Відео

would this work on a 2017 dct

Very helpful. Thank you!

Thanks for the video! Any indication when the cruise control is active? A green light or anything like that?

I'm the cruise control engineer that did the original Harley application, and later helped on the BMW K bikes. Is it the case here that if you are using cruise, and pull in the clutch, the engine will just rev up as the bike slows? Not good.

I finally ordered a pair at a 50% mark down. Can't wait to set these up! :)

What's your wheel and tire setup?

Hi. I’m interested in modifying my heated grips, but the grips on my GasGas are the ODI lock-on type. What grips are you using? They look like the classic style. Could you share some advice or information on how your grips are set up?

Awesome video. Thank you so much for posting. For me is between the Transalp or the Africa twin dtc. I like your setup a lot but the weight scares me a bit.

Great video! Best setup I’ve seen yet. I have the Rekluse LHRB on my dirt bike and there is feedback when trying to use both pedal and lever. I like what you’ve done here!

Never installed an allen key before!

Hi grate video will be doing this soon . Can u tell me the part you used from the vt1100 as i cant find it anywhere

I'm looking on line and can only seem to find right hand brake levers, is that what you ordered ? Thanks in advance

What a great video. I'm pretty mechanically inclined but was apprehensive about attempting this job. After watching your video, you've made me feel much more comfortable about doing it myself. And kudos on the parts list. The guy who helps me at partzilla probably will appreciate it more than me. I've had trouble finding tank protectors for my 2022 ATAS dct. The ones you have look really good. Can I ask who makes those? Thanks for your time and energy. You're good at what you do.

Will pulling the clutch lever or rolling the throttle forward deactivate it? Thanks for the video

Great video, my dude! I'm looking to do this very thing! Also, what rubber tank protector are you using? That looks very grippy and comfortable. Thanks for sharing! 🤘

So where did clutch go ?

Great video thanks, Just one question, i ordered the same teardrop installed it making sure to put the O-ring first, put back the philip screw, but i get fluid leak when i apply pressure on the break, it’s like the teardrop goes backwards. Any idea how i can fix it ?

So, a leftyoctomy then.❤❤❤❤😂😂😂😂 Great vid for those that need to do these kind of things. Many thanks from UK 🇬🇧

Great video, thanks for sharing! Did you have any problems with the parking brake lever assembly hitting the fairing or the windscreen when the handlebar is fully locked to the right? I have the 2019 model and the burkbuster alone is almost hitting the windscreen (5mm gap) when fully locked to the right. It is because I installed 20mm raisers and tilt the handlebar a bit forward.

How can you own the l800`s and think they have passive radiators?

Thanks a lot for sharing. It is nice to have the same interest and idea. Subscribed. Looking forward for more videos.

Man these are going for 3k new on ebay in 2023 what a deal imo.

Is your parking brake OEM? I have a 2015 Honda CTX700N DCT and it would be nice for the controls to match what is on my 2021 Yamaha Zuma 125 scooter. I do not mind the right foot rear brake pedal on the Honda, but it would be trick if that were a redundant accelerator control… great info in your video!

i am searching the solution for months. so good.

Really good video

Simply Brilliant innovation. I think due to the DCT this is almost necessary as DCT has both brake biases and it is better controlled with your right hand. I have the foot shifter too. I will eventually get to this. I will try to keep both the foot and the hand lever if I am able to figure this out. First things first , Barkbusters.

Absolutely the best video out there for the left hand rear brake mod! Thank you for creating it. It really is a game changer for low speed maneuvers to help moderate the DCT since we don't have a clutch to feather (and no, I don't miss it). I was able to get mine done in a relatively short period of time once I got all the parts. Sourcing the master cylinder and the brake lever was really time consuming. I ended up getting a used master cylinder from E-bay and it was in surprisingly good condition. I also had a really good customer service experience with the Sic Shop. Super helpful and accommodating. I ended up using their "custom" 56 inch brake line with a 70 degree bend on the master cylinder end and a straight on the other. Like you said, it could have been 54 inches. I spent some time getting the teardrop installed since the o-ring is very firm and resists compression. I ended up putting the o-ring on the teardrop and then a used a little brake fluid to help lubricate it. After that, it was just patience and gentle persuasion. Once everything was torqued to specs it has not leaked a drop. Lastly, the clutch perch gave me a hassle, so I cut off the mounting "ears" and then used the center section as normal while adding the ears back in as spacers. By doing this I only needed to add a 1/4 W x 1/2 L x 1/8 inch thick piece of aluminum bar as a spacer to make the parking brake rock solid. I used BadAssEngineering's method for bleeding the brakes and it worked like a charm. No muss, no fuss. Just take your time. Here's the link for anyone that wants to give it a try. ua-cam.com/video/Vh9vpVejl1E/v-deo.html

Aren't there grills that go on the top as well?

Ok. Quick question is there a check valve in the system?

Excellent video! I love the DCT AS but, miss the clutch for those slow speed maneuvers where power finesse is needed. I have a left hand rear brake on my electric bike and quickly learned that it is the bomb when working in tight spaces. I have looked at a lot of these mod videos and all lacked the detail that yours provided. The parts list was a great add-on. I ended up buying a "used" master cylinder because no one had new units in stock anywhere in the world! Apparently your video caused a supply chain problem. 😄

Hi! I’ve done my installation tonight :) Can you give us the color of the two wires for the brake switch? Thx you :)

I almost did not buy the Polk Legend L800 speakers because of the UA-cam Video Reviews. My experience with them only and I cannot speak for anyone else, but my source is Movies on VUDU where I now own 397 Movies the vast majority is in Dolby Vision and Dolby Audio and UA-cam Videos where I have of 1500 Audiophile videos saved in a Folder and The Audio on Movies and UA-cam videos are worth the money Polk is asking for. When I bought theL600 and paired them with the Onkyo TX-NR7100 it was Extraordinary then I replaced the AVR with a Onkyo TX-RZ50 then they went from Extraordinary to Phenomenal and this is in my Guest, Game Home Theater room. So I was going to buy another pair for the living room since I was so Impressed but for some reason Bestbuy on longer had the L600 in Black Ash, the only choice I was left with was the L800 in Black Ash when I got them I paired them with the TX-NR7100 and I could not believe that these L800 are Astronomical they are doing more with less connected to the Onkyo TX-NR7100, I would have totally missed out, I am so happy Bestbuy did not have the L600 in Black Ash and it forced me to buy the L800 in Black Ash the difference was noticeable instantly and the UA-cam review videos would have caused me to miss out on speakers that are Astronomical. I don't have side or rear speakers but these speakers make sound come out the wall not bounce off of the wall but come out of the wall if the audio is there and I can't believe what these speakers can do.

Finally a video with a part list! Much thanks. Any reason you chose a lever from the NC750D and not the Silverwing?

Awesome job. Where are you located? Florida here.

Hi, great video. Did you have any trouble with the teardrop pushing out when the brake is operated? I have done the mod, but the brake is soft and when I look at the teardrop I can see the pressure pushing it out. Any thoughts?

DCT and quick shifter, how does that work work ? Maybe a good reason to do another video. 🤣👌

Nice work man

Hi, what is diameter space that you put the Allen key in? Or what size of Allen key you use as spacer

First video where all information is provided nicely. Thank you so much for this.

Suggest for u for hand parking brake lever use from honda rebel 1100. All master cylinder are the same from cbr 1000 or fireblade 900 mk1

2 years later and still waiting for your review video of the L800's LOL!

Great video thanks, interesting master cylinder, I’d guess other switch contacts are for cancelling cruise, so you probably could use those if needed. I’ve done this on mine, couple of other notes, especially for UK. Using the rear brake lever with this set up does not give ‘feedback’ on the handlebar lever, the handle bar lever becomes the master cylinder reservoir for the whole operation. You can’t use both handle bar lever and foot lever together at the same time though. The tear drop unit is called a brake junction, Race Torx sell this in EU and UK. The 20* bend at the bottom, turn it around so the hose angle toward the master not away from. It’s a really worthwhile modification.

Nice video. I have a 2022 as well and was wondering how you like your Corbin seat? Is it the low or high version? Thanks

F

I never knew about this conversion, I liked it, congratulations.

500lb Mountain Bike with DCT...The Word is Awesome!!!

very good buy.. wow

Wooov what a beautiful speakers Enjoy with them. I have signature s60 i love Polk audio

Polk Audio Legend Series L800 Pair With Anthem STR Series STR Integrated Amplifier 💟☮️

Wished I had $6,000 to get a pair myself. 😉