Vanagonia
Vanagonia
  • 13
  • 100 680
MaxxAir Fan Install | 4x4 Sprinter Van Build | VanLife
Just in time for summer weather, the front and rear MaxxAir Fans are in!
If you have any questions on the install, please don't hesitate to comment below or reach out. We would love to help in anyway we can! :)
-----------------------
Products (what we used):
Maxx Air 7500K MaxxFan Deluxe with Remote - Smoke: www.amazon.com/dp/B002OW5JG2
Sprinter Roof Vent Adapter for 14" x 14" opening: www.ebay.com/itm/143539173702
Butyl Tape: www.amazon.com/dp/B00GMSPFNG
Self Leveling Lap Sealant - Black: www.amazon.com/dp/B01CZ2YSK8
-----------------------
ABOUT US:
We're Tyler and Aiste! We recently purchased a 2020 4x4 Mercedes Sprinter which we are planning to build out and take around the U.S. Join us on all the fun that is to come!
Thanks for Watching!
SUBSCRIBE & FOLLOW ALONG ON OUR VAN BUILD: ua-cam.com/channels/wsx2sK32sM6XBVqWUtpcog.html
FOLLOW US:
INSTAGRAM: vanagonia
Thanks!
- Aiste & Tyler
-----------------------
Tunes:
Vibe With Me by Joakim Karud @joakimkarud
Sunrise by baoj @baoj
Savior by Mona Wonderlick @monawonderlick
it makes me happy by Dj Quads @aka-dj-quads
Music provided by Free Music for Vlogs
#VanBuild #4x4Sprinter #4x4Van
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π²: 1 750

Π’Ρ–Π΄Π΅ΠΎ

CR Laurence T-Vent Sliding Door Window Install | 4x4 Sprinter Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 4,5 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
Here's how we installed the CR Laurence T-vent window into our sliding door! We are planning to add a few more windows once they come in, so stay tuned! If you have any questions on the install, please don't hesitate to comment below or reach out. We would love to help in anyway we can! :) ABOUT US: We're Tyler and Aiste! We recently purchased a 2020 4x4 Mercedes Sprinter which we are planning ...
2 Person Aluminess Roof Rack & Ladder Install | 4x4 Sprinter Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 6 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
After a patient 6 months we have finally installed our Aluminess Roof Rack & Ladder. We debated going to usual route and renting a lift, but were able to find a hack and save some money along the way! Here's how we installed our Aluminess Roof Rack with just 2 people! If you have any questions on the install, please don't hesitate to comment below or reach out. We would love to help in anyway w...
Mercedes Sprinter RB Components Bench Dinette & Bed Set Install
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 15 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
The 76” dinette/bed setup we purchased from RB Components was a quick and easy install. We would like to note that we took the van traveling after the install and to our surprise the bed was actually quite comfortable and the overall setup worked great! All in all, we are pretty happy with the product and ease of install. Check out our link below to see the exact product we bough. Full disclosu...
Roambuilt Side Steps Install | 4x4 Sprinter Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 7 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
The Roambuilt side steps are a great addition to our van exterior and were a quick weekend install. For those wondering, we opt for the "Ladder Compatible" set which stops 16" short of rear wheel arch. We are super happy with the quality of the side steps and are looking forward to more off-roading adventures. If you have any questions on the install, please don't hesitate to comment below or r...
Sprinter Van Flooring | Framing, Insulating & Waterproofing Plywood | Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 3,6 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
The floor is finally in and we are happy to be making visible progress on our van build! We laid the foundation for the flooring with aluminum, insulated with rigid insulation and finished the subflooring with plywood. In addition, we also added a few major aspects such as plumbing, electrical and an L-track for bikes (of course)! We are super happy with how the subfloor turned out and can't wa...
CR Laurence 2019+ Sprinter Back Door Window Install | Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 1,8 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
We finally found the nerve to cut a whole in our brand new van. A big one too! This video featuring IBPDog will show you the step by step process in cutting and installing back door windows in your Sprinter Van! Just like 99% of the time, we are super happy with how these windows turned out. We hope this video helps you decide if you want to install windows in your van yourself. If you have any...
2019+ Sprinter Van Stereo and Speaker UPGRADE!
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 20 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
As many of you may know the stock speakers in the 2019-2020 Sprinter (NCV3) models are sub par. With that we decided to upgrade our 2020 Sprinter van stereo by replacing all speakers, adding an amp and 2 rear speakers on the back doors. We noticed there weren't many videos on the process so we hope this helps anyone trying to replace their speakers and upgrade their system! Feel free to comment...
Sprinter Van Insulation - Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 1,8 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
The van build is coming along, finally finished most of the Sprinter Van Insulation. We are planning on finishing the rest once we start laying the walls on. In this video we also included a bit on insulting the headliner as well as adding our headliner shelf which we love so much! Feel free to comment below if you have any questions on this build and enjoy the video! ABOUT US: We're Tyler and ...
2020 Sprinter Van Door Panels - Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 7 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
Our Sprinter Van door panels are 90% done, we are planning to add cubbies in all doors for shoe storage and more. We will likely be doing this when the finishing touches are put on the door panels, so stay tuned! For now, feel free to comment below if you have any questions on this build and enjoy the video! FULL PARTS LIST: kit.co/tcalderone/sprinter-van-door-panels ABOUT US: We're Tyler and A...
Agile Off-Road No Rub Fenders - 2020 Sprinter Van Build
ΠŸΠ΅Ρ€Π΅Π³Π»ΡΠ΄Ρ–Π² 10 тис.3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ
We decided to install LT265 /70 R17 tires on our 2020 4x4 Sprinter along with the Agile Off-Road no rub fenders for clearance. Overall we are super happy with the results. We hope this video helps you decide if you want to go the un-painted Agile off-road fenders route aswell! If you have any questions on the painting or installing process or anything at all feel free to comment below! We will ...

ΠšΠžΠœΠ•ΠΠ’ΠΠ Π†

  • @Vera-xu3xw
    @Vera-xu3xw 4 Π΄Π½Ρ– Ρ‚ΠΎΠΌΡƒ

    So how did you line up the holes with the panels to the plus nuts?

  • @conscientiousdefector
    @conscientiousdefector 2 місяці Ρ‚ΠΎΠΌΡƒ

    Why?

  • @steven-adamski
    @steven-adamski 2 місяці Ρ‚ΠΎΠΌΡƒ

    Good job

  • @mikeinmon4997
    @mikeinmon4997 5 місяців Ρ‚ΠΎΠΌΡƒ

    Great video guys? Still happy with that window? Any issues, rattles or road noise?

  • @RR-ty6ki
    @RR-ty6ki 8 місяців Ρ‚ΠΎΠΌΡƒ

    Is it comfortable? Were thinking of having this as our main bed in our 144 sprinter.

  • @santiagopastranoosejos4430
    @santiagopastranoosejos4430 8 місяців Ρ‚ΠΎΠΌΡƒ

    good job !!!!!

  • @JuanCarlosYes
    @JuanCarlosYes 10 місяців Ρ‚ΠΎΠΌΡƒ

    I spray painted mine and it's still good

  • @kurtmcintosh14
    @kurtmcintosh14 10 місяців Ρ‚ΠΎΠΌΡƒ

    After watching this im not sure if im letting anyone do it mine. And i really want it done. Seems more complicated than usual.

  • @BreakingElegance
    @BreakingElegance 11 місяців Ρ‚ΠΎΠΌΡƒ

    seems like a waste of money to replace a part for only a basic color swap

  • @christopherjsmith27
    @christopherjsmith27 Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    Hi...what did you use to waterproof the plywood subfloor?

  • @charlia6131
    @charlia6131 Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    I’m looking for a place in Houston that can set mine up. Do you know of a place?

  • @vtranmoto
    @vtranmoto Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    How has the window held up over the last year? Looking to get some for my van build as well and I'm seeing all sorts of reviews out there for the CRL Windows but to me they seem the best option. Thank you!

  • @trex5724
    @trex5724 Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    would love to know how to remove the rail, I need to fix some rust thats behind it. There's zero info on youtube, only the bottom slider but not the track.

    • @TheGentilcores
      @TheGentilcores Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

      there's a couple clips within the video of him removing the bolts for this part.

  • @YuliyanYordanov-mo3fe
    @YuliyanYordanov-mo3fe Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    Hey amazing vidio and roof rack ! Can you tell me the height of your roof rack (distance between the sheet plate and the highest point of the tube) ? I want to make my own . Thank you

  • @MotoMiles
    @MotoMiles Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    Nooo it’s sold out 😒any where else sold?

  • @marshallz4
    @marshallz4 Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    no idea what happened

  • @demonhogo
    @demonhogo Π Ρ–ΠΊ Ρ‚ΠΎΠΌΡƒ

    Uggh no one shows wiring

  • @jujulepew
    @jujulepew 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    im keepin my finger ready to shut the volume down every time he is done talking. I wish that trend of inserting loud music in the edit is going to...fade away.

  • @agentdoubleo7636
    @agentdoubleo7636 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    hoenstly the most pointless thing, is it just a color change or somehow an upgrade LOL? you should have just sprayed them with plastidip for like 8 bucks

    • @Kenword69420
      @Kenword69420 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Ya not really an β€œupgrade” more like a colour change hahahaha

  • @Bowa4141
    @Bowa4141 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    any suggestions for getting the unused door harness pins out to reuse for the head unit? I've been struggling to get them out to reuse. Thanks!

  • @lyndagallashaw735
    @lyndagallashaw735 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    you made this look so easssssie. great work

  • @OzFamily06
    @OzFamily06 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Quick question before I purchase this kit... I want to add 2 sets of speakers in the rear in my '21 cargo sprinter... 2 In the walls and 2 in rear doors. Do I need 6 channel amp? Or this 4 channel will work? Thanks.

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Hey Oz Fam, no need for a 6-channel amp, you just need to split the rear channel between the mid and rear speakers. One caveat is that you’ll lose individual volume control at the van head unit, but that’s generally not too big an issue.

    • @OzFamily06
      @OzFamily06 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      @@vanagonia5196 Got the 609c for front and 2 629s for the rear. How/which attachment did you use for the tweeters? I cant seem to get them installed.

  • @thedalillama
    @thedalillama 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    I wonder if it would have been easier to install it as one piece. I don't have a 3 foot wrench.

  • @cnicoloff1384
    @cnicoloff1384 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    After watching this video I looked at my van to see if I have those rails on my 2022, which I do not. Did you buy the rails that you installed the roof rack onto? Great videos!! I'm just getting started and getting so many ideas. I love how you put the product name in the title too.

  • @_furygan_
    @_furygan_ 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    teyes cc3 ΠΌΠΎΠΆΠ½ΠΎ ΡƒΡΡ‚Π°Π½ΠΎΠ²ΠΈΡ‚ΡŒ Π² этот спринтСр ?

  • @2sherrymoore
    @2sherrymoore 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Looks great! You make the install look very easy, was it as easy as it looks? The video is so quick so I can’t tell for sure but it looks like you kept the door β€œhanging” while you changed out the rail, is that correct? Thank you so much!

  • @kylecarson2395
    @kylecarson2395 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    So why did you run new speaker wire to the doors instead of just splicing in the wire from the amp to the wire you cut from the head unit connector? Different gauge or wanted a continuous wire from amp to speaker without a splice or connector? Seems like you could have just run one 8 conductor wire to the head unit and made all your input and output connections there. I don’t know really anything about audio wiring so just wanting to see if there was a reason. Thanks

  • @MultiWhyhate
    @MultiWhyhate 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Would you show the bed(s) with the backrest in the "down" position?

  • @KyleStJohn-yd8pr
    @KyleStJohn-yd8pr 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Great video install! What tool was first used to clean the rough edges after cutting the roof?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      hey Kyle, thanks for watching! it’s a deburring tool to clean up the sharp edges, you can buy em at your local hardware stores

  • @ruthrodriguez2183
    @ruthrodriguez2183 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Can you please share where can I buy this bench dinnette?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      hey Ruth, you can buy this dinette on the RB Components website. it looks like they’ve since updated their site and have separate options/add-ons for each of the parts, the main benches can be found at rbcomponents.com/products/76-dinette-cloth

  • @kathyphelan936
    @kathyphelan936 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Have the identical van. What is the part number for that rack?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Hey Kathy, great choice on the van! This is the Aluminess roof rack, specifically the β€œSprinter 170 WB Regular Body High Roof -Touring Style - Low Profile - Perforated”.

    • @kathyphelan936
      @kathyphelan936 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      @@vanagonia5196 thx. did you have a long wait time from when you ordered it?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      @@kathyphelan936 yup, about 4 months. ordered in December, arrived in April

  • @dmwi1549
    @dmwi1549 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    They look awesome. Lloyd like a lot of bolts to flooring. Does R&B recommend tying in to wall or floor thru bolts to prevent assembly from coming out of the half inch ply if van is in accident? I’m always thinking about what may come loose when constructing my van so I thought I’d ask.

  • @limphopheko
    @limphopheko 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Nice work . I have 2019 too and wanting to do the same . So which pins in the back of the stereo go to the rear?

  • @chrislee1615
    @chrislee1615 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    How is the road noise?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Honestly, we noticed an increase in wind noise right after installing it. The wind noise at lower speeds isn’t bad but once you get to highway speeds you start to hear it. Not too bad, but definitely noticeable.

  • @joseyjose1
    @joseyjose1 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Hi I have a 2021 sprinter and I want that roof rack where did u get it can u send me the info it looks hot

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      hey Jose, this rack is a touring style perforated roof rack from Aluminess. You can order it through their website, we highly recommend it! www.aluminess.com/sprinter-roof-rack-build/

  • @richardyee8517
    @richardyee8517 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    What did you apply to the outside of the rivnut at 2:27 in the video?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Hey Richard, its Loctite Go2 Gel. We found that rivnuts sometimes slipped/spun if you didn’t tighten them just right (not too much, not too little). The extra bit of adhesive helps hold them in place as well as gives it a bit more of a waterproofing/seal around the exposed metals (even though we sprayed them with some paint too).

  • @MrTiminskii
    @MrTiminskii 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Hi. I have 2019 cargo without rear speakers. Want to add them. By any chance do you know what pins or wire colors are for the rear speakers? Thanks

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      hey Sergey, if you don’t have factory rear speakers you likely don’t have pre-existing rear wires either luckily the pins are still present on the wiring hardness, there are 3 pairs of empty pins above the pink & grey pairs of wires. those 3 pairs are left-rear, right-rear, and subwoofer; connecting to them will work perfectly

  • @frazierkowslofski5626
    @frazierkowslofski5626 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    This video is a mess to look at.

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      thanks for subscribing!

  • @lhl6760
    @lhl6760 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Good video. Also like your wheels, are they 16 in. What size tires..thanks

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Nope they’re 17”, BFG KO2 LT265/70 R17’s to be exact Unfortunately the 2019+ models don’t have enough clearance for larger than 16” stock, we had to install Agile Off-road’s aftermarket fenders in order to fit these. Super easy install, check out our other video for more details ua-cam.com/video/7aWPdvDQy_Y/v-deo.html

  • @rickshis2756
    @rickshis2756 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Great video. What colour is your van?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Thaks Rick! The official color name is β€œblue gray”

  • @Wakeup_grand
    @Wakeup_grand 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Cool man πŸ™

  • @vanbase
    @vanbase 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Thank you for posting this vid! It's the first I've seen of someone putting together the under-steering-wheel dash (ua-cam.com/video/RjB2UWmRwgY/v-deo.html)... I need to do this to wire in some new switches to the blanks on my VS30, and couldn't figure it out for the life of me!

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Glad to have helped, thanks for watching! You didn’t by any chance install a switch for a light bar, did you? If so, you may have to share some pointers with us as well, that’s on our list of todos!

  • @amandafrank2973
    @amandafrank2973 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Where did you get the window?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Hi Amanda! They are CR Laurence windows! Here is a kit of all our windows & where we got them: kit.co/tcalderone/sprinter-van-windows We got our windows from Campervan HQ but we're still waiting on the remaining windows from our order placed over a year ago. Seems like these windows are a scars resource these days, here are a few other places you can get them from: - Agile Off Road - Sprinter Parts Store - Van Windows Direct

  • @Aluminess
    @Aluminess 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    I love the creativity of mounting our roof rack next to a parking garage!

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Thanks!! High risk, high reward!! :)

  • @lurkeranjo
    @lurkeranjo 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Cant wait for the next upgrades

    • @vanagonia5196
      @vanagonia5196 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Thanks Allan, neither can we!

  • @petraroams
    @petraroams 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Wow that’s a lot of tube to cut not to mention the hard insulation - I not too sure I’d have propex under your floor….!?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Indeed it was quite a bit of cutting, but it turned out great and is still holding up strong. Thanks for tuning in!

  • @FreshCoastDon.007
    @FreshCoastDon.007 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    What's the width of the bed? Great build also :)

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Thanks!! The width of the bed is 69 inches, here is a link to the bed we ordered for more detailed measurements: rbcomponents.com/products/76-rear-dinette-bed-setup-w-under-sofa-storage-boxes-for-07-sprinter-vans

  • @reymique1558
    @reymique1558 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    Roambuilt sent me the wrong length (needed the ladder compatible) side step, still waiting for their response what to do with it.

    • @vanagonia5196
      @vanagonia5196 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      We had a similar startle as well; ordered the ladder compatible but the 144” sidestep showed up instead… or so we thought. Turns out the ladder compatible is ~2 feet short of the rear tire which is what makes it compatible with the ladder. Best case for you, you get two driver side steps for the price of one! Good luck with the install!

  • @Nick-ke7yg
    @Nick-ke7yg 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    What size tires did you install?

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Hi Nick! The tires are LT265 /70 R17 tires. Thanks for tuning into our video!!

  • @alanwestport
    @alanwestport 3 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

    It appears that there is little to no margin between the bottom of the glass and the door. I would have made a spacer that would hold the glass up from the bottom. The spacer would ensure that the tape wouldn't stretch down a bit during the drying period, creating an uneaven border around the glass.

    • @vanagonia5196
      @vanagonia5196 2 Ρ€ΠΎΠΊΠΈ Ρ‚ΠΎΠΌΡƒ

      Agreed! This is a great idea, definitely would have made it a less stressful install!! Thanks for tuning in to our videos!