Відео

@@fabrytomas Thanks!

@@dablet From pswpower.com or from aliexpress.com. The blue gear is different for TSDZ2B, because there is not freewheel inside.

Thank you. I could have made the video a bit more detailed. I put the original gear back in, I thought the grease on it was enough. Plastics are porous and retain the lubricant quite well, which they slowly release. The new gears should be lubricated with some kind of synthetic-based grease. As e.g. the MOLYKOTE EM-50L. It can be seen in my hand at 6:41, the splined cylinder itself is the metal hub in the blue gear, the freewheel is hanging out of it to the left. I roughened the inside of this splined hub with center punch and glued the freehub with Loctite 638 (hub glue). For gluing, superglue would probably do, but you have to work very quickly with that, otherwise the two things will stick together in the wrong position. The splined hub then needs to be inserted into the blue gear so that the freehub works correctly. There is also a mark on the freewheel, before disassembly you have to note which side of the gear the mark was visible on.

How can I get in contact with you? I have 2 questions about this mid drive motor, the guy who sold it to me, told me to wait until the blue gear is really damaged, but I guess I can fix it before that... It's just the noise, too loud, the motor. It's running almost at the same power like before( 2 years ago, 20kg less) ​@@mcelec7603

Standing ovation for you🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

@@estebania40 🫡🫡🫡 Thanks Dalia 🫡🫡🫡

Those days would have lasted forever if it weren't for GenX who went mad with credit cards on shopping. Over consumption led to massive debts and total decline of culture.

Merci pour votre retour!

Thank you! 67 seems ok.

Not bad for 13,000 km without a fault. I recently replaced the second torque sensor after 15,000 km. A year after making this video, when I heard the squeaking again, I realized another possible cause of the squeaking. The shaft resting in the torque sensor also makes such a creaking sound, on the right side. This can also be eliminated by spraying a little oil spray. Maybe I should indicate in this video that it is not necessary to completely disassemble the motor, maybe a few drops of oil or if we grease the axle is enough. ua-cam.com/video/7Rcwg_z-67Q/v-deo.htmlsi=Zm3ptU1tyKYgxxza And even this video is not completely accurate, because I think it's not the sprag clutch that squeaks, but the pedal axle as it rests in the torque sensor.

Interessante. Acho que você não apenas trocou a bateria, mas também o outro cabeçote de carregamento e o cabo que experimentou. Não tenho mais a câmera, mas lembro que ela tinha uma função de reset no menu.

Both have advantages. The TSDZ2 has torque sensor, thus the riding experience is very natural. An ideal training partner, the harder you press the pedal, the more assistance it gives. Because of the torque sensor, it is more complicated and more prone to failure. If it's important for you the natural riding experience, the smooth operation, choose it. The BBSHD is a very reliable motor with low maintenance requirement, but a bit too strong for a bike in my opinion. If raw power is important to you, if you want to climb steep hillsides, you can choose the BBSHD, but this performance will require a strong frame and a high-capacity battery. (The more powerful the motor the larger the capacity of the battery is needed so that the battery can withstand the higher current consumption.) I haven't tried the BBSHD yet, but I had a PAS sensor bike , that's why I say torque sensor drive is better. So it is not so easy to decide which choice is best for you.

Hi, I only had the scooter for a short time for repairs. On the motherboard, I would check whether there is a cracked solder, and I would check the connectors of the cable ribbons of the display (touch screen).

I smile because I told my wife almost the same thing a week ago.😃 One of the rear suspension components had broken then. Now I'm trying to identify a crackling sound. It seems the technology has had enough of the 5000 km a year.

ua-cam.com/video/Gp6vJy0GpWc/v-deo.htmlsi=IKgUBullpO3IDHPu я тоже люблю что нибудь чинить свой автомобиль например.. наверное я плохой водитель 😅

Thank you! I haven't installed a TSDZ2 with a thumb throttle yet, but I've encountered such a problem before. On one Kugo scooter, the sensor leg was broken in the throttle lever, on one e-bike the wire was broken at the base of the thumb throttle , and on another the connector had a contact fault. The TSDZ2 has pretty good connectors, so maybe the problem won't be there.

Thank you!

Thank you! For me too, it was a dream come true to visit NYC. For me, it was the many Hollywood movies set in NYC in the early 90s that got me in the mood to travel. For example the "Sleepless in Seattle" with Meg Ryan and Tom Hanks. For many reasons, it is very sad that you can no longer visit the Twin Tower.

11 jears old? You mean years?

You can still visit empire state building

I just tried it, with the latest version (3.59.1.0) and with the default settings, it can merge 360-degree videos. Of course, the video codecs must be identical. Unfortunately, I have not yet found a solution for the starting view of the given 360 video segment. That is, if, for example, I want to start with the sky in one of the scenes, how can I do that in Insta360 Studio. With the "Direction lock" switch, you can move the point of view somewhat, but it is not exact. Probably, the camera should be in the desired direction when recording.

​​@@mcelec7603To be more accurate, LosslessCut is able to merge the videos, but to get the projection metadata back in to be able to move/zoom, I had to use this ExifTool command. exiftool.exe -api largefilesupport=1 -tagsFromFile SAM_100_0214.mp4 -all:all SAM_100_0214-merged-1713395048013.mp4

At 0:18 you mean the slightly rusty plate to the right of the crown nut? That plate is just to protect the engine from rotation.

@@mcelec7603 yes I thought so, but as the motor tries to rotate it pulls the edge of the plate onto thetube, the bottom bracket housing, possibly putting pressure on the drive shaft. Well in any case you had a rare freak failure of parts

Thank you!

I'am so sorry!... honfitárs.

Siofok, Beach House, Matroz Disco, a lot of parties, lots of cheerful girls and boys. What a nice memories!

Merci!