Hey man, I have this same drone, BUT I can't get the little bugger to connect to my receiver. It gives me all the proper tones when I plug it in (the three and then the other 2) so it seems to have bound, But it won't arm and I can't get any receiver in Beta flight. The VTX has a solid blue and 3 red blimks/ the boot button has steady red blinks. Any ideas??? I am useing frsky and it is telling me telemetry lost when I unplug so it seems to be connected, the sbus on the F/C is bridged.
Did you ever figure it out? My Darwin 79 came with Sbus bridged already so I had to use a solder wick to clean it and make it ibus bridged for a Flysky receiver. Then I couldn't get any stick movement in betaflight. So in the end I soldered the bridge back to sbus and found an sbus Flysky reciever and soldered to a separate ground, 5v, and signal to rx2 pad.
Hi all, i have connectd a Flisky Fli14+ into mainboard. I haVe conected the wires with the connectors included. To actívate isbus, i have soldered the two pad of the right . Ppm and ibus. Perfect.
I'm not familiar with that RX. But usually you're just needing to wire to three pins (5V, GND, and Signal). Channel 1 is likely the signal for iBus / PPM. That would go to your RX UART.
Thank you for your video it really helped me
SO HELPFUL
Thanks for saying so!
Great video so helpful
Happy to help! Let me know if you have any questions and I'll help any way I can.
thanks for the video! you just got another sub
If you soldered your receiver directly to the FC would you still need to bridge 2 of the 3 pads for ibus/ppm or sbus like you did?
Hey man, I have this same drone, BUT I can't get the little bugger to connect to my receiver. It gives me all the proper tones when I plug it in (the three and then the other 2) so it seems to have bound, But it won't arm and I can't get any receiver in Beta flight. The VTX has a solid blue and 3 red blimks/ the boot button has steady red blinks. Any ideas??? I am useing frsky and it is telling me telemetry lost when I unplug so it seems to be connected, the sbus on the F/C is bridged.
Did you ever figure it out? My Darwin 79 came with Sbus bridged already so I had to use a solder wick to clean it and make it ibus bridged for a Flysky receiver. Then I couldn't get any stick movement in betaflight. So in the end I soldered the bridge back to sbus and found an sbus Flysky reciever and soldered to a separate ground, 5v, and signal to rx2 pad.
Hi all, i have connectd a Flisky Fli14+ into mainboard. I haVe conected the wires with the connectors included.
To actívate isbus, i have soldered the two pad of the right . Ppm and ibus. Perfect.
@@Mrgalletikas I have the same setup. Its an awesome quad for the price for sure.
to make this bridge with center pad and ppm pad are you have ppm select in flysky transmiter?
You can do that or you can use a separate RX pad.
Hi, if i have to connect a Crossfire nano rx... what i have to do? The reciver has 4 cable... which one do i have to choose? Thanks
I'm not familiar with that RX. But usually you're just needing to wire to three pins (5V, GND, and Signal). Channel 1 is likely the signal for iBus / PPM. That would go to your RX UART.
Hola as probado que tal vuela?
Acabo de comprar uno sin saber si e echo buena compra
Que tal te fue? A mi me llegó hoy.
@@Mrgalletikas hola la verdad que muy bien pero de stock me daba algunos fallos
Pero ahora estoy volando con emiflight y va perfecto