Відео

Bestek puts out 2 different versions of their 500 watt inverter. One is the Pure Sine Wave that conforms to UL STD 458 and is Certified to CSA STD. C22.2 No.107.1. This runs about $70. This is larger than their other 500 watt inverter. This is also stamped with 500W Pure Sine Wave Power Inverter. From cigarette lighter plug it consistently outputs 108-109 watts to my 600watt power station whereas the cigarette lighter charging cord that came with my power station only puts out 27 to 37 max watts to my power station depending on if I am drawing power out from station same time as charging it. I am able to charge with this inverter and pull power from power station same time as well. Even while doing so it consistently inputs 108-109 watts no matter what I am drawing from station. This charger comes in red, black, or blue color. From battery it draws about 455 Watts. The limitation from cigarette lighter plug is due to car limitation set by car maker for this power plug. The other 500 Watt Inverter is smaller in size and runs in the $40+ to $50+ range. It does not claim to be Pure Sine Wave and also does not mark it as modified sine wave which can destroy sensitive electronics. Watch what you are ordering. I have run my inverter for hours and it never got warm. Amazon does not separate the reviews from one or the other. They group them all under each inverter. Unless the individual lists exactly which inverter they actually bought there is no way to tell if review is for the lower quality 500 Watt Inverter or if it is for the higher quality one. Pay the extra money. Get the better inverter for the health of your beloved electronics.

The 500w old version is not good they say

My Lincoln has a tfi i replaced it the problem im having is no injector pulse on crank hit it with either and it will start and stay running.40lbs at the rail looses pressure once key is off

Thanks alot

Why replace the carrier bearings if you're only changing the gearset? Set the pinion depth, throw the carrier back in, and recheck the backlash. It likely didn't change.

What is Energy Saver mode? Does it continue to keep the room cool?

I just install the 10K unit in my shed. So, I am trying to learn something about the energy saving features. I noticed that my fan is always running, but I guess that is no big deal. What is Dry Mode? What is sleep mode? I am so used to the AC in the house kicking off when it reaches the correct temp, that this unit is throwing me off a little bit.

Mine lasted less than one yr. Piece of junk. My froze solid 6 months in. Followed all instructions. Avoid at all costs. Midea is a hunk company

I use to race mustangs and did so many gear swaps on mustangs for people. All I used early on was a bearing separator to remove bearings then a pipe to install the pinion bearing and a socket for carrier bearings i pounded them on with a heavy hammer but the pipe and socket were the perfect size so only the race part of the bearings were making contact. I bought a 20ton press to make my life easier after a few lol. You only want to make contact with the race of the bearings you don’t want to put the outer race on to press it on. To make the crush sleeve process faster I use a set up pinion bearing the small one next to pinion seal. I install the pinion without a crush sleeve and tighten the nut down just until there is no play in the pinion, the using a caliper i measure from the pinion nut to end of pinion. Remove pinion from rear end, the put the bearing, yoke and tight nut until the same measurement from pinion nut to end is reached. Then measure distance between the inner pinion races where crush sleeve would be, then measure the new crush sleeve. Say the new crush sleeve is .050 larger then the measurement what I do is put it in the press to take out half of that which makes it a bit easier and I also have the longest 1/2in breaker bar Mac tools makes that helps a lot too. Last thing they make a long thing 12 point socket for the drive shaft bolts so if ur ever gonna do one of these again i suggest getting one.

🙏👍

It would help you tremendously if your using a 5g device, with full service, even throttled you would still get significantly more bandwith that you will on 4g

What valley is that?

I still don't understand why you have to tear the whole distributor apart just change out the pickup coil

Just bought this fridge. Very impressed 🎉

Trying to get a picture of the bottom of a 1982 CM250 custom’s seat. Working on restoring one but I don’t know what seats might be compatible. Can’t find an exact replacement. Anybody who has a pic of the bottom of an original seat, please contact me!!!

Don't change the soil! That was your premise. /even concrete fractures. The question is, "are they structural?" Another question, "Did the Indians and Mexicans, in days of old, go totown to get their soil?" Of course, the answer is, "Hell no!" How about getting a person-with-a-tractor out there to dig a hole and get you a pile, the size you need. That's what the quariman did!

It seems like you're doing a lot more work by piecing the load together and continuing to arrive at a "feel."You have all the tools you need for consistent load-quantities. Assuming that you're using the same soil, all-the-time, couldn't you arrive at a ratio of soil and water and just put in those quantities for each load and always get the same "feel?" You have all the tools you need for consistent load-quantities. Assuming that you're using the same soil, all-the-time, couldn't you arrive at a ratio of soil and water and just put in those quantities for each load and always get the same "feel?"

How do you know that the stemwall(in the plastic-wrap) will not break down, which would leave your wall hanging?

You filmed yourself. It wasn’t helpful at all.

Hi, can you tell me how many teeth the front sprocket has? I'm asking because I also have a CM 250, but mine goes at a maximum of 105 km/h But it was 125, but the cylinder was changed to 250, maybe the gear is from 125.

The temp being high on those screws is totally normal it's where the mosfets are mounted actually, install it lower and vertically I bet you will be fine.

Still happy with it?

thanks for the in depth review! esp the part about highway speeds, since they didnt have that in their own videos

I was concerned about the heat coming out of the unit. On an already hot day, that would be miserable! How much hotter did the room get?

Thanks Ron I’m hoping this fixes my problem. Was your motor a fuel injection type?

Good job man, I very replaced spider gears and rebuilt lsd friction disc's before, next stop ring and pinion replacement.Thanks for the help, great video.

Have you thought about Hempcrete for outside insulation on your house?

Wondering how this would do on a 6k rms amplifier

My 12v 3.8 kw Ampere Time 300ah LiFep04 battery ran my 5000 btu air conditioner in my 5th wheel I live in from 3am until 6pm after storms recently and used 3.2 kwh. Wind was less severe here but extreme just a few miles away.

Nice review

Thanks for the work in putting together this video. I'm about to change the ring and pinion gears on my 92 F150. It has the inline six with a five-speed tranny and came from the factory with 2.73 gears! Can you believe it? The original owner must have delivered pizzas in Kansas! I'll also be putting 4:10s in it as well.

Great video, however if you're going to run 1000 watts you're going to need a bigger inverter because you have that one running full open and that is going to cause heat, also you need to get that thing out of that little cupboard down closer to the floor level because all your heats up top of the room and even though the fans blowing that little cover is not going to let it vent enough even with the door open.

Can you please tell what county this is?

Does the tube material not UV degrade ?? ... or just rot ?? 🤔 😎👍☘️🍺

Leaving the cat camera whack in the video just got you a new sub 😂

Great video! It's bee a few years how is it holding up? Any problems since this video?

Im hoping this can charge my phones, steam deck, laptops and maybe some lights. I went with the 300 watt version. Hopefully its enough, fingers crossed 🤞.

Next test should be on an oscilloscope. No load and full load and watch what happens to the “pure” sine wave. Does it stay clean or does it deteriorate?

Had the same bike back in 1988. My first bike. It was a cm custom 250 with crash bars. Wish I still had it. Fun and easy to ride. My second bike was a honda cx500 custom with a Windjammer. I loved that bike too. That was the good Ole days.

😮 are you both coming back? I was enjoying your episodes.

Good video, thanks for posting,

CTC ??

Which way round does the friction plate go?

Great video Doing this today. God Bless

awesome stuff, extremely helpful.

any more videos🙂? It all suddenly stopped. The community tab is a great way to keep your subscribers informed.

what town is it in? I’ve been looking in AZ, but you run across building restrictions for the size home we want to build. Cochise county has an opt out, only for 1 building less than 200sqft, but it’s really not an opt out. They still inspect. Who wants to live in a box off grid? You bought land to build until your heart is content. Does Taos not fit all those requirements? I’m not sure what req, if any, are there. Where can i go to look more into land out there? Thank you so much!

Any update? Thanks

I noticed your coolant was low , I have the exact same car and noticed my coolant gets low very slowly over time

BRAWNDO IT'S WHAT PLANTS CRAVE !!!