Відео

Great review. I’ve had great luck with their smaller stuff. I’m glad I saw this before buying their S&D set. I would have been disappointed

They sell an adaptor on ebay for the polisher with an er11 collet to accept 1/8 and 1/4 shank, it doesnt stick out much at all

Okay so Home Depot has two 5 ah high output batteries and a charger for 200 and a free tool and this is one of the free tools. But I want to buy it so I can get the new impact wrench that’s coming out at the end of the month so instead of paying 350 for the impact two batteries and charger I can spend 400 and get two better batteries a charger and a ratchet and a impact driver so I think that would be they way to go. How do you feel about that way to go spend 50 to 70 more dollars cause of taxes but I’m getting better batteries and a ratchet. I think that is the way to go and if I don’t want the ratchet I can just return it cause it’s a bogo deal anyway.

I bought the $90 Pittsburgh set and it was decent quality for Chinese. Also, the only place i could buy metric sizes locally as well

Snap-On was a waste of money. Could have spent that on more quality tools. Tool truck brands are overrated and overpriced. Proto, Wright and Williams are cheaper and in tests that I've seen are better

I have watched dozens of these Bandsaw conversions some extensive and expensive and others simple and low cost. All before l decided what I was going to do. I’m glad l made my own table stand for the Klutch Portable Bandsaw. All out of scrap stock that people threw away. So pretty much close to zero cost and it cuts perfectly square.

Wholesome AF man thanks for the upload

None of my stuff has needed to be Snap On except flare nut wrenches. That said, plenty of stuff from Snap On that I prefer. I have sooooo many more wrenches I want….. I have some Dewalt hand tools I wouldn’t purchase again.

Worst offender is Matco though they don't even make USA available anymore but sometimes charge even more than Snappy. Thanks for the peek.

I bought these, saw the warranty and feedback was high....your spot on. Absolutely junk, they cost me so much money with breaking off in holes. Absolutely you are spot on...bought because the said USA... So sad...

Came for the take down, stayed for the father/son interaction, entertained by, "she annoys me with her voice." 🤭😆🤣

That little gent is a treasure! Curious and smart as a whip!

Snap-On is overrated and overpriced. I'll gladly buy Williams over them. I already own some of their ratchets and sockets is next on the list

Lmaoo have the snap on its so fucking loud I hate it

Thank you for showing these two tools. I just snagged a deal on that die grinder from Home Depot. I’m on the fence with the polisher because I have several hammer drills that can do the same but at a lower rpm and they are brushless. All I would be doing is polishing and that should be more than enough rpm wise. I think the die grinder might be a good candidate for some headlight polishing too due to its right angle. Thank you for the insight and a brief showcase on some real world thoughts on these two.

Does anyone know if the handle is 10mm or 8mm?

My daughter asked the same thing when she was on the quad.

Well I'd call you a harbor freight shill but you have a good taste and pick up stuff that's good value! 😜 I have done the same thing in my circumstance and kind of have...

Nice

Excellent vid. What I needed

I like it

Awesome vid. Sweet A$$ knife

Another great vid. These are presented so well and are super informative in the way you need. Thanks bud

Great vid. Excellent explanation and presentation. Have the die grinder alreader. Now I want the polisher as well😂😂

Because men keep things working. The easy way would be to get a new one. Plus, the deal he made with his son was priceless. You can't have moments like that at the store. Good job sir

I don't know about now. I was going to try and get warranty on proto tool. They wanted original paper work. To show you bought it. Probably need to have a notary stamp on it. Signed by the governor. I knew them never buying proto

Waiting for chronograph test

yeah I was looking for a 21mm from Snap-on. Blue-point makes it but it's not USA.

Disabling the safety: “I’m not responsible for protecting you against your stupidity”. A great line I heard from a YT welder

Would have been a good video without the child

You are comparing full price to discount online retailers now if you pay full retail and zoro only warranties for 1 year and you are at the mercy of Stanley black and decker

pitiful.

Light newbie. Can you use a dremel ultra saw as an alternative to an angle grinder?

6:05 😂

Love your Tombstone reference at 7:05 Fun fact, the famous saying “ I’ll be your huckleberry” is actually him saying “ I’ll be your huckle barer” A huckle is the handle on the side of an old casket so the guys carrying the caskets were called huckle barers.

This is why I went with the ACDelco ARW1210-32 3/8-Inch Li-Ion 12V Cordless Brushless Motor Ratchet Wrench Tool Kit, 65 Ft-lbs Max I bet it will break that loose

I popped over for some tips on fixing my Bug-A-Salt and found just what I needed. I must say, I was thoroughly impressed by your patience and how you interact with your son. We could certainly do with more fathers like you.

I received a gift set of fractional bits that were marked china. Drilling a 3/8 hole, the bit bent. Didn't break, but bent. Thanks

Thanks for your video! I learned exactly what I needed to do to fix my Bug a Salt!!

Like you spending time with your son. But, you left out the most difficult part of dis-assembly. (BARREL SEPARATION),

Such a great dad.

Nice comparison. I appreciate the proper verbiage and terminology to accurately give descriptions of each tool and their capabilities.

I’ve had the die grinder for a few years and the cut out function has become increasingly frustrating. I think I might buy the polisher seems to have more balls

A lot of sets exclude the 16 and 18 to get you to upgrade to a more expensive set. YES , there should be a 16 and 18 label.

dude youre a pretty cool dad with a pretty cool kid

its the little things 👍🏽🔥

I have the 13 amp 4.5-6" grinder and it's a beast. It's kind of big though, I might grab one of these too when it goes on sale

Great video and explanations, I have the die grinder already but didn’t know the difference between a buffer😂 I have a cheap Harbor freight rotary polisher so I’ll stick with that for now for buffing, I mostly do wood work but needed a metal finger for restoring my owl VW

Now they have the Series 3 out and they have 72" top toolbox OR top hutch and side lockers now on either side or both, still have the side toolbox tho. I had to upgrade recently when with the toolbox + top hutch + side locker went on sale for 25% off, all three cost me $2,250. I love greys and silvers, and I got the Slate Grey in all 3, might buy a side toolbox one day if i max these out.

This is a cheap hobby saw for casual all round use with a multi use blade. Of course a dedicated saw with a dedicated blade costing three times as much will be better. Good call on the blocking, it’s so corrupt, same with most detailing products and guitars.