Відео

Great video and love my Olight baldr s ✅👀

can you send the link for the lakeline llc adapter you used for your romeo 0? thanks.

I’m not going to lie Removing the muzzle device has been a pain. Feels like I have to take it in to gunsmith. My vice wood support cracked attempting to remove this Ridiculous how they went from a simple thread protector to now this

The sound effects are hilarious

Looks like a 3 moa trigger pull.

Good stuff, ive been doin bear creek uppers and psa lowers for several years traditional and side charging uppers. Theyve been awesome, im actually buildin out a rig now, just waitin on parts to get here but its gonna be a 24 inch side charging 5.56 upper on a psa a2 fixed stock lower. Buildin out something like an rpk at home if you will, or American rpk. Ive had extremely good luck with all the rigs ive build usin these brands and have put alot of meat in the freezer with em.

Want some of my fudge?

I've done three builds with Anderson stripped lowers and BCA uppers and all are great. More recently I have done two "clone" builds (M16A2 and M4A1) with PSA stripped lowers marked as such and Luth AR barrels (not complete uppers). I am even more satisfied with those! They are consistently more accurate. Though they ended up costing more to build, but still well under $1000. Well under. But the combo of PSA and BCA is a good one and very reasonably priced.

If it runs, it runs! I've got a Colt M4 and a few PSA and Bear Creek Arsenal products and they all run great. All are accurate. For me, I just can't justify spending $3500 on an AR, I'll save the $3000 for ammo or reloading supplies.

I purchased a 7.62x39 upper from BCA sub $200. I bought the Blem PSA lower for $109. $309 plus shipping and FFL on the lower. ~$340 total. BSA upper arrived in 3 days. After several hundred rounds I am thinking "why would someone NOT want to do it this way?". It's shooting 2 MOA groups at 100 yards with a cheap Amazon scope and crappy steel cased ammo. I did buy four boxes of brass soft points that I will use on hogs. Because I bought it from BCA, they send me offers constantly on other caliber uppers, most sub $200. This one has worked so well that I will eventually purchase another 5.56 upper for the PSA lower and maybe a .300 Blackout upper for my 5.56 M&P (which was $600 BTW). Two functional, reliable rifles for the price of one.....sounds like a no brainer.

Pmc will shoot moa from out Howa 1500.......very different twist in your barrel. Your twist is made for your handload bullet weight. You are way out of your twist rate dude. I have a 22-250 with an 8 twist that will shoot 1" groups with 90 gr bullets, but shoots 55gr same as your gun does.......it's all about twist VS bullet weight. Study up and the light bulb will come on, promise.

I have a PSA stripped lower on the way. I'm on a fixed income and building my first AR. The piecemeal way my situation requires reminds me of the Johnny Cash song "One piece at a time" 😂. Thanks for the video and keep shooting.

I am curious why the psa and not bca lower

Fee oh key

Remember guys “don’t jerk it.”

Youre real shakey in the shooting portion. Eat a meal before you hit the range.

Good point and perspective on the lower cost brands. I have two PSA AR15's. I bought the first and built the second. AND I get a lot of crap on the interwebs for them. But, like you, I can't see spending so much extra coin to get a "better" name brand. I think people like to shame others, to self justify what they spent on their machines. Plus internet keyboard jockeys just like to be Dbags for fun. In any case, I came to this video, because I am doing a BCA 300 blackout 10.5" upper, on a lower cost lower. Not using PSA lower due to cost +transfer fee, so just using a local FL manufacture lower since it works out less exoensive. I will be testing out the BCA upper on one of my other rifles PSA lowers first. Fingers crossed it runs. Thanks for posting your video.

All right somebody help me out here..... I continue to see conflicting videos. On some it's a perfect match and you're good to go and then there's others where it doesn't fit. I wish there was just a solid ONE answer.🤷🤦

I too share your point of view ! I have six of these combos and love them, I’ve never had any major issues with these combinations. I could have spent the same amount of money on just one high dollar rifle. But I wouldn’t have 3 separate calibers either. Great video !

Got a Magpul PSA complete lower for $99.00 and a bca upper nitrided mid length 1 in 8 twist barrel mlok 15" handguard $299.00 love them paired together.

From my PSA 11.5" 1/7 nitride the PMC 55gr hpbt is just over MOA at 100 yds. From my PSA A2 20" 1/7 chrome lined it's MOA at 100 yds. From my girlfriend's no name carbine 1/8 it's about 2.25 MOA. The A2 shoots the longer, heavier stuff well too, but I'm sticking with the 55gr. It's consistent.

Once the trigger has broken, hold. Pull with slow increasing preasure, when the rifle fires, hold. Do not release the trigger, hold. When all has settled, then you release the trigger. A folding chair, a small folding table and an inexpensice rest, will also help you achieve greater consistency in your shooting position, hence greater accuracy. Dave & The Girls

Let's you buy 2 for the price of any other

This is common when firing out of a 1:7 twist barrel. Go 1:8 or 1:9 twist and get better results...i personally use pmc bronze on both 8 and 9 twist producing 1 to 1.5 moa.. got rid of my 1:7 twist ar been happy ever since

What psa lowers pair to the bca uppers?

Why does every video have BCA upper and PSA lower? Why is it not the other way around? Why not buy upper and lower from same company since they are virtually the same price? Can you answer these questions?

that guy shooting has definitely a hyper thyroid going on here haha

I shoot the PMC Bronze a lot. I notice some of my groups open up according to cold or warm bore. I group moa or less with a cold barrel and notice stringing as they warm up. Never do I get that garbage you had for a spread. When your man was shooting, he jerked the trigger and shot pretty fast for a guy that wants to concentrate on accuracy. That being said he did the trigger jerk on the loads but his group was right in there, but he did shoot slower too. All my guns hate 77 gr Sierra. PMC 55 eats its lunch. All my barrels are 1:8, 16, 18, 20" and they all like 52 to 55 gr. go figure.

Fun video, Good advice! Getting a 458 SOCOM For the Dog-man here in Texas. Stay Safe LOL!

Dude, my service issue AR had tons of slop between upper and lower.

Bca has great customer service I can vouch

Great video man. Kinda looking into a second AR and was looking at Bear Creek. I thought it might be junk due to the lpw price but was surprised to see some of the results people have had as far as accuracy and function.

Why not buy the combo from either BCA or PSA, and not mix them? Seems you might get better results . . .

Thank you I'm getting one!

I hate the ridges on the trigger it fucked my finger up

Fuggit stag upper bca lower for me

What magazines are you running for this?

I also buy PSA lowers and bear creek uppers. Very impressed.

Great minds think alike. Modularity of the AR15 is a wonderful thing and makes it great for custom set-up even with a complete AR15 purchase or a build. Grips, optics, sites, are a personal choice so it makes sense to build one the way you want it Vs buying a complete AR15 and changing and removing most of the parts, usually the standard ones that we don't like furniture, or installing a Ambi-safety save your money learn how to work on the platform and become very proficient at troubleshooting and maintenance...

South Carolina PSA lower with a North Carolina upper

Hi new to guns here. Are you using two brands cause they’re cheaper respectively? As in PSA has cheapest lowers and BCA has cheapest uppers?

I’d like to see a close up of the primer to see the flatness of the fired primer.

Their customer service has improved greatly. I had a fit problem between my PSA lower and my BCA upper (the rear take down pin wouldn’t seat) and they took it right back and sent me a new one that fit like a very snug glove.

Seems like with the pmc he is jerking the trigger a little more than with the hand loads. That plus not being sighted in with that ammo is more than likely the reason the pmc isn’t performing like you thought. I’d try a slower trigger pull and hold the trigger back and slowly let it forward and hold on the reset. You’ll get a more accurate representation of accuracy. Still the hand loads being higher grains will and should outperform the 55 grain pmc

👍

Will bca work with my ati omni lower

This video is couple years old and is 100% in line with how I think. I have two complete ARs for cheaper than the price of one high end one. Use the extra savings to upgrade parts over time. I also check everything on the rifle when I get it. PSA and BCA for the win!

I wonder how bad my 147 gold dot projectiles would do loaded in 350 legend lol

I don’t think it makes a huge difference. Your hold could’ve been better on the tighter groups.