Відео

Good tip with the pinching.. thanks. I was scared to install this car seat. Silly me. 😊

So the seat isnt latched in with booster mode?

Am i fucking retarded i cant put the anchor through the seat without it getting tangled

كرسي قوي ويتغير مقاسه عندما يكبر الطفل سهل طيه جدا. كرسي سميك أنا سعيده ل شراءي هاذا الكرسي انه ممتاز جدا 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

I did get it tight (belt instead of latch, which was annoying) but the design of having to put the seat cover back on when installed is completely asinine and never should have made it to production. If the seat is tight enough, you can’t actually put the seat pad all the way back on. And storing the manual where it can’t be accessed during installation or when it’s installed? NOBODY thought this would be ridiculous? Thanks for the old, semi-relevant installation guide though.

This was a terrible terrible installation video. It's skipping many steps and it's not clear where the belt is going through

Thank you so much. I’m a grandma with my children. We didn’t have to have car seats if it had been for your video I would not have known how to put the car seat back together after I cleaned it thank you again so much. God bless you and stay safe.

How to install a high back booster seat without the harness

I have NINE kids and this is the worst seat I have EVER tried to secure. Its design is absolutely ridiculous. This is the hardest seat to secure properly. It's so hard to secure, there should be a safety recall. Look at the front seat in the video near the end...Even they couldnt make it fit right!!!! YOU CANT DRIVE WITH THE FRONT SEAT FOLDED!

Darn it….thanks, I couldn’t figure it out lol

Thank you!!

Worst car seat to install ever. I recommend a Graco instead!

Thank you for sharing with us i was so stress adjusting my daughters booster seat

What keeps top of seat in position if car is hit from front ? It will fly into the seat, slamming child face first !? Whiplash also ?

Yeah if it moves at all forward it comes COMPLETELY LOOSE. NOT SAFE AT ALL.

How do you tighten the straps?

How do you put the cupholder on???? Mine won’t click on

so where the cuphoalder go

So how do you loosen this pos? Good luck getting the kid out

Slow the heck down

Thank you!

The instructions are miss leading so don't feel bad. Don't even look at them. Google is your friend.

Ja. Tambien tuve que buscar un video de como doblarla. Nice chair by the way 😊

Please create videos for this model car seat on how to install the safety anchors or tethers at the top and at the bottom and how to properly store them in the back of car seat

Will you please include a video on this car seat model on the back that shows how to install the top tether and the lower tether and how to store them when not in use. Ty😃

Literally got one of these second hand and opened it and couldn’t figure out how to close it😆 UA-cam to the rescue!

Useless

So you’re telling me you don’t even use the seatbelt 🤦🏻‍♀️

Not good video I need help placing my grandson in car . But the pieces in the back r confusing

This is lies

Tips for anyone having problems with the lower seat anchors not tightening on one side. The anchor straps themselves are screwed to the car seat with a small strap. (stitched onto anchor straps then screwed to the back of seat on the other end.) When you are installing. Wrap anchor strap around into position from side of car seat closest to screw , down into under position as far as you can. (Screw will be tapped closer to one side of seat) . When into position pull side of anchor straps with no tighten mechanism (just a hook at end of strap) and latch onto your vehicle anchor farthest from the tapped in screw. You should have no issue reaching to car anchor this way. From there you will have all the slack you need to be able to attach adjustable hook into other anchor. Make sure anchor belt is flat across car seat. If done this way when you pull strap of adjustable mechanism it will tighten on both sides of anchors. Push down on car seat and pull mechanism strap to make anchors tight enough where seat won’t move left or right.

How about advice on how to install it in a 4 door sedan?

Fits perfectly rear-facing in our truck, which has a slightly smaller back seats. ua-cam.com/users/postUgkx6_FKRYB2ClSPRyjcd8HptiCS3EiQoNX4 Feels as comfy and plush as our Graco Contender carseat.

Fits perfectly rear-facing in our truck, which has a slightly smaller back seats. ua-cam.com/users/postUgkx6_FKRYB2ClSPRyjcd8HptiCS3EiQoNX4 Feels as comfy and plush as our Graco Contender carseat.

Fits perfectly rear-facing in our truck, which has a slightly smaller back seats. ua-cam.com/users/postUgkx6_FKRYB2ClSPRyjcd8HptiCS3EiQoNX4 Feels as comfy and plush as our Graco Contender carseat.

Fits perfectly rear-facing in our truck, which has a slightly smaller back seats. ua-cam.com/users/postUgkx6_FKRYB2ClSPRyjcd8HptiCS3EiQoNX4 Feels as comfy and plush as our Graco Contender carseat.

I was hesitant to purchase an open box carseat but it came in excellent condition and saved $35. Box was damaged as stated before I purchased it, but the ua-cam.com/users/postUgkxIxQe7nPH74g_xtI5NgiE9-zpGNkfgovw car seat looks brand new and I don't think it was ever used. I will update of course if I have any issues with this carseat but I don't think I will. Also it is surprisingly lightweight, the handle feels secure unlike my previous EvenFlo that was gifted to us. Love it !

Color: black and green | Size: 1 Count (Pack of 1) | Style: With Anti-Rebound Bar | Pattern Name: Car Seat

This carseat is trash. Poorly designed latch system only one side will tighten no matter what you do. This is.not a safe seat.

What tether. And to where? What a bad video

My car seat is moving a lot and this isn’t the car seat I purchased but the QR on the rear facing instructions brings up this video which is useless for me

How to replace the car seat pad of a safety first 2 and 1 grand?

That’s an old model, Is there a video of the new model, this video is 7 years old smh, Please post new video with new model.

This would be a good seat if the two fastening hooks actually tightened off each other. They are connected by stiching so only one side can be tightened. This is a really bad design that could easily be fixed if they two hooks could be tightened together. Otherwise the seat will always swing to one side. Would not trust this to save my kid in a car accident

Cannot get this to latch down rear facing. The seat is too top heavy and will teeter regardless because there's no support from the head down

I could not secure the seat with latch with anchor belt attached to the seat - it is simply impossible, since belt prevents tightening the latch, no matter which configuration you tried. Did you detach the anchor? I did not see the securing both ends of the latch in the video - just tightening of the latch, with no means of finding out what is happening on the other side. Thanks

It shakes side to side… I have to move his seat all the way up against mine to get it to stay completely still. Thank god I don’t have long legs or I wouldn’t be able to fit in my driver seat

Thk you❤😅

This video fuckin sucks. It doesn't say shit about the big strap on the back of this seat. Directions don't say shit either

They should add a how to fold a stroller inside an escape room . Frl so complicated