![A2RC](/img/default-banner.jpg)
- 93
- 73 599
A2RC
United States
Приєднався 19 чер 2021
Advanced RC Adventures (A2RC)
- This is a channel where we investigate, explore, build, explain, upgrade and advance Nitro RCs to another level
- Lets Start a New Adventure Together
#NitroIsTheBestGo
- This is a channel where we investigate, explore, build, explain, upgrade and advance Nitro RCs to another level
- Lets Start a New Adventure Together
#NitroIsTheBestGo
HPI Nitro R40 POV Adventure - OS 12TZ T5 Speed Run
Feel free to check out another POV Speed Run Adventure:
- HPI Nitro RS4 2 POV Adventure - Modified OS 15 CV-R Speed Run
ua-cam.com/video/aPs4WXh1f98/v-deo.html
This is Advanced RC Adventures (A2RC)
- This is a channel where we investigate, explore, build, explain, upgrade and advance Nitro RCs to another level
- Come start a new adventure with me
#NitroIsTheBestGo
Vid made with Clipchamp (audio is not mine and is from the Free Clipchamp options)
- HPI Nitro RS4 2 POV Adventure - Modified OS 15 CV-R Speed Run
ua-cam.com/video/aPs4WXh1f98/v-deo.html
This is Advanced RC Adventures (A2RC)
- This is a channel where we investigate, explore, build, explain, upgrade and advance Nitro RCs to another level
- Come start a new adventure with me
#NitroIsTheBestGo
Vid made with Clipchamp (audio is not mine and is from the Free Clipchamp options)
Переглядів: 227
Відео
HPI G3.0 HO - High Output Nitro Engine Overview - Force .18 Connecting Rod Puller
Переглядів 43921 день тому
Feel free to check out the other Engine Overviews Shown in this Video: - HPI Racing G3.0 - .18 Nitro Engine Overview - FORCE Engine Manufactured ABC Construction ua-cam.com/video/qUH6MryxZtQ/v-deo.html - HPI T3.0 vs 18 CV-R - Nitro Engine Overview - OS meets Force ua-cam.com/video/XWYmUdooB64/v-deo.html - Novarossi C-12 R3 - Full Nitro Engine Build - Crank Mods, Building Tips, Bearings and More...
HPI T3.0 vs 18 CV-R - Nitro Engine Overview - OS meets Force
Переглядів 486Місяць тому
Feel Free to check out the other Nitro Engine Overviews shown is this Video: - HPI Racing G3.0 - .18 Nitro Engine Overview - FORCE Engine Manufactured ABC Construction ua-cam.com/video/qUH6MryxZtQ/v-deo.html - OS 18CVR - Nitro Engine Teardown w/Crank and Head Swap ua-cam.com/video/ha5bsUDrlNY/v-deo.html - STS 853 12R T5 - Modified Team Edition - Nitro Engine Overview ua-cam.com/video/Ni720rLqqB...
HPI R40 - GTP 962 Porsche Body - Nitro Speed Run - Custom RC Paint Job
Переглядів 2692 місяці тому
Come take an Epic Adventure with me! We complete a new Speed Run body for the HPI R40 1/10 Nitro Race Car Note: All of our Adventures are designed to be watched with AirPods or Wireless Studio Headphones - Always trying to provide a better Experience for you - Thanks for Watchn' This is Advanced RC Adventures (A2RC) - This is a channel where we investigate, explore, build, explain, upgrade and ...
HPI Racing G3.0 - .18 Nitro Engine Overview - FORCE Engine Manufactured ABC Construction
Переглядів 8412 місяці тому
Feel Free to check out the other Adventures shown in this video: HPI Nitro RS4 2 - Carbon Fiber Overview -T3.0 Engine ua-cam.com/video/STBxUqo2ATA/v-deo.html Carbon Fiber Nitro RS4 2 - POV Adventure - Ends in Crash - Insta360 Go3 ua-cam.com/video/X-deaZ2gD9M/v-deo.html HPI Racing 15Fe - Hidden Boost Port Revealed - Shuwa Toki Nitro Engine Overview ua-cam.com/video/TNXLy_qTuWg/v-deo.html OS MAX ...
HPI Nitro RS4 2 - OS 12TZ - Engine Install Prep - 2 Speed Clutch Flywheel Engine Mounts
Переглядів 4943 місяці тому
Feel Free to check out the other Adventures shown in the video: OS MAX 12TZ T3 - Nitro Engine Overview - ABC Club Racer ua-cam.com/video/oF69NlLVAYg/v-deo.html HPI Nitro RS4 2 - 2 Speed Transmission ua-cam.com/video/RvPbhHAoRqk/v-deo.html HPI Nitro RS4 2 - Brake Overview - Carbon Fiber vs Fiber Disk ua-cam.com/video/NaEIGkWd2MU/v-deo.html This is Advanced RC Adventures (A2RC) - This is a channe...
OS MAX 12TZ T3 - Nitro Engine Overview - ABC Club Racer
Переглядів 5913 місяці тому
Feel Free to watch the other Engine Overview shown in this Video: HPI Racing - Nitro R40 Hara Edition Overview - OS 12Tz T5 ua-cam.com/video/VwoB46ELwfg/v-deo.html LC 12R Pro 3 - Lamberto Collari - SIRIO Nitro Engine Overview ua-cam.com/video/_Mpw18KDFrg/v-deo.html Dynamite Mach15 - Nitro Engine Overview - Crazy Nut Racing ua-cam.com/video/y7AloUSNKOE/v-deo.html STS 853 12R T5 - Modified Team E...
Thunder Tiger Pro15 BZ Magnum - Nitro Engine Overview - ABC Construction - Similar to OS 15CV
Переглядів 3054 місяці тому
If you wanted to check out some of the other Engine Overviews shown in this video. Feel free to check them out here: HPI Racing 15Fe - Hidden Boost Port Revealed - Shuwa Toki Nitro Engine Overview ua-cam.com/video/TNXLy_qTuWg/v-deo.html OS 12CV Hyper Nitro Engine Overview - HPI Tuned Pipe A950 ua-cam.com/video/0H5SYB_7oPM/v-deo.html Nitro Race Engine - ENYA 11CX - Ceramic Bearing Swap and Overv...
Speed Run Area Update - HPI R40 Street Bash - OS 12TZ T5 Nitro Engine
Переглядів 2564 місяці тому
Speed Run Area Update - HPI R40 Street Bash - OS 12TZ T5 Nitro Engine
Flood Run / Speed Run Area - Future HPI Nitro R40 Speed Runs - Hara Edition
Переглядів 2814 місяці тому
Flood Run / Speed Run Area - Future HPI Nitro R40 Speed Runs - Hara Edition
OS 12CV Hyper Nitro Engine Overview - HPI Tuned Pipe A950
Переглядів 8854 місяці тому
OS 12CV Hyper Nitro Engine Overview - HPI Tuned Pipe A950
HPI Nitro RS4 2 POV Adventure - Modified OS 15 CV-R - G Force Acceleration + Speed Run Bonus
Переглядів 3615 місяців тому
HPI Nitro RS4 2 POV Adventure - Modified OS 15 CV-R - G Force Acceleration Speed Run Bonus
HPI 12R XS Nitro Engine Overview - Novarossi Inspired R40 Hara
Переглядів 5735 місяців тому
HPI 12R XS Nitro Engine Overview - Novarossi Inspired R40 Hara
HPI Racing - Nitro R40 Hara Edition Overview - OS 12Tz T5
Переглядів 7475 місяців тому
HPI Racing - Nitro R40 Hara Edition Overview - OS 12Tz T5
500 Sub Special - 1/10 Nitro that HPI Racing NEVER Made! - Nitro Rally
Переглядів 2276 місяців тому
500 Sub Special - 1/10 Nitro that HPI Racing NEVER Made! - Nitro Rally
K&B 18 Auto - Nitro Engine Overview - HPI 15Fe Shuwa TOKI Inspired
Переглядів 7006 місяців тому
K&B 18 Auto - Nitro Engine Overview - HPI 15Fe Shuwa TOKI Inspired
HPI Nitro RS4 2 POV Adventure - Modified OS 15 CV-R Speed Run
Переглядів 3,8 тис.6 місяців тому
HPI Nitro RS4 2 POV Adventure - Modified OS 15 CV-R Speed Run
HPI 12e - Full Nitro Engine Build - TOKI Shuwa 15Fe Comparison
Переглядів 1,1 тис.6 місяців тому
HPI 12e - Full Nitro Engine Build - TOKI Shuwa 15Fe Comparison
Modified OS 15CV-R Install - 2 Speed Transmission Update - Purple HPI Nitro RS4 2 First Start Up
Переглядів 5577 місяців тому
Modified OS 15CV-R Install - 2 Speed Transmission Update - Purple HPI Nitro RS4 2 First Start Up
Team Infinity Katana 512 - Velocity Stack Secrets - 5 Port Nitro Race Engine - TOKI
Переглядів 4267 місяців тому
Team Infinity Katana 512 - Velocity Stack Secrets - 5 Port Nitro Race Engine - TOKI
OS 15 CV-R Modified Sleeve w/ Ceramic Bearing - Nitro Engine - Purple Nitro RS4 2
Переглядів 1,2 тис.7 місяців тому
OS 15 CV-R Modified Sleeve w/ Ceramic Bearing - Nitro Engine - Purple Nitro RS4 2
HPI Racing 15Fe - Hidden Boost Port Revealed - Shuwa Toki Nitro Engine Overview
Переглядів 1,7 тис.8 місяців тому
HPI Racing 15Fe - Hidden Boost Port Revealed - Shuwa Toki Nitro Engine Overview
Nitro Touring Car Racing - Foam Tire Turning - 101 Tips & Tricks - BSR Matrix Contact TOPCAD HUDY
Переглядів 4808 місяців тому
Nitro Touring Car Racing - Foam Tire Turning - 101 Tips & Tricks - BSR Matrix Contact TOPCAD HUDY
HPI Nitro RS4 2 - Carbon Fiber HPI T3.0 Engine Build Montage w/ Tuned pipe - What Inspires You?
Переглядів 2758 місяців тому
HPI Nitro RS4 2 - Carbon Fiber HPI T3.0 Engine Build Montage w/ Tuned pipe - What Inspires You?
Carbon Fiber Nitro RS4 2 - POV Adventure - Ends in Crash - Insta360 Go3
Переглядів 6699 місяців тому
Carbon Fiber Nitro RS4 2 - POV Adventure - Ends in Crash - Insta360 Go3
STS 853 12R T5 - Modified Team Edition - Nitro Engine Overview
Переглядів 9889 місяців тому
STS 853 12R T5 - Modified Team Edition - Nitro Engine Overview
HPI Nitro RS4 2 - Carbon Fiber Overview -T3.0 Engine
Переглядів 1,3 тис.9 місяців тому
HPI Nitro RS4 2 - Carbon Fiber Overview -T3.0 Engine
Dynamite Mach15 - Nitro Engine Overview - Crazy Nut Racing
Переглядів 6529 місяців тому
Dynamite Mach15 - Nitro Engine Overview - Crazy Nut Racing
Novarossi M12R ReR3 - Nitro Race Engine Overview - Mugen Seiki
Переглядів 61710 місяців тому
Novarossi M12R ReR3 - Nitro Race Engine Overview - Mugen Seiki
HPI Nitro RS4 2 POV - MIP Suspension Tweak Station - OS 15CVR Engine
Переглядів 45510 місяців тому
HPI Nitro RS4 2 POV - MIP Suspension Tweak Station - OS 15CVR Engine
What are you running for battery pack in the r40
@@BoostedRC Hey BoostedRC 💯 I still prefer to run NiMH so, I’m using a 5cell aaa micro hump pack. They work perfect for the R40 and other build. Generally, they are lighter than most Lipos in their size range. There is a custom pack maker in the UK that I normally order them from - This R40 is a Hara edition so the install location is in a little different location than stock. What type of small packs do you currently use? - I appreciate you taking the time to write and for watchn’🩷
I picked up an r40 recently. Had an old marathon 1600 in it but shaped a little differently. 5cell.
@@BoostedRC Do you have the original lower chassis where the battery goes in the middle (from underneath)?
Hola. Te saludos desde chile. Muchas gracias por tus videos. Y la vez preguntarte por una caja negra que va adelante en tus autos. ¿Para que es?.saludos.
Hi and thank you for watching. The black box is the GNSS/GPS (Speed reading device). It allows you to monitor the speed, acceleration and more of the car. I hope that helps a bit. Do you run touring cars as well? I appreciate you taking the time to Hi 💜 Hola y gracias por mirar. El cuadro negro es el GNSS/GPS (dispositivo de lectura de velocidad). Te permite monitorear la velocidad, aceleración y más del auto. Espero que eso ayude un poco. ¿Conduces también turismos? Aprecio que te hayas tomado el tiempo para saludar. 💜
Nitro is coming back in a big way.
@@AllInRc1971 Feels that way/Hope that’s the case. The more we all do, hopefully the market sees it and responds with new platforms, engines, etc. - The magazine market needs to respond as well. RC Car Action needs to promote like they did in the early 2000’s I appreciate you taking the time to comment and for watchn’ AllInRc 🩷
@@a2rc Dimitri at Nitro Gang has been killing lately. My addiction started with an after buy for $50. And RS4 roller with a motor. Three months later 11 RS4s and two TC3s.
@@AllInRc1971 That’s amazing‼️ It’s to fall in love with these touring cars (as you have found out) - Are you working in a project car right now? Would love I hear about it
Sorry I been so busy. That's a awesome little car u have did a great job with it! 60mph That's fast. Not had any time to mess with any of mine! Lol to busy working on other people's
@@tedspurgeon6658 I very much understand the being too busy lately lol. No matter what, I appreciate you watchn’ Ted - Yeah 60Mph isn’t too bad. I’m working on getting it back out for round 2. Making a few changes. Time will tell… What’s been one of the best customer cars/trucks that you worked on lately ⁉️
@@a2rc traxxas t-max in the nitro. Electric rock crawler they seen to be the big thing now my brother does the all the work on them. I nitro only lol
@@tedspurgeon6658 Well, I’m glad I only chat with you lol. Just kidding, your brother must be really big into the hobby too. Its awesome we have so many people that love the hobby
@a2rc guess what ment to say I fix t-maxs the most at the shop lol it not the coolest rc I have worked on lately. I'm working on a losi lst-2 for a guy. it pretty sweet. Wish I could share pictures with u!
Hey youre right about these engines definitely clean them up first before running. I had one it blew through 5 plugs because of shavings and I had no idea what was going on. Eventually realised shavings was destroying the plugs and cleaned the e engine and worked great since. Some reason their QC on the HO isn’t good must come from a different manufacturing facility with lower standards haha
@@Thatbodytech It’s sad to hear that others have been seeing the same issues from the factory. I’m glad you figured out your issue and was able to fix it though 💯 - Like everything, we just need to have a little patience and we can keep these engines running healthy for a long time. What car truck do you have the HO installed on? I really appreciate you taking the time to write and for watchn’ 🩷
@@a2rcsubed and liked most videos already got to keep nitro strong in the world. It was in my rs4-3.
@@Thatbodytech That’s a nice big engine for the RS4 3! Nice work - I appreciate the support and agree, The Nitro portion of the hobby is so much fun. We all have to work together to keep it going 🩷
This is awsome. 60mph! Thats much faster than my tlr buggy with a long gear ratio and a picco 28, 49mph if i remember well.
@@TastyBRC It’s a screamn’ little .12 (2.11cc) engine for sure. - I’m going to make a few changes and see if we can’t squeeze out a couple more MPH. Time will tell … - Anything around 50mph and faster, is going pretty darn fast. I bet your Picco sounds great! I appreciate you always watchn’ and taking the time with say Hi 🩷
Great video and awesome engine sound! Have you tried running this engine with 16% nitro? Would it be a dramatic difference in the performance compared to 25%? Have you installed some extra shims to have this engine running so clean with this fuel? Thanks for sharing this amazing footage!
@@lyubennyagulov9012 I have ran the engine with 20 and 25% but not 16% so I’m not sure about that - I would have to measure the shim stack again to tell you for sure but, I think I’m running .3mm. Depending on shimming, the nitro % does affect power to a degree but, there is a working range. Shim stack-up with Nitro % changes could be a future vid topic 💯 - I’m glad you enjoyed the vid and thank you for taking the time to write 🩷
Get rid of those foam tires and get some belted rubber tires 😮😅
@@richardbrown6762 Hey Richard. Thanks for Watchn’ 🩷 Rubber tires maybe an ok option for the parking lot (Depending) but, for the longer runs, foams are definitely the way to go. - Having shore, width options and turning the foams to the diameter I want, is pretty important. In saying that, these were pre-use foams and had a little smaller dia. I bet I could have gotten another mph or so out of the car with a fresh pair. Well maybe next time 😋 Everyone has their experiences and preferences for sure. I have learn over the many years that for my suspension set-ups and majority of places I run, foams are king (I have tried a lot of different things over the years). Rubber may work better where you run 🤷🏻♂️ so, I’m defiantly not discounting your exp Thanks for taking the time to write and have a great day 💯
Awesome rig brother love the sound. That little thing screams😍🔥👊
@@TheNitroAddiction She got the Getty Up and Go 😂. It’s pretty amazing the amount of power a .12 can have - I’m glad you enjoyed it and I appreciate you letting me know 🩷 Thanks for watchn’ Addiction
@@a2rc yes sir thanks for the great footage 👍
Another great vid from the nitro maestro!!! Yes nitro is all about trial and error!!!
Same here bro those centax are for racing, not bashing or speed run. It's a great video like always keeping it braapalicious it's a speed demon
@@Robrismo-rc I appreciate you Rob and I’m glad you liked the Speed run Vid 🩷 - It was a fun day for sure 💯 I can’t wait to see some more of your Touring collection on the road ‼️
20:12 Nitro on fresh asphalt. This is RC heaven.
@@n00b247 LoL 100% 😆 - I appreciate you taking the time to say Hi, for watchn’ and the continued support 🩷
Very nice! Happy to see this run…been patiently waiting for this one! Curious, what top speed do you think is possible if it was built for speed runs and what changes might be necessary for a speed run build?
@@tegamckinney Hey Tega‼️ I really glad you enjoyed the vid and I always appreciate the support 🩷 Some different/custom drivetrain components would be needed for sure. - The R40 is a solid platform to build a formal speed run car but it is also heavy. There is always going to be trade offs to which chassis you choose. In additional what engine you choose. .12s can have a lot of RPM but, at times do not have enough displacement to power through to higher speeds. Counter to that, larger displacement engines may have the torque but may not get the rpm you need to be really fast. It’s all a balancing act between gearing, rolling resistance, power, aero, etc - On of my many personal goals for my speed formal speed run car is to only use a small block. Anything over 3.0/.18 is a not consider a small block. Somewhere in the future, I’ll discuss my formal speed run car and what I have been able to do/not do. - It takes a lot of work to get over 65+ on a 1/10 touring car with a small block. My personal speed goal would be to get to 100+ but a lot goes into it (one step at a time). Simply finding a location to support the speed is one thing lol let alone build the car to support it. The whole process is a fun challenge to work toward
Nice on road nitro 🎬 ..would love to a on road top speed challenge ..great video bro
@@allaspectsrc4178 Thanks AllAspects 💯 I’m glad you enjoyed the vid An on road speed challenge would be interesting but, would need some formal rules to be made. - Speeds over 65+mph mark with a small block and 1/10 touring car is challenging but, also fun to try. Each additional 10mph is a big accomplished. I have a lot of personal rules/challenges for myself to adhere to. I’m still working toward them and enjoying the process. I’ll chat about all of that at some point in the future. I’m looking forward to seeing some more vids on your Integra touring cars ‼️ - I appreciate you watchn’🩷
Very cool. I just got into RS4s a few months ago. Now I have 9 of them. Lots of fun, but kind of hard to get parts for. I keep buying parts cars and can't part them. I swear by the Flysky GT5s for range and the all important gyro.
@@AllInRc1971 That’s awesome you have fallen in love with the RS4s. That is an easy thing to do lol - I agree, parts can harder to get at time but, well worth it. Grab them when you can. I appreciate you taking the time to write and for watchn’ 🩷
Simply beautiful,the body is also awesome,remembers me on a proline closed Lola Body which I ran back in days on my V-one RR on that time on the gp pro class .I still remember that it has produced more downforce in comparison to the opened Lola 😅 You should consider to get for such applications a Radio with more range ,like as instance the HOTT Surface Transmitters which are able to be paired with their full range Receivers like the GR12 or for extreme applications GR 16 with the diversity system.I use HOTT for my boats 😉 To be precise ,the X8-E transmitter,but unfortunately they aren’t at the moment available,only the more basic version X8-N,anyway,the range is the same
@@voneboy I glad you enjoyed it and thanks for the comments on the body 💯 I’ll have to look into the “HOTT” system you’re talking about. - A number of my cars and trucks need to be updated with newer radio systems but, some already have been. It just takes time as you know. Lots of different projects going on. All of them fun - I really appreciate you taking the time to say Hi and as always, I appreciate you watchn’🩷
@@a2rc Yeah,the body really brought me some very nice memories,wish I could show you a picture of mine rr evo with the body ,I’m sure that you would also like it like I did👍 If you need further informations about the HOTT system,just let me know,I’m always happy to help out nice people who are so passionately on nitros like I am bro👍
I've been waiting for this
@@Nitro_rc_life I hope you enjoy it and Thank you for Watchn’ 🩷
Very nice. I never have ever seen one up close and that nice. Great collection. You are a great positive inspiration . When I get not interested in the hobby are frustrated . Your attitude and vids give me the inspiration to keep going. Great stuff.
@@CrazyDadNitro-2.0 I glad I can help in a small way. It’s always nice to know folks are enjoying the vids 🩷
Great run 👍 Your videos are making me feel the need to get the 4-tec going 😁👍
@@michaelgraham2943 😮 Ohhh can’t wait to see her up and running Michael 💯. You keeping the stock engine or what’s the plans for it? - I appreciate you taking the time to write and for watchn’🩷
@@a2rc it's the 3.3 model but I'm going to put a 2.5 in it. I'd rather have good handling instead of max speed . Your R40 looks like it handles surprisingly well 👍 for a 1/10 scale.
@@michaelgraham2943 Yep, I love the 1/10 Touring class for cars. This R40 only has a 2.11cc Engine (The 12TZ would be considered the top of the line “club race” engine - right before the formal race “OS Speed” line) - I total get you putting the 2.5 in the 4Tec. I know it’s not the exact same engine but, I personably think the OS 15CV-R has a great balance of power for the a 1/10 chassis. Yes, we can have and I do have other RS4s with bigger displacement engines but, some seem to have more power than needed (if that makes sense). No matter what engine you have, they are always fun and easy to fall in love with 🩷
Wooo. Therapy in a great educational awesome understanding way! Great channel great adding you rock and finally for once I’m only 25 to 30 minutes behind!👍always . I enjoyed . Thank you 👍🏆
@@CrazyDadNitro-2.0 I’m happy You’re happy CrazyDad 💯 - As always, Thanks for all the positive comments and for watchn’ 🩷
Sale
@@ALIBABU7552 Thanks for Watchn’ 🩷
Sale
Woooo. Nice. Looking forward to some action .👍always. Thank you for sharing . 🏆👍🇺🇸🫡
@@CrazyDadNitro-2.0 Thanks 💯 - Do you happen to have any touring cars in the collection⁉️ Thanks for Watchn’ 🩷
Thanks for sharing 👍 Just got my first road car been waiting for the speed challenge to end so i can get to working on it.
I'm not sure how I missed this comment but, I can't wait to see the 4Tec up and running! I apprecite you checking out the channels humble beginning video. It's great that so many can share these Adventures with me. Thanks for watchn'
Wow beautiful body great job 👍
Wow, thank you Michael!
Nice comparison 👍 sad to see the quality control is not what it used to be.
@@michaelgraham2943 Agree, it could be much better - Thanks for taking the time to write and for watchn’ 🩷
Cool 👍
Awesome car 😁👍
@@michaelgraham2943 Thanks Michael 💯 Do you happen to have a R40 or something similar?
@@a2rc I wish I just picked up a real nice 4-tec going to start working on it soon 😁👍
@@michaelgraham2943 Well…. That’s pretty awesome too 💯 - Keep me updated on how it goes
👌
@@rawrc Thanks for Watchn’ Raw🩷
Don't let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry's and bought three t66 turbos with nos, and a motec exhaust system.
@@chinofinelli Tuna on white. No crust, right?
@@a2rcwhat, are you sandwich crazy?
@@chinofinelli LoL. Thanks for Watchn’ 🩷
Yeehaww totally sickening A2RC can't wait for the full video!!!!
Aye man I found a very clean rs4 don’t know what type. I want to go pick it up just kinda scared on messing something because parts on this are kinda prices and I want to know if it was hard to find these parts? Very tempted to
@@alexistorres8825 Hey thanks for Watchn’ and taking the time to write 🩷 It can be difficult to find parts at times and these awesome vintage cars do fall into the “pay to play” environment but, they are 100% worth it ‼️ - If you have an opportunity to pick up a whole car that’s in good shape for a good price then, I would jump on it. The cost you save on the whole car will help you when you need parts or want to upgrade certain hop-ups. A lot of folks just keep an eye out and grab something when it becomes available. Do it a little at a time so it doesn’t become or feel like a burden The belted RS4 is still one of the best 1/10 RTR/Club race touring cars. I fell in love with them 25+ years ago and I’m still building and running them today. - Keep me updated if you decided to start your own adventure with one. Would love to hear about it 💯
Always check even when new
@@Robrismo-rc 100%
Great video like always 👏👏
@@Robrismo-rc I’m glad you enjoyed it Rob‼️ As always, I appreciate you and everyone for taking the time to write and to watch 🩷
I have a rs4 1/10 scale and a super ten I built for scratch and both have a 2 speed transmission and I found out that ofna had clutch bells that worked on the hpi 20 years ago 😮😎👍
@@richardbrown6762 Hey Richard 💯 Thanks for the great comment - Yep you’re right, for example, the OFNA Z10 used some very similar components. It wasn’t a direct clone but, for sure was similar. There are two main OFNA 2 speed transmission versions that can still be used with the RS4 family of cars Do you still drive your RS4? Thanks for taking the time to write and for watchn’ 🩷
@@a2rc yes I have both of them all they need is servos and wd 40 to unfreeze the motors one has a oscvr 15 and the other has oscvr 18 you know witch one has what lol both are 50mph cars 😎👍
Shelf queens lol but still in good condition for some parking lot war 😆😆👍
❤❤😂🎉😢😮😅😊. ไฟแอดพ์. ?
Thanks for watchn' 💜
Therapy time. Late but I made it. Wooo. Enjoyed the video. Thank you for sharing
@@CrazyDadNitro-2.0 I’m glad you enjoyed it 💯 - Do you happen to have a “HO”? I always appreciate you and so many taking the time to write 🩷
@@a2rc I do not own a nitro HO. I have had 8 fox body stangs with the 5.0 HO😂😎. Thank you for the nice educational and nice videos. Thank you for sharing all your rare and nice stuff. Thank you for the kind words
Hands down great editing . Love it
@@CrazyDadNitro-2.0 I appreciate that CrazyDad. It does take some time to put together but, they are fun. - Thanks for saying Hi and for Watchn’ 🩷 I have to catch up on vids myself
Nice
I have pretty much the same build. I'm having trouble finding a flywheel. What flywheel did you use?
@@JoeMyers-b7l Hey Joe‼️ That’s awesome you have a similar build - The one on this particular build is a HPI flywheel (A801) Let me know how your build goes and thanks for watchn’ 🩷
@a2rc thanks for responding dude! I actually took an educated guess and that's the one I ordered lol! I have 2 rs4 2 one is mostly stock with a 2 speed and exhaust and the other is built pretty much like yours you have there. Awesome rig you got there man!
Hi what kind of clutch shoes are using and are they still available Thanks
@@tonycatalfamo9706 Hi Tony and thanks for the great question 💯 - I mentioned the clutches around the 11:08 mark in the video. I prefer to use either the HPI A885 or HPI 87191 clutch sets. At times you can find them new and used on eBay (normal is a good place to start looking) Are you working on a belted RS4 right now? Would love to hear about it - I hope what I mentioned helps and bit. Thanks for taking the time to write and for watchn’ 🩷
Good morning thanks for the part numbers I'm working on rs42