Відео

OUSTANDING 💥 !!!

This video helped me quickly diagnose and fix a bad tilt switch. Thanks!

I did this today, thought I fixed my propane patio heater but now I have a giant flame going burning off a lot of gas and not how it usually works when it’s functional. Worried that I missed up my thermal coupler. Any tips?

I have a question for the op. Upon removing thermal coupler I accidently removed the threaded tip (opposite side of spring) and what came out is connected to a line of copper My question is when removing, twisting etc did this line break or does it slip right in and threaded cap locks it in after tightening?

That’s very interesting how to fixed

This worked!! Thanks so much for the video. I bought this heater at a yard sale and it never worked for over a year until I saw this video

Thank you, I just saved Thanksgiving dinner that was on a screened in porch at an Air Bnb 👍🏼👍🏼

UA-cam university with DIY GUY! 💪🏻💪🏻💪🏻

Can you provide the items you purchased from Amazon ?

An older video I know, but I have one question from the vid.....WHY did you remove the thermocouple? What was the problem before you did that? My problem is the knob which regulates the heat....lo to high....makes absolutely no difference to the fllame or heat intensity.....any idea why? Thank for the video.

Is it necessary to install the small copper wiring thing?

Thank you!

My thermocupler will not come off. I sm pretty strong and have almost ruined the nut. Any advice there

MVP RIGHT HERE 💯

2 questions: I have the same pergola and tv mount, haven’t installed yet. Are you concerned compromising the beams by drilling holes and are you concerned with the combined weight of the mount and tv? Thanks in advance

Hey thanks for this, unfortunately on mine there was extra tiny piping that when you turn that center bolt, if you're not careful it snaps that metal tube, too small to solder. So I just dumped that one. Trying to see if there is a different way to bypass have 3 more that need to be done

How to fold under the weather

Thank you! This worked! Easy to follow video and easy DIY project.

You got it upside down.

You look like Garth Brooks

Thank you ❤

Hi, Great video just had a few questions. What bolts did you use to mount the bracket in the rivets. How do you determine what’s the best rivets to use for the mount or tv you’re trying to hang?

Superb job and very straightforward video. thank you so much!

Question DIY guy if you wanted to mount a 50" in that corner do you think you would have to move that mount up the channel further to accommodate the wider tv?

Can anyone link some puddle lights that work. The ones I have bought dont work ie canban errors

Your fix worked perfectly! Was going to buy a new thermocouple and your video saved me the $10. Detailed instructions done to the wrench size. Thanks so much.

Thank you for posting this! My neighbor gifted me a used patio heater when they were moving. They admitted to me that it had not worked in a while but knew I was decently skilled at fixing things. I tried bypassing the tilt switch, and that did not get it. Came across your video and pulled the spring and cap off of the thermocouple and it now works flawlessly!

Removing spring bypass it

Exactly all the things I needed to know!!! Just ordered rivet tool on Amazon, thanks!

Great vid! Literally just ordered your exact parts. Thanks for the inspiration

Great install! Question. With that mount, would it be possible to pull the TV forward and up until the screen is essentially flush with the underside roof for added protection when not in use?

That was a very helpful video. Just one critique. It’s a gazebo not a pergola. Pergolas have intermittent openings in the roof and gazebos have an entirely closed in roof. I only mention it because it was a little misleading when searching TV installation videos for gazebos

Thanks for this

Awsome job this is just what im looking for. Thanks for the breakdown very professional.

Thank you, sir. Thermocoupler was the issue. Salute!

This was a great idea and set of instructions. Not quite everything is self-explanatory, but anyone can figure it out. I bought a different rivet tool since the one you posted is no longer available and was disappointed with the sparse instructions and lack of a storage box for it, but was able to get the job done.

Please next time u do a video do better explaining like what size drill bit u use, size of the revit

So what size hole did u drill???

You are a tool snob… he😂!

Isn’t that a water channel to catch the rain and run it down to the corner where u drilled that hole?

Can you come do mine?😊

NOW MY DOME & MAP LIGHTS DONT WORK--- THE REAR SEAT ONES DO - THE FRONT IS TOTALLY INOP.... DID I RUIN THE UNIT SOMEHOW'?... 2010 XC60 T6

Unfortunately he skipped right over how tight engine mounting bolts should be...which is why I watched this

I was all set to install the mount you used on my Purple Leaf gazebo and realized that the triangle roof pieces have a lip that is going into the channel I was putting rivets in. Does your gazebo not have the roof pieces sitting in that channel you mounted too? I stopped my project shy of drilling.

I wanted to hang my 43” tv in my metal roofed gazebo and came across your video. I was trying to figure out the best way to do it. Had no idea about the threaded rivet tool. Bought it at Harbor Freight and within 30 minutes had the tv hung. Thank you for this video.

Perfect, thanks fella 👍🏻

Just finished this same setup. Thank you for all the info.

What size drill bit did you use? I’m planning on doing this same setup this weekend. Ty

never did show the most important part as how to adjust the cable???????????

Care to update? Would you change anything?