Відео

You clearly saw that it was overfilled. Why didn’t you overfill it like your shifter and filling from the top? I hope that’s your truck.

thank you mate

Pies, I am doing the same wheel bearing grease packing on my D21 but how can one tell if the bearing seal was all the way down?

Isn’t there a spec for how you reinstall the bearing retainer? You’d have to press it in “overtorqued” first, then give it a few rotations to seat everything, then back it off so you don’t axially load the bearings. But I can’t find the spec anywhere. Great vid. Thanks for all the other little tips.

pure bliss

Nice but i'm confused as to why the game looks like 1000 fps yet the 3rd person video is like 12 fps... Old capture card?

Bro put the bering in backwards then skipped lol

Do you have a video or diagram on how you wired the ignition for push to start with no key? Thank you

Definitely don’t get thread lock! Then you won’t be able to do this every 3 years or whatever it is, also I read instead of the pump, you can just use a long hose and a funnel to save yourself the trouble, that works I hear, I may make another video for people like us. Thanks again bro!

Thanks for making this! I couldn’t locate the fill hole but was able to find it thanks to your video! Helped a lot! And I wasn’t sure how much oil to use. I have a 1997 hardbody, cool trucks! I’ve am had 2 now…first one lasted me 14 years!

Thanks a million. I thought I was stretching it with my 1997 PU. Why do they keep running?

Just get a long hose and run it through the engine compartment into the hole. Stick a funnel on the other end and stand up and pour.

Thanks

Hell yeah, finally a good DIY info video on this. Gonna refer to this video when I do my bearings on my ‘88 pathy and ‘02 xterra. Thanks man.

Whats the torque ft-lbs you used and whats the part number on the seal..i cant get to find this seal..i install a new 2 years ago and its leaking,due to the leak ruin my bearing..

Appreciate it man

Thank for video bro!¡

96 here,...What is it you put on the bolts before putting them back in?

My tack and coolant temp is also broken. not yet sure what is causing it, but will look into it to the next inspection

Would it be ok to run 75w90 Delo GL-4?

Is this the same procedure for the rear?

Thank you for the great video. AT 5:57 where the hub is connected back to the rotor, do you know the torque specfication on those six bolts?

It's there a way to simply check transmission oil beforehand? I see brake fluid, steering fluid and obviously the engine fluid, but no transmission 🤔

I filled my 1993 D21 with clear hose and gravity - push the clear hose down from the engine compartment, attach a funnel to the hose, then fill the funnel.

Was this a 2wd or 4x4

This was a 2wd right?

thats so funny my odo stopped at 202k

Great tires I bought a set for my 5th gen 4Runner, there great on and off road

5 quart's you need

Keep at it man definitely helped out big time thank you!

Did it take all 4 qts?

Is this a v6 or 4cyl ? I have a v6 5spd and it seems like my drain plug isnt as high as yours is in this video ? ........

Tankyou for making this video is very important

I have a 92 but i remember removing the gear shifter inside to add the oil

Ummmmm……you have the front end jacked up only. The vehicle suppose to be level when you refill the gear oil.

Gravity is your best friend. Fill from above. Hello.

Hey do you have any videos on doing the valve cover on 3.0

Looking at this, I'm honestly thinking I should just replace my bearings while I'm replacing the rotors. Got the same truck (except in purple) so thank you for this vid!

They are also available in stock Jeep sizes that many other top rated tires are not. Really surprised they are not at the top of more tire reviews.

My nissan d21 has 260k and I decided to drain the Trans (manual 5 speed) and all I got was a quart of ATF, not good! All I have is a bucket of straight 140 gear oil so I put that in it and it shifts nicely, I think after that many miles it deserves the thicker oil anyway.

Awesome video buddy. I have a 1990 nissan d21 and i am from canada too. Sask to be exact

Now do the rears in 10 minutes.....

Damn that's all? I'll have to rock this out. Thanks for this video!

Nice racing. Very cool!

I've got a 97 d21... Please advice... When do I know I need to change the oil, and there any area on the car where I can check the oil level or amount of oil thats in the trans... PLEASE HELP

Is this micheal cera

bro thank you so much for posting this video, by far the most in depth video for this truck 🤙🤙

No bearing preset? Wtf. Didn't even tighten center lock nut

Nice dnf. Very cool!

I have a 1997 hardbody, really glad I came across your channel. Thanks