years and I've only replaced the door lock mechanism and the front seal on it. My Neptune I think the motor control board went bad. It was doing weird things like it had a mind of its own. I have a new conversion motor and board ordered. The Speed Queen is one heavy washer. It has concrete blocks in the case to keep it from vibrating. I looked at buying a new Neptune back then but I read they were crap after Amana bought out Maytag.

Hi. Great job. Thank you for sharing. Where did u got it he siding from ? Expensive

I’m thinking maybe a drain hole or three for when it rains. Good job!

New bearings must be a QUALITY brand, or you will be doing this job again in a few months! Not cheap C*h*i*n*e*s*e crap like TSB, etc. Get SKF, NTN, Nachi, Timken, NSK, FAG or KOYO 6207-2RS and 6206-2RS, double sealed, with normal or C3 clearance. Beware, there's lots of fake / counterfeit brand-name bearings on e*B*a*y and A*m*a*z*o*n. If the price is too low, it's fake. Only buy from authorized bearing specialists.

try mixing you apple juice with apple cider vinegar salt pepper and garlic powder.

Drill holes in it. Put a small fan on low towards the hole this will give it more oxygen. Oxygen creates the elements you need for more heat.

I noticed that you built the structure on a concrete slab. To stop the sides from toeing out, I would recommend securing the base plate to the slab with Hilti bolts and washers. This would make the structure more secure and wind resistant. Nice job, by the way.

Ĺooks nice😊

Extremely helpful. Much appreciation for posting this.

Fantastic. Difficult made easy...

Ive been looking at an empty frame for 12 months or so. Thanks for your inspiration!

Any idea how to fix the wheel on housing not turning. It makes a loud sound but doesn't turn the blender

Mine just stopped working, I'm going to try this. Thanks for the very detailed video! Edited to add: Just did it this morning, and it's looking and working like new! Took me about an hour b/c I'm not as handy as you are, but hey - saved me a ton of $$, the hassle of going to the store for a new one (would have taken at least an hour), and now there's one less thing in the landfill! Thanks again, much appreciated. 👏👏👏

well done Canada

My issue is I can't get the cup out after blending, and i don't want to throw it all out 😢

ughhh mine has the vertical auger pulley I cannot find a way to get the belt on the pulley. HELP if anyone knows. blower for an LA165 tractor

Very nicely done, thanks!

Great job

Help needed! Followed the video to replace the belt on a used snowblower. We cannot get the pulley back onto the shaft. It does not seem to have enough "play" to straighten out enough to fit over the slot. No obvious damages or obstructions. Spent a couple hours so far on it. Anyone have suggestions?

Seems like Maytag washers and dryers break down more than other laundry top brands. My apartment building has Maytag washers and dryers and they are always breaking down.

I call bullshit

The answer is yes

Excellent... but, two of the fins on the motor cooling fan snapped off, breaking the gray plastic conical housing. I can't seem to find a replacement for the cooling fan. The other parts are available... but not that plastic cooling fan. Any idea?

Great video. Made it look so easy. Thank you!

Great video! About to do my washer in the next few days. I might have missed it, but what is the bearing Part numbers? 6207 and 6206?

Hi! Mine has a spark in the front air vents. Every time I switched the motor on. Is it normal? Or should I throw this away? I barely use this. And the product is almost 1 year only.

Please I need help with my nutribullet juicer,it smells like something is burning inside and is not working fine

I understand that the metal sheets oriented this way on the roof is easy to bend them on the sides where they meet the walls, however wouldn't this bad with water shedding or snow shedding? the ridges are not a good idea running like this? Otherwise the structure is really good.

Not bad

Brother I'm here to check off a honey do 😂 thank you!

Nice workmanship - respectable looking shed.

Great job..but activate system is shit ..Nutri bullet are a shity device...

Hinges are backwards should be behind the wood doors, should have put metal on front of door, matching way better, other wise i like it.

I’m attempting this today as the wife said it’s stopped working

Every 3 yrs? Why is mine done after a year 😫

I'm going to try this this weekend. Hopefully it works 💪

Thought about doing the same thing , but my don got me 2 big pcs of rubber roofing 10 x13 very heavy got the 1st one by fastening some pvc pipe to the rubber tied some rope to the ends of pipe & threw them over the top & pulled but the rubber didn't want to slide lot of friction not sure if this method will work for 2nd pc.

My Nutribullet stopped working a couple of years ago and it was my favourite gadget… now I have seen your video so sm thinking may be I should tackle it the way, as you did? But I am worried, as I have totally no idea how the wires inside are connected and I have no handyman in the house)))😂🤣

Thanks for the video. I found it was just one of the tabs that had broken off the cup/flask, whatever it's called, and was failing to push the switches down. However, only two of them are actually switches, so if we put the broken tab in the right position then it works fine. Cheers.

How much you charge for this job my friend.

I did mine about two years ago. I should’ve measured the shaft like you did. now at high speeds, it start to make noise again, so I wonder if I pounded the bearings and two hard sort of did the same thing you did when putting the new bearings I used the old bearings to pound in the new bearings however, at the end there was a torque rating on my sheet and I went with that for the final torque on the pulley in the back, my unit did not have that white plastic clip that goes in the tub in front of the bearing nor did I have a snap ring on the back of mine.

Thank you so much! Was able to repair my Nutribullet and get it operational again.

Thanks your instructions helped me resolve my leaking regulator 👍👍👍

Where is part two?

Thank you, clear! But what for is the little opening in the holdercompartment? Where is going the fluid? It reachis the motorcompartment? Dangerous?

A small plot like that you might want to try some sorgum, that would be a treat for the deer

Thanks so much!