Відео

Been thinking of starting something. chucked you a sub mate. Cheers

🎉🎉

Getting mine soon! Thank you!!

I have one of the Manfrotto clip together stands you have. I rate it a lot. 😊. It's good to know the Neewer grips are okay.

Well said and very well spoken😊

Did you have any issues with the Sennheiser into the Theos? I was told it wouldnt work well as it needs 7v and the Theos only gives it 5v but it sounds good to me?!

Great video!! I’ve been deciding if I buy the Samyang and with your video you’ve taken my doubts!! Thank you!!

I also use a Deity Theos with a C70. Obviously there are many different ways to do this, but generally speaking in these kinds of scenarios, it is IMO better to use the 3.5mm out from the Theos D2RX (“Receiver”) into the 3.5mm "Mic" input on the C70 (Channels 3 and 4), with the external or on-camera mic being a professional XLR mic, rather than a 3.5mm output mic. The preamps on Channels 1 and 2 on the C70 are plenty good enough for a professional XLR mic. The “Out Type” on the D2RX would of course be set to “A = RX1 + RX2”. When taking the 3.5mm output from the Theos D2RX into the 3.5mm "Mic" input on the C70 (again, Channels 3 and 4), I set the C70's "Mic" input to LINE (pg 4 of the Audio tab). Then I can set the “Level” of the Theos D2RX receiver to 0dB. I then adjust the amount of Gain on the C70's "Mic" input (again, in LINE mode) to whatever is needed to maintain a consistent level from Transmitter to Receiver to Camera, usually around 55 on the C70's Gain for Channels 3 and 4 (pg 2 of the Audio tab). This should prevent distortion at each hop, and it also gives some breathing room in the gain staging at the D2RX Receiver level, vs. needing to have it all the way down at -20dB. Hope this makes sense.

Nice video man! I am new to sliders, but would like to try one out for my music videos. Which one would you recommend to start with of the two and why? Thanks!

Thank you for the video!!

Hi friend, do you have any interested in reviewing the synco xtalk wireless intercom headset ?

what's the name of the stand you are you here?

Hi! Is it possible to use the Mics directly when filming on an iPhone, instead of the Build in mic on the phone?

you can correct it in post

Congratulations on the video. I found it very interesting, I have a Rode Wireless Pro with a COS 11D It seems to be going into saturation, What sensitivity do you recommend setting on the TX to avoid this saturation? In your opinion, what are the best settings to pair the Rode Wireless Pro with a COS 11D?

awesome man. good to know. i mic 2 rugby players up with lav in a GPS sports bra and the signal cuts in and out but that was expected. sometimes i can hear the audio and they are 50meters away.

Hey man, just playing with mine I just got. I'm surprised to hear a brushing sound from the belt that changes with the speed setting. It's more noticeable at slow speeds. It's not loud or anything but in a silent room you definitely hear it. Does yours also do that? I think I faintly hear it in the video but not sure.

Thanks for the simple demo of the new bracket! I have a residential ceiling height and want a low profile hair light. This mount looks to be the best option. My only remaining concern is fan noise on the F22x. But may give it a go.

What happened to the backup? I own the Rode Wireless Go II.

Thanks for the video 👍🏻

Good comparison and presentation .. this is the FL prime that is beckoning me for my old 5D IV set up. I have good Canon and Zeiss wide angle prime lenses and this one I should get. Canon it will be for the colours, just looks more right. Cheers, nice one.

Did you have any issues with the calibration? I just got mine and when I turn it on, the calibration squeals the motor and vibrates the belt.

you stated using the 1+2 on a single output works quite well.. how does it work when you use the zoom sound recorder into the c70 ? what cables are u using from the zoom into the c70 and what cables are you using from the zoom into the diety theos receiver ?

I was looking for vids about using RS3 pro with sliders and here you are with the exact slider I had in mind. I guess this is the poor man's motion control. I've been wanting a slider for a while and a change in my business focus might justify finally getting one, but I was wondering if I could pair it with the gimbal like here and achieve repeatable movements, or would I need something like the Zeapon with Pan/Tilt head for that (or is there another alternative I'm not thinking of).

Sir I'm going to begin my career in photography and I'm from India and think to purchase new camera as canon rp with samyang 85mm 1.8 or 1.4

Thanks, this is great. Currently assesing a job offer of 3 day per week pro-rata or freelance at a higher rate. Great video helpful to break down the details to work out how to know which is best for my situation and blend of work, freedom, security.

Great video. I've got the same problem setting up Theos with FX3 or A7S3+K3M audio unit. Line level is way too low. And mic level brings tons of noise because I have to crank up the gain so much on the TX.

do you have any thoughts on the actual transmitter / receiver system quality? I already have the sanken cos 11d and a couple of sets of sennheiser g4 wireless packs.. just wondering if you have found any quality difference between this and the rode go pro packs? (not taking into consideration the 32 bit float - just purely the quality of audio it sends into the camera)

Do they offer an option with a curved spigot part?

Can it be powered by a seperate power bank ? od must you use a battery fitted

just a suggestion, it might be silly but it may good to have the current price (not on special) of each mic so we know if its worth it.

Fire 3 shots and put them together in Adobe. Much better.

The next camera is gonna be the C70 but full frame. Can't wait

Mine should arrive Friday. Thanks for showing me what I’ll be doing this week!

Appreciate this comparison, the Cos 11 are workhorse labs and built to last, they can really take a beating. The difference seems small but the clarity and punchiness are big improvements for me, If placing a lab the difference sounds similar to a burried mic vs one that has some 'air' to it and much more desirable. I'm sure some EQ could reduce those muddier tones in the Rode Lav but bang for buck if audio is your thing, the Sunken Cos 11 is a no brainer. I really wished the Rode wireless pro TX's provided enough power for my DPA 6060's but the Cos 11 is a great mic and mic nicer to hide because of the smaller form factor despite the thicker cable.

Hi, Will it work on DJI RS3 Gimbal? 😊

This is way better than the setup instructions they included. Thank you!

Se ti avvicini troppo è normale che non mette a fuoco!!!

Can you do a dolly zoom ( vertigo shot) on this slider ?

Thanks!

I have found with the small rig cage because of the flex and no lock River on the right side/shooting button side after a day of taking pictures due to wiggle and flex squeezing that grip the cage can become lose and you have to ret tighten the base

I have the Rode Wireless Pro at the moment and I find the Lav II to be ok, but if you want to hide the mic under clothing I find it pretty tricky. Have you tried that? I will likely buy a Sanken in the future but in the meantime would be good to hear any tips if you've every tried to hide the Rode Lav II.

Does anyone know for Canon version the high speed sync which use to have an issue with older version, does pro version fix the issue wil lthe high speed sync work with TTL now? Connecting the Godox V1 Pro to canon camera especially to mirrorless R series camera, if high-speed sync and TTL combine effectively to achieve the correct exposure?

There's no need to chase the latest versions of everything, skipping as many generations as you can get away with is the smart way. Purchase something when you know you're gonna need it, if you don't need it right now maybe wait for the newest models to come out if the current ones are due a refresh, but otherwise just get the gear you need when you need it.. As for the adjustment on the RS3 pro I agree the lateral one is a weak point and feels strangely low-tech compared to the other ones. It requires a strong but precise grip but eh, it's a mild inconvenience at worst, I'll be sticking with mine for many more years I'm sure, or until it breaks.

I currently run with the Sony FX30. I've been looking at the C70 for a while as a possible upgrade. I am looking at other cameras/brands as well. But, the C70 has a lot of great features for the price.

DJI seems to have dropped the RS4 right now :)

I'm sure the giant Aputure bag is for your light assistant !! Imagine how easy it would be to bring them on a shoot ! :D Just roll'em in, jump out and get going within minutes of unfolding their legs 🙈

What about LUTs? Did you install custom? I had facing with program and Program ID. I should to send it ID to manufacture, that they to send me key for use program and install LUTs.

What body did you use? And is the lens EF or RF?

Are theese wheels compatible with any brand, or Just the neewer c stands? Thank you 😊