![Sebastian Oats](/img/default-banner.jpg)
- 40
- 418 771
Sebastian Oats
United States
Приєднався 11 лип 2020
A place to share knowledge and learn from new experiences.
Curt Trailer Hitch Install [2024 Hyundai Tucson]
In this video I walk through my installation of the Curt Trailer Hitch
Model 13485 on a 2024 Front Wheel Drive Hyundai Tucson SEL.
Tools Recommended:
Torque Wrench at least able to handle 50 ft. lbs.
17mm socket
14mm socket
Ratchet
Flat Head Screwdriver
Material for resting the Hitch if you are installing solo (optional)
I first attempted to install the hitch without removing the plastic trim piece that sits under the bumper....but long story short, it's best to just remove the trim, it's in the way. I can however confirm that you do Not need to remove or unbolt any part of the exhaust or muffler. Plan on taking about one hour for install, assuming you have your tools handy and ready to go.
Model 13485 on a 2024 Front Wheel Drive Hyundai Tucson SEL.
Tools Recommended:
Torque Wrench at least able to handle 50 ft. lbs.
17mm socket
14mm socket
Ratchet
Flat Head Screwdriver
Material for resting the Hitch if you are installing solo (optional)
I first attempted to install the hitch without removing the plastic trim piece that sits under the bumper....but long story short, it's best to just remove the trim, it's in the way. I can however confirm that you do Not need to remove or unbolt any part of the exhaust or muffler. Plan on taking about one hour for install, assuming you have your tools handy and ready to go.
Переглядів: 937
Відео
Pouring Epoxy [Backyard Shed Floor]
Переглядів 2,4 тис.3 місяці тому
Using Kisrel Epoxy to add a waterproof floor to my 5ft x 7ft outdoor shed. Brief details on using Gold, Gray, and White Mica powder. This video does not replace the specific product instructions, but shows additional context for using Kisrel epoxy after having poured more than 40 gallons in the last year. So far, of the Epoxies I have tried ordering from Amazon, I've liked this product this bes...
Passport Renewal 2023 [$190 Same Day Service]
Переглядів 126Рік тому
In this video I'll explain how to take advantage of the expedited US passport renewal process, from the perspective of someone with travel booked less than 14 days away. There are many videos already explaining how to complete the renewal form DS82, so here I'll really focus on the overview of the basic steps and then go into detail about how to get an appointment that meets your travel needs. ...
Replace Front Brake Pads - 2018 Mazda 3
Переглядів 4,2 тис.Рік тому
This video walks through my experience replacing the front brake pads on my 2018 Mazda 3. For the last week I've noticed some vibration / pulsing when applying pressure to the brake pedal and the braking performance has been noticeably worse for the last several months. The front brake pads are the originals and now have 37,000 miles on them. The tools necessary to perform this job are as follo...
Travel Crib - Guava Family Lotus - How to Setup
Переглядів 1,2 тис.Рік тому
Sharing my personal experience with the Guava Family Lotus Travel crib, now that I have used it 3 or 4 times. I'll show how to set it up and how to break it down again, and I review the actual packed dimensions along with the weight. I do recommend making your own secondary mattress from some inexpensive urethane foam (either 2 inches or 3 inches thick), the secondary mattress can sit directly ...
Linksys Hydra Pro 6 - Unbox and Setup
Переглядів 17 тис.Рік тому
Unboxing and setting up the Linksys Hydra Pro 6 Wifi Router. I paid $150 for this router on Amazon (on sale). UPC # / Model # MR5500 System Features: Dual Band Mesh Router, Covers up to 2,700 Sq ft. Accommodates 30 devices (connections) 5.4 Gbps total throughput Access to 160 MHz channels enables true WIFI 6 power Intelligent Mesh Technology with guaranteed updates 4 Gigabit LAN ports, USB 3.0,...
Using The Graco Magnum X5 For Exterior Siding
Переглядів 28 тис.Рік тому
This is my 4th time using the Graco Magnum X5, and it's the first time I used it outside to paint an exterior surface. I skip most of the setup phase and the surface preparations in this video, so that most of the footage is just simply showing the paint experience. Again, I'm no professional, and this was purely to show other amateurs and DIY types what you might experience if you also attempt...
2010 BMW F650GS Battery Replacement
Переглядів 10 тис.Рік тому
Replacing the battery in a 2010 BMW F650GS, in this case I will be installing a new Scorpion YTX14-BS 12v 200 CCA Sealed AGM Motorcycle Battery, which was purchased for $58.95 online. You will need: Needle-nose pliers Torx T25 Torx T30 Medium - Large Phillips Head screw driver Optional: Masking tape to temporarily cover the positive and negative connectors
Installing The Ryobi Cultivator Attachment
Переглядів 8 тис.2 роки тому
Video shows my experience opening a new Ryobi Cultivator Attachment from the Expand-It series of gas powered attachments, and replacing the current weed trimmer attachment with the cultivator attachment, then a quick demo in my garden.
DIY Epoxy Kitchen Counters and Sink
Переглядів 6122 роки тому
Video showing my experience pouring my own epoxy kitchen counters and sink. I used Black Mica Powder to make a dark base, and then I made accents from gold, copper, rose gold, and orange mica. Recommended Supplies: Epoxy Kit(s) At least 3 containers for Resin, Hardener, and Final mix Smaller containers or plastic cups for mixing batches of color accents Paper, or drop cloth for controlling the ...
2018 Mazda 3 Rear Rotor Replacement
Переглядів 9 тис.2 роки тому
In this video I show my experience replacing the 2018 Mazda 3 Rear Brake Rotors. I accidentally let the pads wear out and therefore ended up with rusted rotors. After replacing the rear pads I wanted to see if regular use of the pads might wear off the rotor rust, but after a couple weeks effort it became clear that this would never happen, so I ended up at Autozone to buy some replacement roto...
How to Replace Headlight Bulbs - 2018 Mazda3
Переглядів 7 тис.3 роки тому
In this video I show how to replace or change the low beam headlight bulbs on a 2018 Mazda 3, when equipped with the standard halogen bulbs. In my example I replace the standard OEM H11 bulbs with Sylvania's Silverstar Ultra 55 watt H11 bulbs. At the end I attempt to show a before and after of the OEM standard bulbs vs the new Silverstar Ultras. Spoiler alert, the improvement doesn't show up al...
Replace Rear Brake Pads - 2018 Mazda 3 (With Maintenance Mode)
Переглядів 57 тис.3 роки тому
Update August 9th, 2021: Video updated to include steps for entering maintenance mode prior to starting work on the rear brakes, and for exiting maintenance mode after completion of all rear brake work. This video walks through my experience with changing the rear brake pads on a 2018 Mazda3 (equipped with the electronic parking brake). Spoiler - I went a little over on miles, and should have c...
Using The Bris Transom Wheels On A Dinghy
Переглядів 6 тис.3 роки тому
Using The Bris Transom Wheels On A Dinghy
Install Bris Transom Wheels on Dinghy
Переглядів 19 тис.3 роки тому
Install Bris Transom Wheels on Dinghy
Inmar 9 Foot 6 Inch Inflatable Dingy (First Run)
Переглядів 21 тис.3 роки тому
Inmar 9 Foot 6 Inch Inflatable Dingy (First Run)
Inmar Inflatable Boat 290H-TS Unbox and Setup
Переглядів 2 тис.3 роки тому
Inmar Inflatable Boat 290H-TS Unbox and Setup
Intex Seahawk 3 with a Suzuki DF2.5s Outboard
Переглядів 7 тис.3 роки тому
Intex Seahawk 3 with a Suzuki DF2.5s Outboard
2020 Suzuki DF2.5s - How To Replace Gear Oil
Переглядів 12 тис.3 роки тому
2020 Suzuki DF2.5s - How To Replace Gear Oil
2020 Suzuki DF2.5s Outboard Motor (Start-up and Break-in)
Переглядів 27 тис.3 роки тому
2020 Suzuki DF2.5s Outboard Motor (Start-up and Break-in)
Check and Replace Fuse on 12v Outlet - 2018 Mazda3
Переглядів 23 тис.3 роки тому
Check and Replace Fuse on 12v Outlet - 2018 Mazda3
Battery Replacement - Keyless Entry Fob - 2018 Mazda3
Переглядів 9 тис.3 роки тому
Battery Replacement - Keyless Entry Fob - 2018 Mazda3
How to Rotate or Replace Winter Tires - 2018 Mazda3
Переглядів 3,1 тис.3 роки тому
How to Rotate or Replace Winter Tires - 2018 Mazda3
2010 F650GS Twin - How To Change Oil
Переглядів 11 тис.3 роки тому
2010 F650GS Twin - How To Change Oil
Making French Bread 01 (Conventional Oven)
Переглядів 383 роки тому
Making French Bread 01 (Conventional Oven)
Eero Mesh Router - Unbox and Setup [3 pack]
Переглядів 50 тис.3 роки тому
Eero Mesh Router - Unbox and Setup [3 pack]
Can you update your today experience on this boat? I’m about to buy this but that cheap Transom scare me. Look like can’t hold hard accelerations.
This is made in China?
Excelente me sirvio de mucho gracias ❤👌
Thank you! I’ve got 3 jalapeño pepper plants I’ve got to repot
Like it. Thanks!
Interesting when I got my motor, I filled it with 380 ml of oil as it said to do. It was overfilled by almost 150 ml. My conclusion is that they do put some oil in.
omg! dude! Please remove this vodeo. I hate to bash you, but those rotors should never have been put back on the car. In fact, in many(mayby most) states, they would not pass inspection as those pads are dangerous and inadequate. Thank God they are in the REAR, cause if they were in the FRONT I would not hesatate in predicting you in an accident! If you are watching this video or have watched it, PLEASE search for another video.
😎👊🍻
Electronic parking brake...ahhhh!
The OEM brakes on the 3 are garbage. Mine, and the rear rotors were gone at 49000 km (30000 miles). I've had Volvos, Alfas, etc. last 70,000 and, like you I engine brake. Very disappointing.. Great video Sebastian.
I've never understood WHY not fill from the upper, the gear oil level plug? When the oil comes out, you know you're full? Why the procedure to fill from the bottom?? So the gear oil get into all the "nooks and crannies?"
@2:09 If the motor is level the the proper gear oil level is at the bottom of the fill hole.
Can you do both back wheels and maintenance mode just one time or do you have to put it in a maintenance mode for both sides?
Not a good idea recycling warm water from the engine . I think you should have a fresh cool water into your bucket. Do let me know if I am wrong.
Thanks!
nice shoes
Man thank you you really helped me
You should leave it to the professionals. That’s a Mickey Mouse job you did
Not me watching this video outside, on a 90 degree day and thinking, “oh thank God…the ice cream man is driving by!!” I wasn’t at all disappointed when you said, “sorry the ice cream truck is coming!” 🤦🏽♀️😂
Please change your disks with the pads guys
Thanks Mate! I’m the same, love driving my manual…unfortunately they are the dinosaur now with Mazda Australia only selling auto now. I also only had to change the rear pads at 80,000km but strangely still got the front at 150,000km. Excuse I heard was the G Vectoring kicks in through rear brakes.
Next time remove, clean and lub the caliper pins. For safety use jack stand otherwise ok.
why is everything so rusted, on such a young car?
Its a Mazda :/ 🤷♂️
A good trick is to punch a hole in the bottom of the filter to let the oil drain out, makes less mess. The Mazda 6 that has a cartridge filter has a bolt on the plastic filter housing for this reason.
Thanks so much for Your Video!
you got adhd timing lights just like me lol... Great video
Thankyou,! I could have been here all day. Mine is electric doesn't have the same sound.
Yes the motor is too powerful for the Intex.
3200 sf house is not small. I saw one of these for $100.00 online. Do you think this is a good router?
brother, this video was awesome, thanks for making it!
Do NOT rotate the pistons on the EPB cars! Push the piston straight in and make sure the markers are lined u.p perfectly. Rotating the pistons can DAMAGE the EPB. I suggest you also lube up all the usual parts (not the braking surface/material obviously but other metal on metal part.
Quick ? So if your not supposed to rotate the piston back in on EPB cars then why do some of the caliper piston tools work by rotating? Like the ones with the interchangeable discs they sell. Not doubting your advice just curious. Also so does not rotating also apply to the 2019 Mazda 3 as well? Thanks for any advice you can offer as I'm getting ready to do this job on the wifes car.
To have them work ,you need to grease them on the tips
When I saw him bust out the power tools to remove a drain plug I knew this was going to be a well-informed video done by a professional.
are you joking? 🙂 power tools are not ideal for finicky jobs where you want to avoid tearing threads or bolt heads.
@@SamuelLanghorn You've got a great nose for detecting sarcasm. How can I learn to be as smart and wise as yourself?
@@salazam sometimes I am a little slow 😞
It's called the caliper bracket that holds the brake pads in place.
So you’ll be changing the pad again in a month
Torque wrench and use bleeder screw to get piston in
To visualize oil level below top fill port. Insert a small Ty wrap. The distance below will be seen as oil on the ty wrap.
Hi, have you changed the fork oil on this model. I have the same one but I can't figure out what the exact amount of oil is. 550mm or 600mm? It turned out to be a big mystery😁😁
Just use a brush and roller!. By the time you taped and papered everything I would have had the room.completed. I am a self employed painter.
I wonder if the gen 4 models are done the same
A 10 hp motor fsct you can fit a 10 hp on there tryi t
Well my 500 dollars cosco boat can carry a 15 go motor and get on plane woth a bigger motor so the ride is not to bumpy tho
It’s rated for that bit you can use a 12 and above to get on plane I use a 15 ho Johnson motor amd work great on my 10 ft dingy maxxon amd hit plane week to tho
How often should the oil be changed. Or should I just add when low
Thanks man
Saved me trip to Auto Zone, thanks man 🙏🏾
What happens if you don’t put it in maintenance mode
The pistons don't retract, so it will be difficult or impossible to have sufficient clearance for the thicker new pads. You "can" manually force the piston to retract, but don't do that, you risk damaging the rubber or worse the piston.
ua-cam.com/video/iXH-deyCgm0/v-deo.htmlsi=tkUG9G1OKukv42vy
To see what happens go to Pine Hollow Auto Diagnosis and under Mazda group there is a vid called Brake Job Complications. Great vid.
There is an easier way to access the drivers side bulb by turning your wheel inward and popping off the 2 panel caps to reach it through the wheel well. Passenger side you'd still have to go through the engine bay though
Thank you so much!
Thank you! Grateful