Відео

Sorry this skidplate system does not fit the Rebel Trim

sorry the Badlands APEX will not work with this kit. Its specially designed around the winch shown (WARN VR EVO 12-s) as its fits perfectly in the tight space.

There are some similarities, but its a different mounting kit and has some extra brackets. Here's the instructions for that one: cdn.shopify.com/s/files/1/0424/1263/8369/files/MN0136_A_-_Hidden_Winch_Mount_2013-2018_RAM_2500-3500_6.7L_Cummins.pdf?v=1733845910

we're waiting on the right truck to put a video together, but when we find it we'll do one!

Yes our mount is compatible, we have tons of customers using them. The clutch relocation handle upgrade is not compatible though, so if you like that easy to use feature, it’ll have to be a Warn EVO

The squadron pros are 41 watts so a bit over 3 amps each. We run the centre three lights on one harness and the outside 2 on another. There are two 20A ports on the 8 gang auxbeam that will be more than sufficient. Our harnesses come with male deutch connectors, which fit most lights. The baja designs lights use a different connector, we’ll look to come out with a compatible kit.

@ gotcha! I’m not super familiar with electrical stuff. Just to double check I can hook up three lights to one 20A port and the other two to the other 20A port correct?

@@Jr-eu9exno problem - happy to help. So the three lights will draw 10 amps. To safely size the fuse correctly times that by 1.25, which gives us 12.5A, so the 15A fuse port will be good. That leaves you the 20A circuits free for a larger accessory draw

@@vicedesigninc oooh okay that makes sense.. now I have an excuse to make an un necessary purchase to use one if not two of the 20A slots 😆 Thanks again for the info and replies!

They are currently on sale, no promo code needed! www.vicedesign.ca/products/slimline-reverse-led-lightbar-kit-ram-trucks-1500-2500-3500-rebel-trx?_pos=1&_psq=slimline&_ss=e&_v=1.0

Correct. Our mount kit is designed around the 8 gang panels. Specifically it is compatible with the following Auxbeam versions: BA80, GA80, RA80 & RB80

@ it’s fine for me. It does what I want especially considering the for some reason they don’t make anything like this in Australia. Most videos I’ve seen people are zip tying them in place.

The Hemi powered trucks are solid, the Eco-diesel powered trucks have openings between the webs

@ I’m in Australia and bought your sunbeam mount recently. I like this light grill design. When the wife isn’t looking I might buy one.

www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-2013-2018-ram-2500-3500-6-7l-cummins

Yes it will

Just fine, we ran this kit throughout the entire summer and didn't notice a difference.

Good to know, thanks.

Yes it works with the 2500 Rebel Hemi

We build a specific one for the Hemi 2500 here: www.vicedesign.ca/collections/hidden-winch-mounts/products/ram-2500-3500-2019-2022-hidden-winch-mount

Thanks for your support!! Enjoy

@@sgtedubb4646 in the works! What would you like to see for those trucks next

@vicedesigninc Would like to see Vice designed front w/winch & rear w/spare swingout for 2022 2500. The 1500 bumpers came out sick!

@@brandonruddick2306 we love it that you love it

@@vicedesigninc do you guys sell the bracket for the interior switch panel by itself?

@@brandonruddick2306 yes we do. Here you go: www.vicedesign.ca/collections/mod-bumper-components/products/auxbeam-interior-cab-bracket-ram-1500-dt

Great question I wish they would reply

I bought one from them and am in the process of installing it. If you have purchased an Auxbeam from Australia it’s different. I bought a 6 gang Auxbeam from Auxbeam Australia via Amazon. The 6 gang is a completely different design than shown in this video. It fits under the bonnet but it’s much higher, the opening lid is on the side, and there is no breaker included. It looks like it’s not necessary with the 6 gang. I was able to use 1 predrilled hole but had to drill a second myself. The 6 gang Auxbeam is completely different as I said.

I just watched the video again and I think I answered my own question. I don’t think you can do it with those pods

@@crazyfly01 yeah how they sit in the video is how they sit, which is a bit recessed from the front of the bumper. The Baja design 3” pod lights fit recessed more but they are about twice the price.

Yes it will!

Good question. If you trace that stud back it goes directly to the battery positive. If you attach it to the battery positive clamp then you can't attach the red plastic protective cover that protects anything from grounding out on the + terminal. The unfused #2 stud is the perfect size and a cleaner way to wire it and achieves the same result.

⁠​⁠Awesome! Thanks for your response! Great video! I have the same truck and I was having hard time finding the ACC fuse in the fuse box. This video is a savior! Also, I have already installed the aux beam kit in the hood but not the switch, hence I was wondering if I could find the bracket for switch only. The one that you install at 8:20

@@vicedesignincdo you sell the Auxbeam Interior Cab Bracket | RAM 1500 DT separately?

@@tejasthakur324 we do. Send us your shipping info here: www.vicedesign.ca/pages/contact-us and we can put a manual order through for you

It sure does. We’ll have a look into it

love to hear it. Congrats on the ne GT Rebel!!

@@vicedesigninc thank you 🙏🏽

It refers to the bodystyle. In this case its the 2019-2024 model year

This kit should be compatible with 4500/5500 trucks equipped with the 6.7 Cummins HO and 6 speed Aisin Transmission

@@vicedesigninc Hi thanks for the reply. UA-cam never notified me of it. "Should" has me concerned. I assume you are aware that the frame rails are different on a chassis. Then again the bumpers are the same. I will give a call to double check before ordering.

The bumper mount has adjustment. Try loosening the bolts off at the frame side and sliding the assembly towards the truck. The other thing you should check is that the bumper is sitting right up against the bumper mount. There are locating pins that need to sit in holes and if they do not, the bumper wont sit properly.

Thank you! The wheels are 18" Raceline Gauge's in Satin Black and the tire are 305/65r18 Wildpeak AT3W