Chuck Carlley
Chuck Carlley
  • 29
  • 111 066
12V Accessory Outlet Mod. 2001 Tahoe Conversion to Ignition Switch Power.
This video details how to convert the "always on" 12vdc convenience outlets to "switched" power on a 2001 Tahoe/Suburban. This prevents accidental battery discharge when you forget to unplug a 12-volt accessory from the vehicle's convenience outlet. Disclaimer: I don't know if the electrical layout on any other Tahoe year is similar to 2001. If not, follow the CONCEPTS and PRINCIPLES presented here to achieve satisfactory results in your vehicle.
Переглядів: 477

Відео

SAFE Select Mystery HELP!!!
Переглядів 469Рік тому
It seems so SIMPLE! But for some reason I don't have the brainpower to figure out SAFE Select. I'm hoping someone can point out my error. #SAFE #SAFESelect #spektrum #spektrumrc #horizonhobby #AR636 #AS3X
Collimation of Celestron Skymaster 25X100 Binocs
Переглядів 15 тис.2 роки тому
This video shows the internal prism plate of the Celestron 25X100 Skymaster binoculars in order to understand collimation. Actual collimation is NOT shown in this video, only an exploration of the parts that ALLOW for collimation. Note: You'll notice that the right hand prism housing's vinyl covering has been removed. Most bins have collimation adjustment screws under that covering but these di...
O'Reilly 3/8" Torque Wrench Repair
Переглядів 28 тис.2 роки тому
A common problem of this type of torque wrench is that they don't "click" from the factory. This video shows the disassembly and rebuild to fix this problem.
Removing the Cover on a Bolt Halo AC/DC Power Bank
Переглядів 6 тис.2 роки тому
UPDATE: A non-destructive method to get the cover off can be found here: ua-cam.com/video/BrFclmRnH5I/v-deo.htmlsi=QvmQlzaWf8QRnjf5
Roy A Thon Best Wishes 2001
Переглядів 302 роки тому
Larry Stapleton filmed this tribute to the great Roy Sims during the Roy-A-Thon Boogie in 2001. Roy was landing after a jump at West Memphis Skydiving when a hot dog swooper took Roy's air and Roy hit hard with severe injury. Roy has since made a full recovery and we love him!
Fun at the Roy-A-Thon 2001
Переглядів 332 роки тому
Larry Stapleton video'd this 3-way with Barb Davis, Brian Dew (Sparky), and Chuck Carlley (me) at the Roy-A-Thon benefit boogie. The late Glenn Johnson is the pilot. Video'd at the Grace International Airport and Social Club in 2001.
Digital Television with Chuck Carlley
Переглядів 1892 роки тому
Launched in the Jackson/Monroe CableTV market in 2000, I was lucky enough to have a part in promoting our Digital Video Service.
Music Choice Commercial with Chuck Carlley
Переглядів 2,4 тис.2 роки тому
Music Choice was the BOMB when it first came out in 1996. I was proud to have been asked to promote it! This spot was for Capitol Cablevision in Jackson, MS.
Removing the filter seal in a 4L60e transmission
Переглядів 14 тис.2 роки тому
2001 Tahoe, 5.3L with 4L60e transmission. The trans filter seal is ALWAYS difficult to remove. This method makes the seal removal SO easy.
Kayaking the Ross Barnett Reservoir after Hurricane Ida.
Переглядів 1223 роки тому
Was looking for some big waves after Ida. These weren't them but they'll do.
Hellcat Maiden Flight - Blitz RC / Art-Tech
Переглядів 2254 роки тому
Maiden flight of the Blitz RC/Art-Tech F6F Hellcat belonging to my late friend Bobby White. Bobby passed away before he could fly this plane. In his honor, I waited until the windiest day EVER and somehow screwed up the CG so it flew like . . . well, you'll see. Shoulda stayed home with a good book.
Reversing a servo using the Spektrum App
Переглядів 1,9 тис.4 роки тому
Piece of cake to use the Spektrum app to configure everything about your Spektrum AR636 receiver!
Gas Bike
Переглядів 2324 роки тому
Small engine addition to a bicycle makes it a lot of fun.
Spektrum A330 Servo Disassembly
Переглядів 5685 років тому
Disassembly of a Spektrum A330 servo showing gears. RC aircraft. Left flap servo was chattering.
Hayward SP3200 coupling adapter
Переглядів 1,2 тис.6 років тому
Hayward SP3200 coupling adapter
First Attempt Using Harbor Freight Mini Tire Changer
Переглядів 8357 років тому
First Attempt Using Harbor Freight Mini Tire Changer
ETX125 Motor Drive Repair
Переглядів 39 тис.9 років тому
ETX125 Motor Drive Repair
CC Wingsuit 020715
Переглядів 539 років тому
CC Wingsuit 020715
Chuck's First Wingsuit Jump
Переглядів 6110 років тому
Chuck's First Wingsuit Jump
Blind Old Man's 7-way
Переглядів 4310 років тому
Blind Old Man's 7-way
GCS 2-16-14
Переглядів 910 років тому
GCS 2-16-14
Jin swoop
Переглядів 2811 років тому
Jin swoop
Hangin' with Ed
Переглядів 2911 років тому
Hangin' with Ed
Jumps with Ed and Jin
Переглядів 1311 років тому
Jumps with Ed and Jin
Jin, Ed, and Chuck on July 13, 2013
Переглядів 4011 років тому
Jin, Ed, and Chuck on July 13, 2013
Ed Landing on 071313
Переглядів 5711 років тому
Ed Landing on 071313
Ronnie and Ronnettes
Переглядів 12714 років тому
Ronnie and Ronnettes
Moss Point, MS - 2001
Переглядів 19814 років тому
Moss Point, MS - 2001

КОМЕНТАРІ

  • @pitstoppit9872
    @pitstoppit9872 5 днів тому

    My 03 Yukon Denali use to turn off but now it stays on most of the time and turns off sometimes by itself but I have an radar and sometimes I forget to unplug it so I'm wondering if theres a bad relay that is not turning it off and if it's in that box you added the jumper? Now mines has one socket on the front near the radio. another under it by the console, one inside the console cover, one behind for the passengers by the rear ac control and one in the back by the hatch passenger side panel and all stay on.

    • @ccarlley
      @ccarlley 4 дні тому

      My '01 did not have a relay controlling the acc 12v outlets. They were direct wired with a fuse. I suspect that your wiring design is similar to the video however. It sounds like you have a loose wiring connection BEFORE the under dash wiring box. Troubleshoot accordingly.

  • @ScottEvans-j6n
    @ScottEvans-j6n 5 днів тому

    Brilliant, A+++ Thank you, happy camper!

  • @randommechanical9950
    @randommechanical9950 28 днів тому

    Thanks man you saved my sanity tonight!

  • @sdelince
    @sdelince Місяць тому

    Chuck Carlley, saving lives and knuckles!!!

  • @charleshurley7255
    @charleshurley7255 Місяць тому

    Excellent! Thanks

  • @1898nc2
    @1898nc2 2 місяці тому

    Thank you so much man you saved my butt

  • @JohnSmith-mh5vi
    @JohnSmith-mh5vi 2 місяці тому

    Thanks for the tip

    • @JohnSmith-mh5vi
      @JohnSmith-mh5vi 2 місяці тому

      OK, I got it out, but how to get the new one forced in?

  • @uzig17
    @uzig17 3 місяці тому

    Really appreciate you taking the time to make this video. It helped me when my torque wrench stopped working. It had, like yours, twisted and therefore stopped clicking.

  • @alexanderclifton128
    @alexanderclifton128 3 місяці тому

    Music Choice is still around

  • @spriggiehensley3770
    @spriggiehensley3770 3 місяці тому

    Search AI Copilot and get the instructions for pins in the holes and 2 c-clamps holding the pins in all at once to remove the top.

  • @100reality2
    @100reality2 3 місяці тому

    I can't get the new seal in lol how do you get it in there properly? When I put it on the filter and push it in it just slides down and doesn't go in the bore?

    • @ccarlley
      @ccarlley 3 місяці тому

      Place the seal in the trans body bore and seat it in the bore using a 19mm socket until it feels "bottomed out". Lube the seal with ATF on your finger and then insert the filter neck.

    • @100reality2
      @100reality2 3 місяці тому

      @@ccarlley mate you are a legend I got the seal in thank you

  • @JonOffgrid
    @JonOffgrid 3 місяці тому

    This works it got our old one out

  • @jessramirez6696
    @jessramirez6696 3 місяці тому

    Show you a movie I used to work at the jawline tour runs. We made snap-on and Williams New Burtons your spring supposed to be greased where you're into the wrench sits on the pivot reset part and make sure your your screw is greased when you assemble it and get yourself a good calibration kit to calibrate it at 10 years experience in that company we need Williams we made some good torque wrenches. Have a good day. God bless. Amen

  • @BigDipper79
    @BigDipper79 4 місяці тому

    Is the inside diameter 1/2 inch? I would assume so?

    • @ccarlley
      @ccarlley 4 місяці тому

      Not sure. I doubt it. It's a 1/2" NPT pipe thread (tapered) which is .84" from the chart I see.

    • @BigDipper79
      @BigDipper79 3 місяці тому

      Thanks

  • @randyoliver6955
    @randyoliver6955 4 місяці тому

    I don't know how you came up with the 1/2" pipe trick. I tried it today and it worked flawlessly. Thanks

  • @amookaroo
    @amookaroo 4 місяці тому

    thank you man , i had exact same problem , you solved my problem

  • @ryno6101
    @ryno6101 4 місяці тому

    Thanks for sharing this , works great😊😊

  • @jebidiahcarlyon3543
    @jebidiahcarlyon3543 5 місяців тому

    If you are having trouble hitting the pipe hard enough to pull out the seal, try setting something really heavy on one side of the "T". Then hit the other side with the hammer. Awesome trick, I really appreciate it.

  • @Tallhandsome77
    @Tallhandsome77 6 місяців тому

    The pin on mine was held on with a c clip.

  • @unracker100
    @unracker100 6 місяців тому

    Thank you sir, I’ve got to the clear plastic, was wanting to replace batteries but it doesn’t look good, I’m like you if I can’t fix it than it goes to the where the die.

  • @asedeyhot123
    @asedeyhot123 7 місяців тому

    I've been trying to open mine for over 5 months, scared of breaking anything.....the inverter port isn't working anymore and really need a fix ... Your video just raised my fear-o-meter to 98%

  • @NTromb
    @NTromb 7 місяців тому

    I would think that a person would want to use something more linear like a dumbbell weight or something so to give it a slide hammer effect and preferably use a steel dumbbell weight as the plastic ones will just break apart but I’m sure anybody would know that

  • @grantfryer407
    @grantfryer407 7 місяців тому

    they shouldn't be out.. they should be spot on when you first buy them.. shouldn't they?

    • @ccarlley
      @ccarlley 7 місяців тому

      Yes they should! However, I've had them for years and I don't know if they got outta whack over time or if a slight bump knocked them out.

  • @NTromb
    @NTromb 7 місяців тому

    So silly question is this half inch rigid conduit or is this half inch gas pipe or half inch schedule 80 or half inch schedule 40

    • @ccarlley
      @ccarlley 7 місяців тому

      Good question! I used galvanized but considering it's 1/2" NPT thread, I guess any of the ones you mentioned could work.

    • @NTromb
      @NTromb 7 місяців тому

      This is true. I guess the next question is how long of a length of that pipe probably a foot would work

  • @AndyH-13
    @AndyH-13 7 місяців тому

    Thank you, your video was really helpful. Mine is all back together now and clicking.

  • @eddielozano3419
    @eddielozano3419 7 місяців тому

    Thanks sir for the video you share really help me out, just did it and it work great👍 just need to put the new seal in on a 2008 Silverado hopefully i dont damage the seal

  • @rhollyday
    @rhollyday 7 місяців тому

    Very clever and elegant invention! I will try it on my 6L45

  • @kagaos
    @kagaos 8 місяців тому

    Wow what a simple but elegant solution! It worked flawlessly I can't believe I've never heard of this trick before!

  • @andersonsantos8990
    @andersonsantos8990 8 місяців тому

    Goood! 👍

  • @RickySlatton
    @RickySlatton 8 місяців тому

    Can you put the new seal in the freezer to shrink it before putting it in the transmission?

    • @ccarlley
      @ccarlley 8 місяців тому

      Hmmm. Never thought about it but I bet you could.

    • @RickySlatton
      @RickySlatton 8 місяців тому

      @@ccarlley We will find out this weekend. Will let you know how it goes.

    • @NTromb
      @NTromb 7 місяців тому

      @@RickySlatton So what is the verdict?

    • @RickySlatton
      @RickySlatton 7 місяців тому

      @@NTromb It worked. Shrunk it enough and barely had to tap it in.

  • @steveslostad366
    @steveslostad366 8 місяців тому

    Vine won't charge either. What a dismal device. Tried 12-volt. Didn't work. Mine does not have the four little holes

  • @vegir41
    @vegir41 8 місяців тому

    Dude incredible,this has been a pain in the butt,im so close only to be stopped by this,and i don't have an extra vehicle to go buy this stuff Ridiculous,But i will definitely share this.👍Add to this a1"-or 1"1/4 coupling and you have a slide hammer.

  • @richarddodds9326
    @richarddodds9326 8 місяців тому

    I got one just like that and I gave a friend a good one got the junk and it is very good

  • @fuckamundo
    @fuckamundo 8 місяців тому

    Bravo. You have made my day.

  • @user-uq6vh3ps7m
    @user-uq6vh3ps7m 9 місяців тому

    3/4inch pipe will not thread it 1/2 is too small wtf??

    • @ccarlley
      @ccarlley 9 місяців тому

      Interesting. What year is your vehicle?

    • @user-uq6vh3ps7m
      @user-uq6vh3ps7m 9 місяців тому

      @@ccarlley 96

    • @ccarlley
      @ccarlley 9 місяців тому

      @@user-uq6vh3ps7mGood to know. Apparently the 4L60e had a design change around '99. Mine is a 2001. If it's not been damaged from your attempts, leave it in the trans. It's the filter that's important.

  • @richardmorales9400
    @richardmorales9400 9 місяців тому

    Very good idea I know it would’ve worked if I wouldn’t of taken off the rubber seal but I ended up using a Ellen wrench pry in side ways and it came right out

  • @JamieLong-g4h
    @JamieLong-g4h 9 місяців тому

    Thank You!!! It worked perfectly!

  • @MrOner07
    @MrOner07 9 місяців тому

    thanks for this video chuck. it really helped me. video and instructions were clear and useful 👍🏻

  • @peitung2558
    @peitung2558 9 місяців тому

    very helpful! I just met same problems!

  • @ryan6391
    @ryan6391 9 місяців тому

    BATTERY SWELLING? I get the one charge light without it charging any more. I don't have the cig charger to see if it is the cord. BUT i do see small stress cracks in the underside of the Case and notice it will not sit on the 4 corner supports on the bottom, so it looks like the battery has swelled. I'm guessing its a bad battery. Any one else have a battery swelling issue? Going to email them to see if I can get any replacement.

  • @ptgmonk647
    @ptgmonk647 10 місяців тому

    Genius idea! Thanks man!!

  • @somos1connection517
    @somos1connection517 10 місяців тому

    Love it!❤❤❤❤

  • @darrenmarceau2155
    @darrenmarceau2155 10 місяців тому

    Appreciate the time and effort you put into this video. It gave me some guidance on how to fix my telescope. I must disagree with you on the grease being the issue that caused the mounts to break. While it was most definitely a contributing factor, the root cause was poor engineering and design. I thank you again for all you did as it is helping me to repair mine.

    • @ccarlley
      @ccarlley 10 місяців тому

      I agree it should have been a much beefier drive system! Thanks for watching and sharing.

  • @화이트초콜릿모카-g5s
    @화이트초콜릿모카-g5s 10 місяців тому

    good video!!!

  • @modquad18
    @modquad18 Рік тому

    Ha, I’m doing this for the first time and had the same idea about threading something into the seal - thanks for saving me the time searching for just the right size threaded object!

  • @pietervanaarleify
    @pietervanaarleify Рік тому

    Thank you for making this video.

  • @speedfreak1161
    @speedfreak1161 Рік тому

    Lol , love it i do the same thing easy as pie 👍. Once you change it once you really don't need to change it all the time as long as the filter is tight on the seal its good , once the filter during a service comes off relatively easy the seal needs to be replaced.

    • @adamxenon829
      @adamxenon829 10 місяців тому

      The seal must be changed if you are putting on a new filter. Every time. With no exceptions. Or else the new filter will eventually dislodge and poor suction into the transmission which will cause many symptoms and premature failure

  • @joecrump5354
    @joecrump5354 Рік тому

    Thanks for this video, buddy. It worked like a charm. Absolutely no contact with the bore, so there was zero scoring or scratching. Saved me a lot of grief. Cheers

  • @rickynix2306
    @rickynix2306 Рік тому

    Would you mind sharing the link to App you are using? Thank you.

    • @ccarlley
      @ccarlley Рік тому

      Sure! It's called Spektrum AS3X Programmer. I'm using ios so not sure if it's got an Android version

    • @rickynix2306
      @rickynix2306 Рік тому

      @@ccarlley Very much appreciated. Thank you!

  • @DABELUK
    @DABELUK Рік тому

    Doesn't it have zoom? I just need to be moving the eyepieces?

    • @ccarlley
      @ccarlley Рік тому

      No zoom on these. Only individual diopter adjustments