Відео

What kind of wheels and bearings are you using on those bad boys?

now what happens if you cannot remove the wheel from the bearings?

How do you feel about the Sure Grip Snyder Royal Lite plates? I artistic freestyle skate so I would like to know the ride height, weight, and adjustability on a Riedell 4200 boot.

I’m in SA, does the Rollercade sell these?

Very helpful explanation on sizing considerations.

Are u giving away any of those vanathane rentals

Are u giving away any of those wheels

Hi i hope you see this seeing this is an old video but I have some sure grip fame wheels 95a they are perfect indoors but once I get outside I lose my ability to be as smooth as I am indoors like everything takes so much more effort so I’m wondering since they are grippy as u can get for indoor wheels are they just too grippy for outdoor since obviously using them outdoor on unpolished concrete will be more grippy than using them inside so should I just get a harder wheel to combat the grip because I’ve tried skating in soft wheels to see if it’s the fsct the small rocks are slowing me down because it’s one of those concretes that are just made up of lots of small rocks but I hated skating in them so maybe I should get harder wheels

How do I get a set. I am so frustrated that I can not get a set. My skates are blue and i am limited to Bont FFX. is there any hope of getting a set of these wheel or maybe the next run? BTW any potential of a 7mm bearing? which will be even faster :-)

Im sorry man but why did you put a horizontal video, in vertical, with these blurs on the top/bottom. Instead of just making a normal youtube horizontal video. We're on youtube not tiktok. The actual video is taking 10% of the screen size, and your video is _already_ filmed horizontally. So why don't just put it like normal

I got these a month ago and they are so light and low, but the click-adjustment washer (with the "X" cutout) eats into the threads on the kingpin, they should use plastic/teflon for this part in my opinion. The kingpin could also use a general redesign because i hear other commenters are breaking their kingpins!

🌟🌟🌟I believe a slater’s “weight,” is a direct correlation to the cushion-nothing to do with height.🌟😊🌟 Thank you, for doing a physical test.👌

What can I do if I don't have a wrench

I agree with the bearing fitting but as far as the grip goes.😂 That floor looks like total doo doo. It needs so much polyurethane they might as well rip it up and start over 😂

The high tops are simply relics that manufacturers that don't want to let go of.

Good clip however falcon pilots chart says 438gram for one 7 plate . Avenger/avanti magnesium are about 238grams .

Slipping in by hand means that’s the tolerance isn’t tight enough, that means that the outer race can still spin which you don’t want

I’ve worked in many industrial construction fields over the past 20 years and you should always need to freeze bearings for them to fit in something properly. If a bearing slides right in that’s not a good thing, that means that the hub wasn’t properly machined for the bearing. I’m not sure why you think that a bearing should easily go in a hub but that’s completely wrong.

I've been practicing a similar move with my feet just bebopping around not really knowing it was a thing, so excited to find this video and enhanceeeeeeee to the next level, thank you 😎

what are you showing us all i see is a green text bubble

are you using normal ones or nts ones

I just receive this boot about a month ago. After rolling with a riedell 220 about four years, I was ready for this boot.

I realize this is an older video but I’m going to try my luck at a response anyway. When I was a teen I went skating every weekend. I bought my own skates but my friend told me the wheels were crap so he gave me a set he wasn’t using. They were on the smaller side and white. I used them and never had any issues. Fast forward 30 years and I am now taking my kids skating and getting back into it. I’m going to get myself a set of skates as I don’t have the ones I had as a teen. After some research I believe the white wheels I had as a teen were sure-grip all American plus. I remember my friend making a big deal about them being made of vanathane. I’m currently looking at some rollerbones nitro 97a. If I was on the all Americans as a teen would these nitro’s feel too soft to me? The rental skates I have been using seem too soft and make me work too hard. It seems that the all Americans rate around 101a is there that much difference between a 97a and a 101a? Any advise would be greatly appreciated.

it says the video is 1080 idgi

What do u recommend? Sure grip power Trac, synyder advantage or labeda proline? Thanks.

You bought these used for sure.... New ones come in a custom box with all the tools and extra cousions...

Hi, i was recommended your channel and I'm very new to outdoor rollerskating and plan to get into park skating and was wondering what the best durable lighter weight plates would be for a Moxi Panther boot :o I heard the Reactor Pros are lighter than the Avanti Magnesium and the Reactor neo.

My type of tutorial 💯, and this definitely gets a suscribe from me

Since this is a boot that Riedell does not maintain stock, the lead time is WAAAAAAAY too long.

Hi! I recently started to skate again at the Rollercade too. I’m starting to learn tricks. I don’t mind spending money on 220 boots. I just want a comfortable boot where it doesn’t hurt my feet so I can skate for longer hours. Will the 220 be better in that regard over the 120?

💯 Great review brother!

720 one and a half pounds is heavy😳

I’ve got some avenger magnesium plates and Bauer X boot for sale if anyone’s interested. Size 9 . Uk £310

I know this is older but it's exactly what I needed to know. Thanks!

So forgive me but how does that work if you loosened and then tighten again. How do you know that it’s not too tight anymore? What’s the outcome? When I can easily turn? Thanks

Could you make a video sometime on things to consider when buying plates? Like the different types of mounts and sizings and things like that?

Hey I know I’m late to the party and I just got back into skating. Do you have any idea where I can get a set of these? I’ve can’t seem to find them anywhere.

Just bought the 101 rollerbones turbo for my 395s riedells . Mind you iam 230 lbs 6.2 . Haven’t seen any review on them on you tube but I will doing a review on them . Some say they are to hard and some say they are fast and grippy l guess weight is a major factor at times and also the surfaces . But this was a great review. To me l think it all breaks down to the style of skating and preferences of skaters .

I’m going to be replacing my riddell 120 boot. Do you recommend the godfather or the v-line boot? I hated the riddell 120 because it was so stiff . I’m not doing any jumping. Just riding around my local skating rink so what do you recommend? By the way I have the Custom made Quadline skates by Richard Humphrey with quad inline skate wheels 🛞

Hey man! Thanks for all of these reviews. You had said you never ride a boot unless it is stitched: I thought A La Modes were not? Maybe I’m mistaken?

Just wanted to say that I appreciate the video. Not a lot of videos on the a la mode vnla skates even till this day. I bought a pair for my wife recently going off your review video. 👍🏾

I recently bought some wheels and put the wrong size barring in the wheels and now the barring is stuck in the wheel and i cant put it on my skate, do you know how to fix this?

Those wheels looked so good rolling. I love the color combo too

lol why would they call them rb and lb? It should be rr and lr for right rear and left rear just like cars. Lb and rb just sounds weird

Promo*SM

Nice video thank you for making it! These were suggested over the Prolines by my local proshop. Looked like you had jamplugs in and not running the NTS's am I right?

Hey - how can I send you a message about a specific issue that I'm having with adjusting my Power Trac plates after replacing my custom cushions

You aren't mad at the questions from people are you?😆