Відео

stupid this guy keep on touching the contact area of the rotor it will contaminate.. you seems so intelligent enough in certain things but you are dumb with ALL things and by the way don't compare the cheap rotor from expensive hi-end one and telling it is the worst..

I go to the pro same 500w motor and best thing no flat tire

I can only get top 29 mph out of mine top speed don’t know how he’s doing this

Frame alignment tools are great to have as well.

Seems you need to understand the role that the materials, their thickness and the DIAMETER of the rotor contribute to effective performance

Wanted to put this bike at the top of my list, but that 150 lb cargo weight limit is way less than the Lectric XP's weight limit. If they're able to increase that in their next version, I'm sold!

7:50 Anyone who says, "kiddies" is someone who has no children.

I think ebike combanies should sell a "travel trunk" which is like one of those motorcycle lockboxes but designed for longtail bikes!

This is a 900-1200 dollar level ebike that costs 2000 dollars. No thanks.

Good revue, I' m looking for a small practical bike. What a wonderful place, nice bike roads.

Been useing hope tech 4 e4 brakes snd hope rotors for 6 years. Never had an issue, they worked flawless! I even damaged them in a crash and was able to buy the parts to rebuild them. Again flawless.

No seat and tube tires that will definitely get flats, no thanks. The Hiboy S2 Pro is a better deal.

I just bought Hope 220mm Centre-Lock rotors to replace basically new Magura MDR-Ps 220mm rotors that I could not get to stop rubbing, and the Hopes were more wavy than the Maguras! I had to use a center lock adapter for the Maguras bc for some reason they only make the 220mm MDR-Ps in 6-bolt. I thought this may be the cause of my constant brake rub, but apparently it was not. Fortunately I did buy a Park brake alignment tool and Ive been able to get both sets straight enough not to rub, but it never seems to last. A little play in the wheels, it rubs. A little side load on the trail, it rubs. A stiff breeze in the morning, it rubs. I kind of just accepted that its almost impossible to get a consistently perfect alignment on 220mm rotors, unless of course your brake pads retract a lot! Which mine do not as Im running XT/MT7 Shiguras.

does anyone know where the circuit braker is on this unit

So just Shimano Ice tech?

I haven't had Hope brakes for years, but both sets I had were junk(same with the hubs), I even had their fancy ventilated rotor. I run Intend rotors now because their science made sense, lots of tiny holes to maximise braking surface area and cooling surface area. Punching big holes in rotors just makes them get hot quicker and wear pads out fast for no real benefit. The rivets do almost nothing for alignment or heat transfer, stainless is a very poor conductor of heat. Multi piece construction reduces the chance of warping because aluminium expands at a much greater rate than stainless. So even though the hat doesn't get as hot as the braking surface it expands a similar amount. I'm a fat brake dragger that has tuned rotors black/blue but never warped one.

i just got my emtb and took it to behind my house i have some trails i finished an green 500m long trail and the rotors are worped, mind you i have them in sram maven ultimate's have to find something that can keep up with the calipers now

Well the science aside, when you are zooming down a rocky trail at ungodly speeds and realize that you need to slow in a hurry having brakes labeled 'hope' really helps! Mine have not let me down yet...😊

Great review, thinking of getting this for my son, he's 6'1" so I'm wondering if you think he'd have a problem peddling it? Of course he'll want to ride it like a motorcycle but I'm sure he'll have to pedal it home sometimes. Thanks for the review!

Go watch Flow Mtb on them there the worst to put on they ding out of true to easy to shimano ice tech and sram! I love hope ran them for years but will only run the new vented discs on my tech 4 think they are 2.3mm thick I have shimano 203mm ice tech and full XT on my other bike they are alot better have to say than Hopes floating disc's hate to say it as hope is made here and ran hope components for past 25 year's but when comes to safety of stopping power the new Vented disc's they have are the way forward for hope

Problem with the fantastic Hope 2 piece rotors, the rivets. They interfere with caliper adapters/spacers on two of my builds in 220/200. Make sure they fit!

is there any kit for that bike so i can make it 1000watts

upvote for GI Joe reference

Not heard it called a mech here in uk for about 20 year's call them a Derailleur nowadays, one thing though never bent a rear mech hanger in 30 yrs of riding lol that sounds to weird now

Great Review is there aany way to defeat the kick start restriction it's a real turn off for me? Thanks

i am all for thumb throtlez and brakes

Go with the Kaaba Wolf King Pro

The Veenicxfloopflappy drone. It's an SJRC F22.

ive had mine for 3 months, its a great scooter with awesome range especially being on the heavier side, my only complaint is that the battery percent is not always accurate, it will say 99% full on the scooter yet its only 88% full in the app, and theres limited options in the app

Looks awfully like a rebranded SJRC

🦆🐧🥽🏁

color science is awful, something is going on with that gimbal and or processing of the footage onboard, and why isn't this in 4k? I mean, we are talking about something that is going to fill the gap.

How does someone make a 9 minute video on this drone and not address the elephant in the room? The footage looked crap for todays standard, it isn't competitive, the drone isn't worth talking about.

my Cfly faith mini 2 has better video

OEM drone from china, in my country the drone brand and name is sjrc f22s😂

That would be a big no for me...

Does not come even close to the quality of DJI drones. Thats a a toy not a professional drone. After years of being a deadicated hobbiest and investing 10s of thousands of $$$, then to be told that the goverment might be shutting them dowm.... Nope im done. No more drones from me.

Looks like another Chinese drone anyway….

Why would anyone want a 480P drone? At least that's what the footage looks like...

Is there a sub 250g option that's competitive with the DJI Mini 4 Pro?

My first was a RCB with 500w motor, tops out at 18mph have to say I enjoy running errands with it on weekends and good thing I burn no gas

awful footage

so its basically the same as what DJI was producing 10 years ago..

wow a drone that looks like a refurbished mavic 1

Workarounds exist. This is already an uncontrolled consumer space. All these lobbyists are doing is keeping their personal paychecks flowing.

This is another drone from China (hong kong technically) - not sure how this is any different than DJI. That lens looks like it needs 16 UV filters. Could be your render of the video but its choppy.

There really should be a class action lawsuit if this ban goes through. The government was happy to take our sales tax on a product they said was ok for the last 15 years. This would really hurt small businesses. It would cause massive capitol losses to all of the businesses who paid for these drones. They should be reimbursing everyone who bought a drone that they nilly Willy decide to ban Plenty of arguments to be made.

If only someone could compete with DJI without having to ban them to do so , that’d be great. We’re not there yet 😢😊

Bill did not pass old news. Not in the works at moment

I work with dji.. To be honest this is insane. Dji does not do any spying for China, they cant be bothered. And most drones and parts in them will be made in China regardless who takes over USA... This is just someone trying to get in market without making good drones..