Відео

Hard to watch.

I would so so so love if you made the other video you mentioned in the comments " ( PLEASE NOTE!! I will be making another video on air conditioner maintenance and how to put a cloth in the back of the drip pan to get the water to drip out at the end of the season without drilling a hole avoiding your warranty, and why a drip pan is needed, and you should not be draining the water in the pan !!) "

I have algae growing in mine!! I'm having major issues with standing water. I need to take it all apart and it's the middle of the season

get on with it

Thank you for making this video! This definitely helps alot. I have to clean the mold out of mine but it's waaayyyy too hot outside today. I can at least clean the filter area today thanks to you!

My unit has stopped cycling off. It cools but the fan just keeps running. The fan is set on auto. Does anyone have experience with the issue?

Does anybody know if there's a FACTORY RESET BUTTON somewhere in there? Or is there one at all? Or how to factory reset the U-shaped Midea unit? ⁉

Thank you so much, I needed this!!

8000 is to big for a small room but the midea being an inverter compressor it works fine. The compressor slows down and and the blower as well effective reducing the capacity of the unit. It won't be too humid, a standard PSC compressor window air, yes it would be to big and wouldn't dehumidify properly.

I was dying to see the blower come out. I guess I'll be mangling the fins and the black wire cage to get to the blower cage

Should add to tittle. How to tear down to clean mold Midea. Idiot's should have put a UV blue light in there forthemold issue. . That stupid moving cover is another issue when it cycles off for mold.

anyway thanks it was helpful can you tell me what type of crankshaft to order please

next time try putting the camera on the work your doing not the floor dont you edit????

What a waste of time. I will remember this video as "I'm not gonna do that." The front fan is what gets dirtiest and has the black mold, that's the part you did not do.

I have a black plastic piece i found outside after storm sitting under this air conditioner. I don't know where it goes on one side load line line load. Trying to figure out where it goes?

I got a good one for you, I accidently pressed the HEADLIGHT and PLUS (+) BUTTONS at the same time, and a screen called AC (ACF) showed up. There was a setting of 0 or 1 available. I can't find anything in regards to ACF, and I have no clue what it does... Can you get back to me and let me know what ACF is, and advise which setting it should be set to cause I don't remember if it was on 0 or 1 ?

I also bought the Midea 8000 BTU July 2023 when my house AC went out. It is very cheap to operate. So that is a plus. But just turned it on first time in 2024 and not working. NOT COOLING and error code 07. Called customer support and they will not honor the warranty unless I send a copy of receipt. Which I don't have anymore. So for around $400 I got about 4 months use out of it. Also had mold issues as most customers are noticing on the blower fan. Not happy.

I've read that this Midea U Shape AC is quieter than the typical box unit. I'm guessing that the sound is muffled due to the main AC being buffered by the window being down. Any ordinary box units that muffle the sound decibel? Not sure why I care. I run air purifiers on turbo.

Hey do you happen to know where I could source a control board for this unit MAW12V1QWT

I'd wish someone would actually show taking off the blower.

Pug

In italiano no mai

Thanks for the video, really helped me out.... thought I was missing screws somethere. One thing I did use, and worked great, after I knew these were clips.... Automotive plastic pannel tools. 2 of the wedges fit in the gap, and just move them along together, speaced out a bit... thing just zippered open on the sider and then top. Also used them to get the vent clips off.

Well done good detail best I've seen worked for Hey Bike Race Max

If you are not going to demonstrate how to clean the mold, then what is the point. You stopped halfway through.

I has questions did any one has the same problem at mine because when I open the front to clean the filter there was full of water I don’t know what to do anyone else know please help thanks

I reset my bike back to default settings. Know the bike will not power up.😢

When I start to pedal my t42, the motor engages and immediately shuts off. I see error on the screen under the number 25.

Thank you for letting me know I need to take out all the screws dude. You could have literally said just take the screws out all the screws unhook the connections. You made a whole video out of this appreciate all of your help

Now that we now how to clean the front what about the back of it…? What should we do about that?

I actually would have liked to see the cylinder removed as that is the part I wanted to wash out. Since you were doing a tutorial, it would have been nice if you had demonstrated how to take the front off, disconnecting the USB thing and the wire harness on the left side, even though you may not have needed to. You were already there, it wouldn't have hurt to show everything for the sake of the viewers. The rest of the video was very helpful.

The install was easy and had fun doing it, the quality of this unit is outstanding for the price hands down!

Omg just looked inside and the blue piece is covered in white. It does look like mold 😭 my jaw dropped when I saw the difference in color. I clean my filter like once a month. Have had it about 15 months with heavy use because of the heat. I’m so distraught now and scared to use it. I don’t think I’m capable of taking it apart and trying to clean it because I’m not handy at all 😢 the worst discovery during a heat wave and will no extra money to buy a whole new unit.

I miss ridding these e-bikes time to get back out their!!

It's a shape people making videos and don't know what they're talking about AC unit bigger then you need boy room will only make it cycle off and on more often not cause more humidity

OK I really need anyone's help here. I just got my t42 last friday aug 11th. And I already wrote to Gforce twice about this and they have yet to send me an intelligent reply. On the newest models, Gforce has decided to force a new feature on the T42. When you keep the throttle down for more than 8 seconds straight, the throttle remains on full power (cruise) even though you have released the handle. They have confirmed that to me yesterday. And that is a default setting now. You don't even need to activate it, it is setup by default and its annoying when you need to slow down, because it does not. In short, the cruise gets on automatically and to turn if off, you need to press the throttle again or use the brakes. I asked them, well great ! now how do you turn it off ? Because, you know its dangerous. And that was their official reply. «Just press the throttle again or use the brakes» hell yeah ! Now I told them we need to turn this off, it doesnt make sense that you can't turn it off, and i am still waiting for a reply from them. I looked in the whole settings and i can't find anything related to the throttle/auto cruise and yes i have the YL80C manual. Anyone who can help me with this would be most welcome !

Video killed the radio star

On the SCA menu what setting 0-3, 0-5, etc do I need to have both power assistance from the motor and also when I want to run it fully electrically? Do I need to include a setting with a 0? How does this work? Great video!!!

12000 btu (purchased at costco). Been in window almost a month. Corrosion/scale appears to be forming at the bottom rear fins. Also rust color water coming out where the frame meets at the rear. Notice the internal screws in the rear started rust after the first week (look through the side vents). Runs and cool fine. But if thats corrosion on the fins....it no way this unit will last long (cooling wise). Can someone educate me on this or has anyone one else notice this issue. And I purchased two units tested the first one for three weeks no problems. But the second not so sure. Any help would be greatly appreciated.

The 8,000 may be more efficient becuase it works less. And this unit has a variable speed compressor, so should be very energy saving. Thanks for the informative video.

how unlock speed over 60kmh?? because its locked from display to 60kmh...

Hate to tell you, but that screen is not stopping "micro organisms" from entering the unit. You would have to have a pretty significant filter to stop mold spores, and that would be too restrictive for the unit. Dampness and warmth is why the unit grows mold.

I have a Midea U shaped air conditioner, 12K btu do you know, from you being inside this one, if the front air blower/fan, behind the louver door is easy to take out and replace? they call it a cross flow fan. sounds like one of the fins is broken, and its got a bit of vibration, when in use

Why not drill of small hole on the outside corner underneath where the corners meet for drainage. That should solve any buildup issues.

I enjoyed the video I didn't realize the Madea's had a mold problem but I will soon find out I have purchased the 12,000btu I'd like to know why the fan runs constantly and thank you for the video

manuals says 2x monthly.

whole lot of steps u left out after getting this open

Just want to say thank you for making this. Installing it the first time around sucked. Taking it apart, reassembling, and reinstalling sucked a lot more. This was really helpful.

Any tips for what needs replacing or lubing for the room fan on this unit thats developed an electric whirring noise??

“I’m the grandson that says papa can fix anything!!”