Відео

Mine starts but it starts to smell like something is burning and then it shuts off. The breaker isn't tripping so I know it's not electrical at the outlet. I took it apart to what I could and then put everything back.

Great video man. Helped me out tremendously. I could not figure out how to open the top to get to the belt. Job is complete because this awesome video. Thanks!!!!!

My control unit is attached to the lid and I cant figure out how to get the dern thing off

Perfect! Thank you so much. And I found the source of the awful noise. Little rare earth magnets and a wood screw stuck to the drums edge. A bit of cleaning and it's good as new. Thank you for your wonderful instructions

Thank you. You just saved me a few hundred dollars just to replace one baffle. Appreciate you!

I never would have figured this out. Thank you!!!

Thanks for this helpful video!!

Having a transmission and drive shaft connect to the tub is a very poor overcomplicated design of a washing machine. The belt should simply attach to the tub itself. Whirlpool owns 70% of the appliance market and every appliance is now made in Mexico at the same manufacturing plant. The insides are identical with the outer frame and badge being all that is different. Sometimes the board and buttons are different in their location, but operation of the machines are the same. Just fyi. And Mexico is not known for having a High Quality Control of their manufacturing processes. Only U.S. washers and dryers - Speed Queen. Well worth the money.

How do I remove belt without breaking it

Thank you!

This looks just like my dryer, belt went and called a company sent a young guy who really knows nothing about the older machines only been doing this since last August, anyway he couldnt finish cuz he was getting agro so he will be back tomorrow around 5pm, grrrrrr.. He put it back together we tried it barrel not turning with new belt but I could mover with my hand before, he didnt put the hook things back on, Im disgusted

Thank you for making and posting this. It's clear and paced just right. Thanks for mentioning your other video for lifting the console panel held in place differently on other models of Kenmore dryers.

I have a Kenmore series 80, and aside from a few extra screws holding on the vent cover this worked perfectly, great video :)

THANKS!!!

I had a pair Maytag Atlantis washer and dryer, had them 22 years washer went last year trying to find a replacement washer has been bs, Iv gone through 5 now, water level is crap or they making knocking noises like they are gonna explode or shake like they are going to take off, finally though I found a good one till I find out I cant reach the flipping cloths and the cold water button doesn't work. Now my dryer decided to stop turning on my last load of clothes, ugh. So hope this is it because I had a simple repair on it one other time, 350$$$$$$$$$$$ wont do that again, just buy a new one, THEY DONT MAKE ANYTHING LIKE THYE USED TO!!!!!!

Thanks. Was way better than buying a new dryer

Thank you for the tutorial. I saved my folks a service call with a replacement of a thermal fuse. I will also replace the timer soon as well as ours is worn out.

Thanks for the tutorial. There was a loud tick every revolution of the drum . I thought something was slapping the side of the body of the dryer. When opened, thanks to you, I found that one of the screws ,that hold the “paddles” that are on the inside of the drum, backed itself out almost an inch and was now hitting the inside of the side of the body of the dryer.

I need your help. I am up here in communist Canada and my Kenmore 90 series dryer is not starting. I first checked the circuit breaker and it’s fine. I noticed the door switch was no longing clicking and just dangling and the light in dryer would not come on when I opened it. So I replaced it. Dryer still would not start. I tested the thermal fuse with multimeter and it was unclear so I replaced it and still the dryer would not start. I tested the start button and it is working. Is it fair to assume the terminal/electrical port is fine bc the light comes in when I open the door so there is power to the dryer? What else could it be? Help

Thank you very much. This made a very scary job easy as can be. I had an air pod that got jammed in the blower of my Maytag Neptune dryer. This video made it a simple job that took less than 30 minutes.

very helpful! thank you, Ken!

Do you have a video on how to put the dryer back together? I had a friend helping me with my dryer deep clean and we can't get the felt back in correctly so the drum isn't lining up correctly. Any suggestions on how to get it all back together properly?

Thank very good.

Very useful - thx.

Excellent video

Thanks for the video just finished fixed the washer machine with same problem ❤🎉😊

GOD BLESS YOU FOR HELPING PEOPLE WITH YOUR KNOLAGE.

This helped me greatly, thanks for taking your time to show people properly. Most folks are scared to death to touch one.

Thanx for taking the tine to make this teaching video. If I would add anything, it would be a reassembly video. The fact that the 2 front pieces with the wiring are separate pieces caused me a little trouble during the reassembly. That way, you could add some points about how to handle the drum and tucking the padding in properly. However, it was still an excellent video and I am very grateful.

They sure made the older Kenmore's better and easier to work at.

Hey Ken! Is there a video on replacing the door switch? Is it a similar first few steps. Thanks for your help!

That was excellent for a how-to video. The camera position was perfect for me to understand what was going on. I now feel confident to take mine apart.

tHANK YOU i NEED TO Replace the ribs Looks like I can handle that

Beautiful video mann. You seriously made this handyman job easier

Thank you very much I don't understand why they make it so complicated. All I need to do is WD40 the drum I don't see why there isn't an easy panel for access

That was a great help, thank you. My Motherinlaws dryer stopped working but had power and wouldn't start it wound up being the belt had broke.

Awesome video and was super helpful for me. Question: after reassembly my dryer actually doesn’t seem as efficient with its drying. I cleaned out layers of built up lint and thought my dryer would be better than before. Is there something I could have messed up during reassembly?

Thank you very much for posting this! It was spot on.

Thank you so much!! Excellent work explaining how to work on these machines!!

Thank you so much!! This was exactly what I needed

Thank you for this video. The pulley part was especially helpful!!

Appreciate it thanks

Very nice! Don’t know how far I’ll end up having to take mine apart but we will see. Hopefully I’ve gotten enough gunk out of the lint and vent ducts that it will work… but may have to replace a few parts if that wasn’t enough. About to go put the lint trap back together now 🤞

Thanks for posting. I had one of the paddles in the dryer fall off. With your help I had it back together in less than 20 minutes! Many thanks.

Thank you so much for your video It enabled me to fix one of the paddles on my dryer. Great Job. Sorry, I do not have Paypal. I don't trust them. How about adding buy me a coffee link or something so that more people can show their appreciation.

Thankyou. Needed to access my belt. Insides needed some TLC with the shop vac. Very thorough instructions. Exactly what I needed.

Hi Ken, is it necessary to release the drum belt just to get at the fan. I dropped part of a screw driver and it fell in there...

My Neptune doesn’t spin I opened it up and the belt is there just makes like a pinnnnnnnggggggg sound and stars smelling like heat burning what can it be ?

Apologies for commenting on such an old video, but what exactly is the yellow/red wire and green/light green ground wire that you run into when pulling the door panel off? Mine is missing the entire metal strip and spade in the inside of the of the lint trap for that yellow/red wire to connect to yet it has the wire for it

My wife dropped her engagement ring into the lint trap, and it fell all the way down. This video was super helpful, I had to use needlenose pliers to pick it between the fan blades on the bottom. Thank you!