Відео

Just bought a 3oo series, used. Couldn't have done this without you. So thanks!

0:20 What is zed?? I thought it was called Z lol.. same thing with my truck the dealer calls it a Zed71 but it's a z71.

Great video. Thanks!

Anthony i had a 1025r first, the reason I got rid of that tractor was i ran over a stub tree that was sticking up,when I backed up it ripped off the hydraulic filter underneath the tractor and broke it off the tractor the damage cost me 2,300.00 the tractor only had 3.5 hours on it, so i asked the dealer if they had a better solution for the problem they said that the 2025r had double the ground height, so I bought it very happy with the taller tractor

you are nuts i have a 15 years old one and it is still great z720a

Hi Anthony. Thanks for posting this! Have you tried using it to level a lawn?

I got myself one of the John Deere 2025r tractors it's my first tractor

Thanks for the video. I'm looking at these two right now.

Very good now I want a 2025r

It's a good thing he picked this year model because cheap John Deere took away the belt loosening rod that this deck has and now requires you to have your own 3/8 inch ratchet wrench to take off your deck. It also requires you to perform a gymnastic maneuver to use your own tool and at the same time reach under the tractor and with your left hand while on your knees, pull back with the 3/8 inch ratchet, and then reach under the tractor with your right hand and take the belt off of the pulley. This must have saved JD $5 per unit but made taking off the deck 3 x harder. This is JDs history. Not making the tractors better but cheaper for them. They also made the two "J" hooks so that the hook end will not come out of the lift arm so that you can twist it to stay locked out of the hole. Now you have to fight the deck and the lift arm while holding the "J" hook toget it to release. It is fixable by cutting one circle of the spring off but why did they make this change?

Steel rear ended too VS the 3035E is cast aluminum… yes??

I have a x360 early 2004.? And this mower is setup much different then mine... Mine is a pain in the ass to remove.!

Care to give us an update? I’m looking pretty hard at this one or a 920M.

Love the videos but please invest in a microphone.

What do you think about the Tweet tires compared to the conventional tires? Do you get any turf scuffing when turning? Thanks

Hinomoto HM255 great tractor ua-cam.com/video/9T7AsogUxO8/v-deo.html

Thanks for this video, especially the lift portion. One thing…not my business, but I’d like you to be around to make cool videos for a long time. A little bit of effort to lose some weight will make a huge difference in many areas of your life. Ask me how I know :)

good video. a real world test with heavy wet snow. most guys are showing light powder. Good job.

Nicely done. Thanks.

What size blade did you go with?

Not sure if you’ve mentioned it but do they have the exact same motor?

Please make a video on how to put the snow plow on!!! I can’t figure it out!

This is the most comprehensive review I have found. Thanks for making the video.

Thanks for a useful comparison!

if youre gonna make a review ( i know this was 2 years) at least know what the hell youre talking about...9 gauge deck. not 7.

Agree taller tire adds ground clearance, but would it also give some more turning torque with increased radius from the center of the hub to the edge of the tire? Not sure about my terminology.

What size are those tweels ??

So if you don't buy a 1023e you might as well go ahead and buy 2025r?

Since both have the same loader, same horse power etc why would the 2025 have more lift power?

Do you have a mechanical thumb to fit my JD 260B in stock . . .is cost and shipping included . . .Im ready to buy today..

Great vid but I would have done everything then rip and level driveway last to not mess it up again just cosmetic

New tractor owner here, just got the 3035D, haven’t received it yet. Do have to use the clutch to go back and forth between forward and reverse? Or can you roll to a stop and slap the lever into reverse?

Son of a bitch! I’ve worked on hundreds of mowers. I’ve never had a problem removing or installing a deck. Today I was trying to put the deck back on a John Deere X340. I could not get the deck hangers to lower. So I’m out there spraying PB Blaster on shit thinking it’s seized. Trying to work the pedal back and forth. Just exhausted and pissed. Called it a night. Came in, took a shower, ate dinner. Thought I would see what I could find on UA-cam. Found your video. Just went back out to the shop and set the knob to the blank spot. Pulled up on the pedal, and pulled the deck lock up. The deck hangers are now down where I can easily install the deck. Damn it. Thanks for the video.

Great Video. Do the Tweels come standard on the Z740R or are they extra?

Thanks, Mr. Allen. I'm torn between 1025 and 2025. I've sat on a 1025, but haven't yet seen a 2025. The 2025 ;looks like it has a little more room in the operators space?

Question when you don’t have an attachment hooked up do you have problems with your lift arms not dropping?

Are these items available to order through all Green Diamond stores or just HFX?

dude aswame topics

wow, GREAT music video! turn the music up, I can barely hear it over all that noise!

I have the same deck and have not seen the type of mulching kit that you and I have. Is this an OEM kit? The plastic is throwing me off. I have had several x300 machines and never knew about pulling the pedal BACK to facilitate things. Thank you!

Slightly bigger pump + slightly shorter loader arms = the difference

2 year warrenty stinks I like jd will never buy a different brand but some other brands have a longer warrenty and 10 year warrenty on the decks they have the same engine and couple hundred dollars cheaper why is that

I like my.new 2020 e130 but it sucks on gas wish it got good gas like my la 125 21 hp single cylinder I think is a better engine

TURN THE MUSIC UP LOUDER!!! I CAN BARELY HEAR IT OVER THE FUCKING MOWER!!!

A turning radius test would be great to see.

I Really enjoyed this video. I recently started a UA-cam channel about the Hobby farm that we maintain with our 2038 are so I understand the amount of effort that goes into recording while you’re trying to get work done

does S houle make blowers any more? i thought maybe people weren't willing to pay for their level of quality, it was expensive.

it is not a subframe backoe this just 3 point it not to hard in motor and transmission joint

My customer brought one of these in for repair. 8.5 hours and the blade engagement cable/lever is having issues. And the throttle is ceased. I couldnt help but notice how much cheap plastic they are using on these new E models. The hood hinge is a flimsy plastic, the pto cable bracket is plastic (which is causing the issue), and the throttle lever is a cheaper plastic than before. Also, they use a cheap single steering arm system. Older models and higher end models use a 2 steering arm system. And the icing on the cake, an unreliable briggs engine. Unless you have a rental property, go for the X series with a Kawasaki.

Same i do have one to i like these ones better than kabota