Відео

Pushing the Samurai 120 past failure! Spindle Stall! 4000mm/min Today we pushed the Samurai 120 into the unthinkable, and achieved 11MRR in aluminium without flood coolant. These cuts equate to 400% spindle load! The spindle stalled due to lack of coolant, but the Samurai kept cutting regardless and didn't gouge the part. If it stalled during a continuous cut the spindle servo would exceed posi...

Testing the Samurai type 1 ATC V1. Despite only using 3D printed components, the machine is able to change over 400 tools continuously without any issues. V2 uses titanium components to replace the plastic. The Dual ATC holds up to 28 tools and can change tools in 2-4 seconds. This machine with Dual ATC V2 is available to order at £7840. Buy now at samuraimachinetools.com/products/the-samurai-1...

Real part - Cylinder mount for Samurai 120 BT30 Spindle Video structure: PRE OP - A random collection of test cuts using different machining strategies including a slower manual machining style, and slotting with a 16mm end mill. Despite the stock sticking out 120mm from the vise and 130mm gauge length on the tool, the Samurai was able to take cuts many thought were impossible. OP1 - The roughi...

Demo cut - Samurai 120 High efficiency milling aluminum You asked for high efficiency milling, here is a steady cut in 6082 with a tool change demonstrating how the single ATC works. The machine can be pushed much further, however the current vise setup is holding the machine back. Please note the wobble in the ATC arm is because it is 3D printed for testing. Production tool changers will featu...

Max cut - Samurai 120 High feed milling Stainless steel This cut demonstrates the Samurai 120 pushing a high feed tool to its max capability. This is not a recommended cut for continuous machining! The air cutting has been left in the program intentionally so you can hear the table moving. Material : 304 Stainless Tool : KYOCERA MFH Micro 12/3 Insert : LPGT 010210 ER-GM ST1400 Metric Material r...

Demo cut - Samurai 120 High feed milling steel Material : EN3B Tool : KYOCERA MFH Micro 12/3 Insert : LPGT 010210 ER-GM ST1400 Metric Vc = 190 m/min fz = 0.45 mm/t ap = 0.3 mm ae = 11.6 mm Imperial Vc = 623 sfm fz = 0.018 ipt ap = 0.012" ae = 0.46" samuraimachinetools.com/ Contact us at contact@samuraimachinetools.com to inquire about a new machine

The official launch of the Samurai 120 Desktop machining center. As V1 nears the end of production, V2 is being developed and is available for order: Purchase the Samurai 120H V2 samuraimachinetools.com/products/samurai-120h-thk-hsr-lm-guide-ballscrew Purchase the Samurai 120H V1 samuraimachinetools.com/products/the-samurai-120h-1 We don't have an email sign up, follow our Instagram to keep upd...

The Ultimate Desktop CNC Milling Machine - The Samurai 120 Sneak Preview Coming July 2023 Sign up to the waiting list mailchi.mp/687f82e2d001/samurai-120

Funding secured