Відео

Thank you Shaun !!! I haven’t used my Omron in over 5 years and was about to toss it and order another one. But i came across this video and said why not try it 😂. By my ultimate surprise i used my drill , a hairdryer , time and patience , 30 minutes later it works again ! Thank you so much 😊

Brilliant - i was about to throw away or send for repair my Omron BF400 - 5 minutes with a screwdriver and hairdryer - hey presto it's back working. Thanks Shaun !

Legend. Worked

Thank you - I managed to repair mine thanks to this video

But mine is Eufy X9 and I couldn't open the wheel.....

Thanks man😊

I’d does not find the eufy network

it will take 79000000000000 weeks to fix that up

I just major brownie points for fixing this for my mom using your video. I appreciate it, thank you!

Thanks!! I could fix my vacuum

This is a really helpful video. We are going to try resurrecting Dirty Hairy now thanks to this video.

Yep. I followed your video and it was the exact same problem. Thanks so much.

thanks bro you're the best teacher ❤❤❤I have learned so much about your repairing ❤❤❤❤❤

If you still get the same error after a new battery. Try pressing the main button on the top and push the pumper at the same time (10 sec) until the error stops

I liked your video I have the same fault on my xbox can you please give me the Part number of the Mosfet so I can get them Much appreciated

BIG THANK YOU SO MUCH !! I was ready to scap it !! It was exactly like this and works great now

You`re a genius! thanks for this tutorial

Thank you Shaun.

your video fixed my problem, thanks man !!!

Thanks - you inspired me to look our old "dead" Robovac, "Humphrey". Turns out I never put the springs back on the wheel motors after replacing them follow the feline diarrhoea incident. So it would just stall on carpet, but work fine on floors.

Thank you for the tip it was spot on! On the exact same scale with worse looking display - working again as new!

Sorry but this didn't work for me. I have a 5 mgh wifi and it says it only works with a 2.4 mgh

I just want to add - both wheels should show friction when they're working correctly. in my case a cog in each wheel mechanism had issues.

Brilliant. I was just about to throw my scale away and this was last effort to find a solution.

I had this issue today, son the wheels a bit to no avail, then came across your video. I was just about ready to check the connection and decided to spin the wheels a bit more and then it worked!

My scales had been in storage for 2 years while we were searching for a new house. They demonstrated this fault and, before I junked them, I looked at this. After two minutes with my wife's Dyson hair dryer, It worked perfectly! I couldn't believe it could have been such a simple fix. Well done Shaun

Thank you soo much! My almost brand new eufy x9 pro gave me the same error message and I already saw that one wheel was moving not as freely as the other one. I will try to cure it like you did. My first idea was that there might be fibers from the carpet somewhere clogging up the wheel's bearing so it would be nice to look between the rim and the cover behind it. I will try that.

Thanks, worked great.

Mine is the mi vac mop 2 pro...i need to pry open the body just to get to the sensor.🤬 Mi made it hards to clean and maintain the robot

Thank you for the video! Helped me greatly!

Replaced my battery and it still beeps :(

Due to similar LCD issues, I had already opened my BF511 once and had tried to give some pressure with a small spatula to the ribbon cable. I did have the right hunch where the problem would be. However just physical pressing the ribbon did nothing. Of course I should've first checked youtube for tips. After giving some heat treatment with a heat gun together with some pressure, I could identify the bad contact in the ribbon. And after a few delicate heat rounds, I could get the display back fully. Thanks for the enormously helpful tip, you saved one more scale today :)

The scale you used in the end isn't the broken one, it is obvious from location of the dust patches. So I suppose you couldn't assemble it back after you broke holding plastic pins there.

What about those who don’t have a Wifi router connection at home ? How should they the device to wifi?

Amazing! I just followed your method on my Omron HBF-516 (that was about to get sent to e-waste at junk yard) and boom! Back in business! Absolutely brilliant. Thank you for the tip!

Thank you Shaun, saved me a packet on new scales. Legend mate 👍

I just had to change out the ps on my daughter's XB1S

Error S4 ?

Shawn hate to say you have not done Bull -- the problem people have is changing there Wi-Fi router when this thing has already been set up

thank you for this! also my issue, found the cogs but not on ebay, on something called joom

What could be the problem of corrosion, it happened to me too I didn't spill any water at all

Thank you just watched your video and fix my wheel there was a mask down in the wheel well. I'm glad that's over! Wearing masks and all! Saying hello from Texas in the United States of America happy Fourth of July!

I still can't connect

Quick question is it? The password you created new one or the one from your home wifi?; please answer

Skipped the part where you put the front bumper back on

Well done sir! I enjoyed your video.

Good job ! You are so smart !!

I don't feel any effort on it. I just feel that u r lucky. Because, by WD-40 the error s2 has been solved. And u don't even open the wheel mechanism for ur viewers. Im so sad bro.

yeah well done.... good fix

Thank you, I was able to fix mine too