Відео

Whenever I turn on my z906, it's turning off. Sometimes it Waits till I start a movie or any audio track, then on it turns off immediately. What could be the problem?

I miss mine! I would love to have a Logitech M510 with iFeel feedback.

This was actually a really neat video.

i know this is 4 years later lol but what do the symbols mean im trying to get this set up after giving up on it like 4ish years ago because it didnt work back then but now its my only option and i was wondering what the symbols mean to know if im getting all this right or if its still f'ed up because it would never sync with the xbox back when i first got it.

you remember power connector voltages 1-2-3-4-5-6 pin

My light dosent come on and idek if it’s charging what do I do

Does this mouse still work today with haptic feedback or atleast in the older games like Black and White

I have the same mouse but for some reason my disk said iTouch 2.15. Not sure why your disc says something different but maybe I had that one somewhere as well.

Does my Astro a50 need to be on while charging and do I just leave it on all night please let me know

It worked for me but only for a short time. The resistors R79 and R80 get very hot and the system then crackles in the speakers but continues to play music. What could that be? The 5.6ohm 3w 5% is installed. Bei mir hat es funktioniert aber nur kurz. Die Widerstände R79 und R80 werden bei mir sehr heiß und die Anlage knackt dann in den Lautsprechern aber spielt weiter Musik ab. Was könnte das sein? Es sind die 5,6ohm 3w 5% verbaut.

Thank you for this video!

Where can i get a d15 pin male for z906 pls. Its a new machine and my son broke some pins trying to plug in. I need a new male 15 pins replacement. Any help is welcome. Thank you

If anyone is watching this: Please use the desoldering pump to remove the old solder and don't push the new cap through it with force! 😅

what does the star on the charging station about mine just changed to a star from a headset sign

My system just has solid aux input 5 and 4 push the power unit shuts off and powers itself back on....also theres a clicking noise on the board.

😮

Hi, I bought this mouse years ago and thought I threw it away. But during an excavation expedition in my closet I found it and it still works. Do you know where I can find the FFB drivers and does it work under W10/11?

Finally, a solution!!!! Going to try it on my system, too, as I recently got this problem. I thought the system is done but it looks like it can be repaired fairly easy and cheap. Thanks a lot, man!!!!!

this is very helpful! do more of these

Hallo what is diode D-16 -parameter?

Logitech should eliminate this problem, I don't know why they haven't done it yet ... I don't have this equipment, but I'm going to buy it, I'm just intrigued by this problem because if I find such a batch with this defect, I won't enjoy listening to music, playing or watching movies in 5.1 ...

This is absolutely my problem, thank you so much, hopefully I can get a good engineer to fix my old one. Happily I got a warranty replacement. But I'm not throwing away a £300 system just because of 2 resistors!!

I loved this mouse. It's great to "feel" when you cross over windows. I wish they'd bring it back in an updated version

I just found this in my stash of old gear when I’m visiting an old house. Doesn’t work on my new MacBook Pro M1 Max 16 2021

i just bought this and my charging station wont even turn on. i plugged it into my xbox and my pc and nothing comes up

Bei mir funktionierte das zwar, aber nach kurzen freuen hat es dann geknackt und die anlage hatte dann keinen ton mehr. Die neu eingelöteten Widerstände sind kochend heiß geworden und haben sich verfärbt. Hat jemand eine Idee?

Holy crap, this entire time I thought the lights moving back and forth at the bottom meant it was charging. I looked at the astro command center app and my headset was still saying it’s 0%, but when I finally got the light to turn orange, it actually charged and now I see in the app it went up 1%… I just got these today so it sucks there are problems I have with it already. I had astro a20s and upgraded. If I end up not liking these due to the charging (I use my headset A LOT and I don’t have speakers for my monitor), I might just switch back to my a20s wireless usb which is WAY easier to use. Yes the a50s has a lot of nice settings and extra things you can do, but the charging stuff really makes it annoying.

Sorry, your links are dead. What's actually the replacement part we need to buy? I understand it's a resistor? But are there any specific?

the only headset i can wear for hours xD was so disapointed after my first pc360 broke.... and i tryd others .... ear hurt and the area around the ears ... etc... now i buyed a used one... now im happy again xD

Hi, i don't have the same issue as you. But if your surround system audio sounds like it's continuously pulsing regardless of audio input source, reset the onboard setting etc. what would you determine to be the mostly likely thing i need to check first when i remove the PCB from the housing?

This might have been one of my all time favorite mice.

Astro headset A50 is prob the best headset ive ever used but the charging sux. ill never buy one again.

Good afternoon friend, could you help me?. I would like to know, if you can tell me, what type or model of integrated circuit does the bass card come with, I need to change it, but I don't know what specific model to use. Thanks in advance for your reply

What's the power supply voltage outputs ?? i want to put this sub in a car :D

hi can you help me i have the same problem can you drop me a link for resistors or what resistors to buy to fix that problem ??

I have some turtle beach 700s that I’ve been using and was testing sound on my pc360s yesterday . I think the pc360s outperform the current 700s in quality sound but not volume.

hola alguien me puede ayudar con el valor de la resistencia redonda roja RV1 está quemada y no se aprecia el valor.gracias

I still have mine, I loved it in Half Life multiplayer.

Hey. I have the same problem. The 3 lights stay on. Or when it works, it just makes a popping sound and restarts, it is absolutely so annoying. I might try this out and if it works i will let you know

Had the 3 blinking lights issues, took it apart, zapped myself real good on heatsink on the power supply before I learnt to discharge those capacitors! Ordered 5.6ohm 3W resisitors on ebay and replaced R79 & R80 and fixed my speakers - ALL GOOD WORKING NOW - THANK YOU!

Hello, sir , subwoofer not responding please make a video to fix it. Speaker is fine but no response from it

can you write power pinout voltages please.

do the speakers still work?

Saben la referencia y donde puedo conseguir las bocinas internas? para reemplazar los de 2 satelites que suenan mal

Hello i have problem with mine they show me sometimes error cod 4 lights and 3 lights and they do popping in the past now it doesnt have any popping and they doesnt working have you some advice to me sorry for my bad english

Hi Please can you name the resistors for me to go and buy and change ?

FYI, the audio is terrible and you must get better audio. Video is pretty irrelevant as even grainy video is workable but when you can't hear the instructions it makes the video 100x worse. Fix the audio and the video should eventually follow. Audio in tutorials is crucial. I wish you lots of success on this channel! 👌😁

Just FYI an M.2 Heatsink and M.2 drive SHOULD be running at around 50-55 C as is NORMAL for this type of drive. M.2 are NOT platter drives that do better with cooling however this cooler will stop the temps from exceeding those numbers. Over the course of your M.2 drives lifespan having a heatsink will prevent data corruption on the surface of the drives. . Typically, it is the hot video card that makes the M.2 much much hotter as they are mounted almost under those beasts (typically but some have mount points for M.2 under the CPU on the inverse side of the Mobo, which is still FREAKING HOT! Duh manufacturers! Idiots!) on the motherboard so prevention of excessive heat over its lifetime is strictly recommended. I own 2TB and 4TB drives and I will not run them without a heatsink (I actually own this same one). Potential data corruption is a big deal over an M.2 entire lifespan and they NEVER tell you this crap when you buy one do they?

Inside each servo is a tiny belt these wear out and even break , they must be replaced . When you are trying to get a servo unstuck YOU MUST have power to Teddy and a tape in Teddy that only has TEDDY speaking and no one else is best . I open up the servo carefully and put a drop or two of silicone on the gears but NOT on the belt > put the servo back together and work the off white rubber roller back and forth You can feel the electricity start powering the servo eventually . Now I also know that the motor in the servo was greased with a special grease just for electric motors THAT must be what dries up over the years and makes the motor STICK. I myself have never taken the servo down to the motor . Maybe a little SILICONE creeps into the motor and helps it but I don't know . I have 31 TEDDY RUXPINS all are working ,I made them work . I also have many of the other WORLDS OF WONDER toys and if they had stuck servos THEY DON'T NOW ,They also work . REMEMBER the wires are old and the solder joints are also . BE GENTLE WITH THESE FABULOUS TOYS . My next project is to replace all the servos in my TEDDY RUXPIN STORE DISPLAY . The AIR SHIP WITH TEDDY AND GRUBBY . I wish everyone THE VERY BEST when working on these talking toys . SINCERELY MRS. M

I've had the same problem. Solved with u ! Thank you so much bro!