Відео

@@tzxlyd3828 My thoughts on KBD: I like how Irving (owner) brings somethjng to the SC community. It'd made out of polyurethane and is durable. However, if you're looking for a personal review, I have never owned any of his products to properly do so. You say your bumper is ripped off and irreparable. What makes it irreparable? It's PUR plastic, there is a way. As for fitment, if you've read any and every review in any kbd kit, fit is darn near good.ibam a big confused in a few parts of your comment. "I saw them on car is less than" and "no body shops will touch the modello". If you can rephrase that properly it would be highly appreciated.

​@@Mikkelism Let me clarify some of my comments as you requested. I have no personal knowledge about the FRP bumpers - I was merely stating what I’ve been told by the local body shops in Louisiana. They told me they experienced problems with the FRPs for other cars in the past and it is their recommendation that I find a used bumper versus the FRPs. I was involved in what was essentially a 1 car accident to avoid a rear end. There was a previous accident that caused traffic to be backed up and quite honestly the police caused my accident by not positioning their vehicles far enough back to alert approaching vehicles of the stopped traffic. I ran off the road into an area filled with overgrown shrubs. When the car was pulled out the bumper was yanked off after unknowingly having rolled over a cement block with protruding rebar. Engine and wheel splash shields were ripped off too. I was told by a local body shop that the front bumper is trashed but you may be correct, it could be repairable with effort. The body shops just believe it is cheaper to spend $1,000.00 on a used bumper (if I can find a 97+ replacement) than repairing the original that is severely damaged. When I inquired from local body shops about the bumpers out of Cali (Duraflex) and Nev (Modelo Drive FRP) both companies sell similar products -- a fiberglass reinforced plastic front bumper cover. After watching your video, I believe you have personal knowledge about the SC300, so I was asking your opinion about the KBD polyurethane bumpers. The local body shops told me generally it is a lot of work to cut the FRP bumpers to fit so I was quoting them. This same alignment and fit issues, I was told about FRPs when I had to replace the bumper on my car in a hit and run accident almost 10 years ago. The damaged bumper I have now I found for about $700.00 in 2014 or 2015.

@@Seven8the0 It was great, thank you for asking.

@@Mikkelismfitment was good ? Looks sick

@@Seven8the0 Seeing as I made it for the car... Yes.

@@Seven8the0 Also, if you're looking for a better response, can you please try harder at forming fuller and better sentences? It would be appreciated. I just now see you mean fitment instead of former. Your comments are wildly off the video subject...

@@wallacepeterson5612 cool.

@@AnthonyLi-i7c No I do not. Your best bet would be asking the parts department/tech at a dealership.

@@llxVxll I don't see why not. Best thing you can do is follow this formula I've provided, go measure seats, but them, and figure it out (because I know those are slightly wired different and I never tried those seats).

Thank you!

Yes, I did.

Right?! No more leaves in that trunk jamb channel.

What would you think works best? Taking that audio and making it into a shorts format, using B roll with that audio as the voice over, or just doing podcast sit down episodes. If the last option, I'm having a hard time of people that actually want to participate with me.

@@Mikkelism yeah the first part. Sucks people will not sit down with you. But I can understand their culture is probably different. Maybe try to hookup with some of The other car UA-camrs who live in Japan and try to do some sit down pod casts. I’m sure Sammit is probably busy as hell though

Tabaka-san! Thank you for stopping by and letting me know your thoughts. I could not agree with you MORE than I already do. I was telling my wife how if the cargo room wasn't less than the #jzz30, I would have upgraded years ago. Don't get me wrong, it can fit young family and friends in the rear. But rear-facing baby seat era, and travel luggage might not have been the best for us.

I agree with you. It's amazing for what it is in this era of SUVs and electric cars trying to take over! Fun and sporty!

$1,000 to make one of what? The 97+ spindle grille?

I do not have them on me. They're in a file, in storage. Have you tried looking up the diagram on Google?

@@Mikkelism yeah I’ve been looking for like 2 hours and nothing I just want to see which one is the positive and negative only need it to be functional

@@Paisaxiv have you checked your local lexus dealer? That's what I did.

I just wanted to see if you could help me with the positive and negative wires for the seat

@@Paisaxiv I just did, since I don't have my diagram with me. Ask lexus service department they can hook ya up.

1. Buy the appropriate harness 2. Test wires, take note, cut old build that aren't compatible off, solder new bulb seated & wires to old harness.

It's vertex + N-stlye. N-style is well known within the SC/Soarer community. However, I don't think anyone has commissiones Hide N to make and send one to the states yet.

I made that one as well.

@@Mikkelismwhat did you use to make it ?

@@lilsleeper7043 measuring tape, OEM parts, study of OEM diagrams, learning basic bodywork.

You can find more on it, here: ua-cam.com/video/aM4rBBP2Okc/v-deo.htmlsi=P16dcEP-RWYlbFEO

You missed your chance. It was sold two years ago.

Thank you for watching and showing appreciation!

Right? They need some love.

私もそう思います。

Call it, the WAL-MART edition.

If I can find some more, I definitely will!

The wheels do look amazing. I'm pretty sure they've been moved, but rarely and the parked in the same spot. As for making an offer, I don't see many cars in Japan being sold personally like they do in America.

Yess'ir! It was good seeing you again brotha! Take care!

Headlights are OEM. I painted the housing years ago.

@@Mikkelism holy, how did you get them so clear?

@@manwithlongdong By installing clear lens. ua-cam.com/video/KA76VzZFSNg/v-deo.htmlsi=awNK03eDkdB1ZmtE Feel free to scope out my channel for more information and answers to your questions.

@@Mikkelism thank you, the video’s going in my build list for sure 👍

@@Mikkelism wow i just went thru a couple of vids on your channel and you seem extremely knowledgeable on the platform, thank you for going in depth and actually demonstrating how to do install some mods/remove components.

By oem style, do you mean a replica supra wing? Supra wings in general need footwork done. As the mounting surfaces are different.

@@Mikkelism I mean... I have a grinder xD

@@theharbingerofconflation time to do work.

@@Mikkelism gonna look 🔥 Time to waste money on Ebay

Don’t run anything bigger than 18s it will look like a donk. IMO. I’m running 18x9.5 all around with 255/35/18 tires. If you’re lowered you’ll need to roll the front fenders, cut the fender liners (on my setup) and do some grinding In the wheel well. In the front drivers side wheel well under the liner there is a wiring harness, this needs to be rerouted through the engine bay as it can be damaged by the wheel in the lowered car (plenty of videos on UA-cam). In the rear I shaved my fenders though you might be able to get away without doing that (camber). If your car is lowered and you don’t want a ridiculous amount of camber in the rear you’ll need adjustable lowers, adjustable traction bars, and adjustable toe links. The cheapest option would be Megan Racing which would be around 650$. I think front has a nice amount of camber for aggressive driving when lowered

CapCut

Whole breakdown can be found here. ua-cam.com/video/MASYhGy_P7Y/v-deo.htmlsi=uLKl_soNR0ZUmI3M

One company is finishing their final run with clear lenses. I think messy garage is making another batch soon.

Yes I respond, and I'm not a diagnostic center.

@@Mikkelism i wasnt saying you were but ok

@@Mikkelism do you know what could the whole driver side to misfire by chance

@@carlazuz7704 yet you message me with a very minimal detail issue to diagnose. On a video about seats..? Have you take a look at the basics yet?

@@Mikkelism bro yes ive watched ur vids thinkin u were chill but ig not u seem to know alot abt the cars sorry to bother u brother! have a good one

I did.

@@Mikkelism I like those taillights, I have a lexussc400 1993, custom, maybe we can change number , are you on Instagram

@@Mikkelism I have a custom lexus sc400 1993, I need those lights

@@wallacepeterson5612 Okay.

Thank you.

I made them.

What's up! It's holding up pretty well. I even used some heavy APC on the leather part to see if it would rub off. It did not.