Відео

Yes, you should be able to.

@CodeCraftersCorner how long the video results?

Hello, did you drag the ComfyUI_00002_.webp file into ComfyUI interface? I checked and it worked. Can you try with this method: 1. click on the ComfyUI_00002_.webp name on Github. 2. It will say something like cannot be viewed. 3. Click on view raw. 4. it will open the video. 5. drag it into comfyui. (no need to download it.)

Thank you so much!

Yes, I noticed that too. Maybe you can try to get the face with IPAdapter FaceID and then apply the style lora. I will have to try but it's just a thought.

Hello, i've updated the github repo with a workflow containing the upscaling process.

Thanks for sharing!

Thanks, I forgot to share that it takes 20 seconds for 20 steps on 4070 ti.

@@CodeCraftersCorner Total prompt execution takes about 20 seconds with 30 steps, Not quite 4 seconds but still very impressive. fp8 or fp16 makes no difference for me, both top out at 20Gb vram and same time. Using workflow i found in the Lightricks LTX page i got slightly better results and there is also a img to video workflow there. That being said the results they are showing seem to be very cherry picked and most of the time it will not be so good, good thing is that doing multiple tries will go very fast compared to Cogvideo or mochi.

​@@CodeCraftersCorner Oeh nice i will try 😏🙏

Hello can you try one of the followings: 1. replace the dinov2 with this: facebook/dinov2-base. you can click on the dino field and delete and type the above. the "base" can be changed to "small" or "large" depending on the VRAM available. 2. if the above does not work, you can try to delete the folder (instantir wrapper) from custom nodes foldder and install it from the ComfyUI manager instead.

Git must be installed, then it will shows.

@@oenice33613 Thanks man! it works

Glad this is resolved! Thanks @oenice33613!

Yes, there are a lot for developers to do when it comes to custom nodes compatibility.

Sorry to hear that. I am actually preparing for a new video on PuLID since a lot changed. In the meantime, when installing insightface, can you try the following: 1. copy the path to the insightface file (right click > copy as path) 2. go inside the python_embedded folder and type CMD in address bar. 3. in CMD, type in python.exe -m pip install "paste the full path to the insightface file here" 4. press Enter. since the error said invalid for the location, i think you need to have the full path to the insightface .whl file.

@@CodeCraftersCorner Thank you for your fast response and kind support - your channel is, indeed, one of my favorites in this matter :-) I can assure you that the file location is correct and the command sintax are ok: C:\ComfyUI\ComfyUI_windows_portable_3\python_embeded>python.exe -m pip install insightface-0.7.3-cp312-cp312-win_amd64.whl onnxruntime (I tried with and without "onnxruntime" and change the location of the .whl file from "python_embeded" to the ComfyUI root directory resulting in the same output) ---- I also tried "pip install insightface" and the error is still related with thw wheel itself: [!] Building wheel for insightface (pyproject.toml) did not run successfully. [!] exit code: 1 [!] [!] [213 lines of output] And there´s some info on this trial: [!] C:\ComfyUI\ComfyUI_windows_portable_2\python_embeded\Lib\site-packages\setuptools\command\build_py.py:212: _Warning: Package 'insightface.thirdparty.face3d.mesh.cython' is absent from the `packages` configuration. [!] C:\ComfyUI\ComfyUI_windows_portable_2\python_embeded\Lib\site-packages\setuptools\command\build_py.py:212: _Warning: Package 'insightface.data.images' is absent from the `packages` configuration. [!] C:\ComfyUI\ComfyUI_windows_portable_2\python_embeded\Lib\site-packages\setuptools\command\build_py.py:212: _Warning: Package 'insightface.data.objects' is absent from the `packages` configuration. (error: Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": visualstudio.microsoft.com/visual-cpp-build-tools/) ---- One more time, thank you!

Yes, right now, compatibility with custom nodes is quite bad.

Thanks for sharing your experience! You are right! They have a lot to improve with this. It might stay in beta for quite a while. There also very low custom nodes compatibility right now.

@@CodeCraftersCorner Yea. BTW: I can install xformers there manually. But still this peek over my VRAM kills the generation time. But i guess it has potential after more optimising and bug fixes. Ps. It also forced me to reinstall like 3 times after I got info about new version and then something crashed and it needs to reinstall :). It was also a pain as you need to delete one folder as it does not want to reinstall on existing:). But it is beta after all :).

There are no confirmed release date so far, unfortunately. It's on an invitation basis for people to test out and report on bugs for now.

Thanks for sharing your feedback! I can understand not having access to the terminal and there seems to be some compatibility issues.

If this is implemented properly, I think it will be better than pinokio since this app is being developed by the ComfyUI developers.

@@CodeCraftersCorner What does "marked answer" mean? Is it not allowed to mention other tools? Then delete it :)

@@ChrissyAiven I not sure what this "marked answer" is. I have replied to the previous comment. Are you perhaps not able to read my replies? "If this is implemented properly, I think it will be better than pinokio since this app is being developed by the ComfyUI developers." Hope you can see this reply. No, there are no restriction to talking about other tools here.

@@CodeCraftersCorner Yes I was able to read it, I saw that on another comment of mine which then was deleted, maybe some youtube filter? 😅

Thanks for sharing your experience! There does seems to be some compatibility issues.

Hello, right now, when it comes to generating 512 by 512 images, you can get by with a 3GB VRAM card (including laptops). Although it is not recommended, ComfyUI will work on CPU only if you don't have a GPU.

@CodeCraftersCorner thankyou ❤️

Great! I noticed it loads faster than my portable version.

Yes i agree, i have about 5 versions of ComfyUI portable installed with different versions to not break old worksflow. Wonder if that will still be possible with this app. And btw i really hate this new UI they introduced recently, half the time the queue button disappear and i have hard time finding old functions like clear workflow.

Thanks for the feedback. I think they are making it easier for more people to get into ComfyUI. Since the portable version is Windows only, this new app is for both Windows and MacOS. It also comes with the manager already installed.

@@xcom9648 Yes, you can have multiple version of the app by installing it multiple times at different locations. Oh! I noticed the disappearing queue button too. It happens when i resize my browser to a small window and maximizes it again.

@@CodeCraftersCorner I always feel sorry for people who got scammed in to buying apple 😄😄

Thanks for the feedback! I agree that they are heading in a good direction with this.

Thanks for watching so fast!

Thank you!

Hello, this video is for the SDXL pulid. Are you perhaps referring to the Flux version? I have not made a video for that yet.

@@CodeCraftersCorner Ah! So many things to look at in Comfyui! Thanks. I'm operating both XL and Flux so I'll be looking for the Flux video.

Hello, It is next to the stop button, where the queue button is.

Thanks.

Thanks

Hello, there are two versions: one for sdxl and one for flux. The video is for the sdxl version. I will make an up-to-date version soon.

@CodeCraftersCorner ok ty

Thank you!

I think the insightface is no longer compatible. I will see if I can make an up to date video with a new insightface version.

@@CodeCraftersCorner Thank you for the reply. I have already resolved this from another vedio. I think maybe you are inetrested in it. This is the URL:ua-cam.com/video/Uls_jXy9RuU/v-deo.html and it is at the 19:29.

@@kana-ci1qr Thank you for sharing!

Hello, in the terminal (CMD / Powershell) window, it will give you an error as to why the import is failing.

Thank you!

Hello, can you try to go to settings > search for link render > can change it to spline. Then restart comfyui and click on the fit to view button. Can you try this and see if that does the trick?

@@CodeCraftersCorner Thanks for the reply!

Thanks for watching!

Thanks, I think that's a great idea. I will see what I can do.

Hello, I think supir may be slightly better.

@@CodeCraftersCorner thanks!

Yes, same here. Hope it gets fixed before it becomes official.

Same for me, unfortunately this makes it as tedious as normal reroutes...

Thanks for watching!

Thanks for sharing!

Hello, the “press any key to continue” only shows up when ComfyUI updates and it asked to press a key to close the terminal. You can try to check the ".bat" file you use to start comfyui and remove the line that says update. You will have to manually update comfyui afterwards by running the "update.bat" file.

Thanks for watching!

Of course, no longer I won't be doing that, thanks for pointing out that reroute, when I started using comfy I first clicked those points on curve expecting them to work like typical splines :)

Thanks for sharing. Yes, once they fix the bug, I think it will be faster to add the reroute points with Alt + clicking (dragging).