Відео

really easy to follow thank you!

I have 1.3.3.6 firmware...tried reset..another fw but dont work only sometime...tried push connector like u all cables..4 sensors...and main cable in board bed and also in mainboard didkt fixed ..wait for new replacements..lol...so like 2-3 weeks wait omf

i heat bed to 110 temp for few min then it fixed..for few days..but now everyprint this error..so i need heat bed 100 then work.if not reset printer and work...idk..new sensors and pcboard(under bed) they will send me so hope will fix it.....

Sold. you helping fix the orbit settings and the zoom. You have changed my life. I submit to your religion, where's the kool-aid. Take me to Van Halen or whatever.

I ended up getting a K1C from the same seller basically brand new, watching your video made me take the leap and do it, definitely made the right choice

Thank you for this. Do you have to take into account the thickness of the string into account when using this?

Perfect tutorial. I'm a Fusion 360 beginner and I followed it perfectly.

Great knobs

Personally I think it is best for any newbie to learn FreeCAD. Yes it is t as powerful, but is getting more and more polished and nobody is going to pull the rug from under you taking away a free version.

Is it possible to do all this in Fusion?

pretty awesome, nicely done

Thank you for the amazing videos-you're saving me every time! 😊 Is there a way to configure the fan so it stays off when not printing, runs at 20% for the first 1.5 hours of printing, and then switches to 100% after 1.5 hours? The noise in standby is a bit much. Thanks in advance! 🙏

What app are you using on your phone to control klipper

On every video for the sovol i see so many comments "trying to fix this" did you have this issue?? Blah blah. Glad ive done some research. Ill get something else

I use uv resin to make jewellery, if it's still tacky after 20mins, get a better brand. Spend the money, it's def worth it.

Nice little project. I've lost count of how many of these little kits I have. Maybe a dozen. I picked some up dirt cheap and got a bunch as gifts. The problem I have is that I don't need them. Over the close to half century I have been modeling and doing my hobbies I have found I only ever use #11 blades and a basic pencil type handle. Perhaps it is because I picked up 10,000 (yes, 10 THOUSAND) blades from tower hobbies back in the early 90's when they had 1000 packs on for $9.99 and I just got used to them but I have a bunch of others that I literally never use and likely never will.

Nice. I wonder how much filament it would use if you didnt hollow out the back. Sometimes less surface area more solid volume takes less filament and less time to print. 🤷

Another nice project! I very much appreciate that you use the metric system!

◽STL - www.printables.com/model/1119999 or - www.thingiverse.com/thing:6886790 Merry Christmas, everyone!

One of the anycubic kobra 2 printers I have I got as a customer return for $112 (CAD) shipped to my door. Even if it never worked it was worth it just for parts. it even had the original communications from the owner and support printed off and in the box. the guy's name was Tim and I am 99% certain I stumbled upon his post on reddit about this printer. It was an ongoing issue out of the box with the bed leveling not working. Support suggested things and he tried and after a week nothing got fixed. I had it solved within 10 minutes after I had it all together. it was nothing more than the inductive probe was installed a few mm too high. That was it. I adjusted it and ran the calibration process and it has been perfect ever since. When I posted this on Tim's thread I had a whole bunch of people flaming me saying that they shouldn't even have to do that, which is kind of correct...kind of. There is no way to know what may or may not have happened during shipping and if people were a touch more patient and willing to actually investigate problems I suspect they wouldn't have so many problems. So, is it worth it (to me) to drop $700+ on a new printer simply because I was too lazy to dig a little deeper to figure out was was going on with the one I already have? Not to me it isn't. I can buy a huge amount of filament for the difference. The really funny part to me was that Tim also bought an X1C as a replacement and in his posts he mentioned about how the lidar didn't work right and the Z offset was really finicky causing failed prints leaving him to have to adjust it all the time. He seemed ok with this though which seemed uber hypocritical.

I would try using a Stainless Steel Fine Mesh Colander. would let air in all directions and easier to use then a sock.

◽Wowstick - amzn.to/4f5ql9n ◽STL - www.printables.com/model/1101755 or - www.thingiverse.com/thing:6863235

Looks good. 8 hours is a long time, but then you had a lot of desiccant to dry out. I was using a cheap foil pan in our toaster oven, but I recently decided that maybe that was not the best idea. So, i bought one of those cheap food warmers that supposedly gets up to 275 degrees F. I used a Fluke thermal meter to try and verify that, but I had set it on 212 degrees and it was only measuring 130 degrees F. Still it worked great for drying out the desicccant, but I did not have the amount that you were trying to dry. I only dry a little bit at a time. I did take around 3 or 4 hours though.

My K1 max came with a broken door as well. I opted for a 3rd party acrylic replacement. I did print the same hinges that you settled on, but haven't installed them yet. Overall I am happy with my max and K1C printers.

This error caused quite the headache. I looked around and couldn't find any solution to this, so I decided to investigate on my own. Doing this worked for me, and hopefully it works for some of you facing this error too!

I love the door hinges. Did you design them?

Thanks for yout trial. I have my silicar in nylon vegetable bags. It's easy to mothe them from storage to dehydrator and helps them dry faster 🙂 Is your dehidrator equiped with a fan ?

Unique yet accurate intro 😅 sucks about the door. Could always get a Lexan sheet from home depo and cut out a new one if you chose to keep it.

Over 2 decades bidding on ebay and I've learned the best thing is to find your max total cost, subtract shipping and taxes and what's left is your bid...to the cent. I enter the bid 4 seconds before the auction ends. I'm about 98% successful doing this. The key is that once you put in your bid you do NOT enter another. All you're doing is telling other bidders you want it or you are trying to drive up the price. I got a brand new, in box kywoo3d tycoon for $122 CAD all in, shipped to my door. Parts alone are worth double to me. Brand new kobra 2 for $149. You just have to be willing to wait.

0:48 why can't I find this 😭 also, link to the visualizer website?

Why did you mix the cotton in with the thermal grease?

The winner was awarded by those who have no idea of ​​a balanced sound compared to a high-pitched and disembodied sound, plus it does not take into account the rigidity of the yellow plastic..

i purchased a Creality K1 SE 2024 and ended up having "Leveling sensor chip abnormality, sensor damage or environmental impact" so I returned it because it failed after 7 prints. Bought another one and a month later same issue so I returned it. Ended up buying a Bambu Lab and never had an issue again. I dont find Creality to be that great IMO. Yes im new to 3D printing but 2 printers failing for the same reason. I didnt do anything. it ran a bed level for each new print I did so I did not tinker with anything. Could it have been my fault? Possibly since im new to printing

Why would you even turn it on with all that glass everywhere almost as bad as the packaging 😂

Nice tutorial, however I really do not like this "traditional fusion" knurl design. I usually make my own custom diamond shape profile instead of just using triangle profile coil. This gives you an actual genuine knurl pattern and it's also more grippy.

I'd file a complaint with ebay and send it back for the broken door. Listing did not say it was broken, it was their poor packing that did that.

I don’t know how much a door cost for this printer. But I bought CR-6SE. They said that the Display screen would stuck when Booting up. I have plenty of Parts for this $150 new machine. I can’t to see what I run to myself. I think it’s either the display of the motherboard. We will see soon. Good luck on you project. 😮

Does the heat resistant tape cause any issue with heating the bed uniformly?

Thanks for the nice video. Do you have any Start/End G-Code upgrades too?

So many views but so few subsribers..

Tired of not remembering where I put my Boss Katana Go, or putting it somewhere in the way. So, I designed this to hang it. There are two versions available to print, one with the hole and one without. ◼STL - www.printables.com/model/1066726 or - www.thingiverse.com/thing:6824672 Everything I used in this video: ◼ UV Lamp - amzn.to/4fC8w2h ◼ Mica Powder - amzn.to/4fFUgpi ◼ UV Resin - amzn.to/3YY1kbv ◼ Mixing Cups - amzn.to/3YEhaXu ◼Wood Craft Sticks - amzn.to/4elx0vW ◼◼ My stuff! ◼◼ ___________________________________________ ◽CONTACT - Triumphinglosersbusiness@gmail.com ◽Printables - www.printables.com/@Avel ◽Thingiverse - www.thingiverse.com/3deth ◽PATREON! - www.patreon.com/AVEL ◼◼ A list of items I use. (Affiliate links) ◼◼ ___________________________________________ ◽Sovol Klipper Screen - tinyurl.com/bdz3htnz ◽Sovol SV06 - tinyurl.com/4rhp5rze ◽Sovol Website - tinyurl.com/jzf2e3hj ◽PCBWay - pcbway.com/g/xpXdUB ◽FixDry Dual Filament Dryer - amzn.to/4eOTfeN ◽FixDry Knob Filament Dryer - amzn.to/40dFe5U ◽Switches - amzn.to/4dYkToL ◽JST Cables - amzn.to/4fZVQ6t ◽COB LED's - amzn.to/3T9ya5Y ◽M3 Screws - amzn.to/4dVeVEU ◽LED Light - amzn.to/4744wVg ◽Magnets used - amzn.to/3MmiLv1 ◽Handheld Vac - amzn.to/3Mp13XQ ◽Fans used - amzn.to/3XiFPBl ◽UV lamp - amzn.to/3AI1wlo ◽Textured Bed - amzn.to/3X4Hr01 ◽Sony ZV-E10 - amzn.to/3XkvK6M ◽SILICA GEL BEADS - amzn.to/47kOmY1 As an Amazon Associate, I earn from qualifying purchases. It doesn't cost you more, but I do make some pocket change on the sale.

Thank you ! A like and a subscribe well deserved.

"Just got a new computer and could not for the life of me remember how to set up Cura for the Klipper screen. Came right here and you just saved me hours of searching. Thank you for the great info!! 🙌"

Is there a way to save organic shapes that you create? Or are you forced to recreate them each time?

great video, thank you

What does measuring the estep do? Just got my machine and need help

fun video i always wondered myself , you could print a mold and then make metal bits. cheers

Did you just use PLA?

Bit of a suggestion if you ever want to make a functional model, having the cutting edge of the flutes end closer to the centre of the drill bit will help it bite material. Atm when starting there is very little engagment with a cutting edge so it'll struggle a bit to actually bite the material. Sick model and clean print tho!