Відео

If it is blue or pink, you are good to go!

@@SamhainPropworks Thank you for your prompt response! Can't wait to give this a go!

Your colour is 100% up to you based on the paints you go with. Experiment on a small piece and have fun!

I tried the link and it seems to still work. I have actually seen people download it recently, so I'm confident the link still works. Let me know if you can't sort it out :)

@@SamhainPropworks maybe my VPN is playing havoc - I'll turn it off and try again! thanks for responding

If there is any burning, it adds character to the final piece as it becomes shading, and extra aging. The tea stain/vinegar mix brings the wood to a colour that matches any burn marks perfectly!

Thank you! This is one of my favourite props, it just takes up so much room! lol. Thanks for watching!

It is a classic prop and one of the easiest to put together. Let me know if you need any help!

I’m glad you liked the technique!

I'm sure you can finish it however you want, I'm not sure how it will do with weather cycles though. The best thing to do is test it, and let me know how it works out!

The masking tape will put up with some outdoor usage, as it already has a bit of a waxy texture to it. A polyurethane coating might make it that much more resilient. If you wanted to really seal it? Grab a tube of clear silicone and gloves and use it to put a thin coat over the whole thing, I have not tried it personally, but if I was going to attempt it, that would be my attempt! lol. Thanks for watching!

Please email me and I’ll get you a link! I had to take it down saddly.

Welcome to my little corner of the internet! If you are already a woodworker moving to foam will be so easy, it's like working with the softest wood ever! The foam is 1" XPS Styrofoam, you can buy it in sheets at almost any hardware store (Look at the insulation area). Good luck in your adventures! I love building in wood and you will find a ton of plans and tutorials for wood projects here too.

@@SamhainPropworks Thank you so much for your response! ok that’s what I thought because I use some under my track saw but didn’t know if it was the same thing. Ok so you’re just peeling the layers of paper off to use the foam found in the insulation area of the orange or blue store?

No, the paper covered stuff is more specialized, you should be able to find it in pink and blue just as raw foam. Just check out the sites for those orange and blue stores and search "XPS Rigid Foam Board Insulation". Hopefully that gets you to the right stuff.

@@SamhainPropworks oh wonderful thanks again so much for your response!!!!

I checked the link, and it seems to be working. I have had several people already download the plan from my site. Let me know if you can't get it working and drop me an email.

@@SamhainPropworks It mustn't like Microsoft Edge because it's still saying "file not found-go to shop"

Happy to share! I love how they turned out!

This vine now lines in the corner of my daughter's room and she loves it! The only problem is she wants more for the rest of the room! Her room will look like the base of the beanstalk before you know it!

@@SamhainPropworks Yes!! Perfect!!😂💫

Airbrushing those leaves would definitely make them pop! You have to show me how they turn out if you do that!

Audrey 2 needs a friend! How about a giant Venus Flytrap?

I had so much fun with this project! I hope you give it a try!

Thank you!

I used a round over bit, but in reality anything that makes it look fancy will do! Have fun, the only one judging you is too far gone to complain about how their marker looks :) lol

@@SamhainPropworksI think my reply got lost, so trying a second one. Thanks for the info, sir! Second question, if you don’t mind too much. Did you buy the 2” x 6” lumber from the big box store (construction grade) wood? I was looking at Lowe’s and I don’t see anything that looked as nice as they looked in the video.

All my wood working videos are actually templated around using 2x6, 2x4 construction grade wood. It's a gamble always to find decent lumber, especially for projects. I'm the guy hunting through piles of lumber, checking warp, camber and surface to find the perfect boards. I feel your frustration with sometimes lumber being pretty junky.

The stain does not change the opacity of the material and any amount is tiny. I will admit, that I have not turned on that spider in years, but it lives inside for Halloween and I would most likely punt it into the great outdoors if I had to listen to the "Wooooooo wooooooo woooooo skitter skitter" sound more than 3 times a day! lol

Oh my gosh! I have been caught several times with a rogue too big staple in the staple gun

This in one of the first times I have had it happen as I use an air nailer and usually when I knock out one size of nails, they all come out. That last one must of had my number! Thanks for watching Cindy!

In the case of this torch the whole thing is built from EVA foam floor mats, I believe it 3/8". The pipe for the arm is sprinkler pipe but you can adapt to use almost anything. I normally don't list materials needed, as I usually state what is needed in the video as I go along, as I completely suggest to watch the whole video as many cases I change my mind on design later in the video from my idea at the start. In many cases, these videos record my first attempt at creating all these props. I may go back in some down time and list the materials needed on each video. Thanks for watching!

It was a spellbinding experience, I just had to cast caution to the wind and conjure the strangest thing from my mind! Thanks for watching Voodude!

Half the trees in my yard have yellow leaves already! Autumn is here! Now I am hoping winter holds off long enough so I can have a warm Halloween! It's wild to think in 15 days the decorations come out for another spooktacular season!!!

I thought I had! I will go dig up the original design and make sure to add it to the available files on the website! Thanks for catching that :)

Oh…also…we need three 5½ pieces, not 2 as the back of your hand shows 😂. 1 for the top, 1 for the bottom & 1 for the middle. Loving the build!!

Lol! My hand measurements have failed me, but you are correct. I believe in the pdf dimensions file I show the exact pieces needed (I hope). Regardless, thanks for the laugh and I am glad you are enjoying the build!

That is a good idea too! The proximity to always might cause some issue with lampposts and signs, but for prop locking in the yard it would be great! The 12' skeleton would love this! Thanks for sharing the idea!

Thanks Cindy! I had started this thing in a very different style. You never know where a prop is going to end up when you just go on a creation adventure! Thanks for watching :)

Today, the little gremlin inside me won, the thumbnail was the result! lol. Glad you enjoyed the lamppost video!

The Surprised ghost compels you. Though I am not quite sure why he is so surprised. The lamppost did turn out great, and cheap! I wonder what an entire path lined with them would look like! Thanks for watching :)

Random humour abounds here! Glad you found my channel and enjoy your stay!

It has held up really well too! What I did find was I did this same finish on a sabertooth cat skeleton that is outside, and within a year it almost completely disappeared. It was wild. Thanks for watching :)

Your words were touching JnCn and made me smile. The designing of these wheels was an adventure and I knew the people who ended up building them would have a passion for woodworking as the tools are a bit more specialized. On my website I designed the 24" and 36" versions of these wheels as well if you ever needed the alternate sizes. They very much are a lot of work, but the end result is just amazing. Regardless, when you finish your hearse I'd love to see the final product!

Pink is 100% fine! Enjoy your board making 😀

@@SamhainPropworks Awesome thank you and thank you for making the videos!

Thanks Fraidy! Been up to my eyeballs in an alternate project and only now I'm digging myself out of that one to get back into some good ol prop making. Thanks for visiting! :)

I have not build templates for these before. Half of these were made long before I had ever thought of a UA-cam channel! But you know, I can probably make some time to create a set of these! Thanks for Watching Scott.

I will 100% admit, the lamp post took a 180º turn from what I started designing it as, but the end result is awesome. I'm looking forward to sharing it! The best part is my concrete hard point is already poured! lol

I may or may not have swung it around in a scythe like manner when I was testing out the size and fit of the post... But yes, 100% the scythe thoughts were real. lol

Like vampyre village carnage carnival sinister circus werewolf woods bloodworth manor deadly desert beastly bog terroruko temple the headless horseman tavern witch hollow castle vampyre ghost central station ghastly graveyard

Deal! I just finished a sign post and realized that not everyone has the want/will to create these signs. I will put together a ton of different files for signs for a modest fee on my website in the future! I'll let you know here when I do.

Thanks Cornelrosca! I hope my tutorials entertain and inform, as I have a ton of fun making them. Thanks for watching and enjoying my certain style! lol.

Thanks LordHog! Glad you are enjoying my collection of random thoughts and props! If you are ever looking for something in particular, let me know! I'm always looking for inspiration for my next project :)