Відео

Many thanks 🙏. You solved the problem 🎉 We are just about to go away and had thought that we would be going without a working toilet 😢

Super grateful for this video, thank you!

Thanks mate.

Thanks Gerard, looks like I'll be tackling that this weekend :)

Good information! Cheers cobba

Literally same thing! Jammed pump! You sir are an absolute saint!

What could have happened to the arms while replacing roof. The 2 nd and 3rd arm doesn’t rise by itself causing roof not to rise completely.

Thanks for this invaluable info 😊😃

Very useful. Saved our camping trip .

Glad I watched your video,I have noticed today one eyebolt was opened a bit in my 2006 Jayco , Jay series pu,the cable was a little loose so I tighten it a bit,wondering what caused the eye bolt to open in the first place,hope its not a warning that the cable is going to snap!Very informative vid

That’s exactly what was wrong with mine! Thank you a thousand times over. This is the only video on UA-cam I could find actually showing somebody fixing this.

Should those poles be lubricated ? 😊

Thanks mate. I'd also just like to add that you make sure the hose is seated back properly up the top otherwise your flush will spray upwards right out of the bowl like it did to me 😂

Thank you so much!!

Thanks for that very informative video most helpful .

Rido" thanks mate good info

I need to adjust the door side up 25 mm. When the green cables are tight I still cannot push the door so it locks into place. Do you have any ideas on adjusting one side cables only.

How do I stop the cable from catching in between the pulley & the metal bracket?

Absolute legend!🙏

Question for you. I haven’t had my Jawa for all that long and already thinking hard of giving the stock agm’s the flick and going to lithium. Does the 200A supply enough juice for you. I don’t run anything over the top but am thinking of maybe putting in a couple of 120A batteries. I’m planning on taking long service leave and going away for 3-4 months. Just wondering what you think of my battery choice. Enjoying your videos, a no BS approach.

Great video but confirms I’m ready to sell Cheers from Sydney

Hey Gerard I have a 2007 jayco jay series 1007 how high does my roof need to be when it’s fully up? I don’t have a indicator cable on it wasn’t one on it when I bought it

So glad I found this I have twisted cables. So once I get the tension off I will be able to spin plate to untwist the cables?

Good review/chat and nice to hear that JAWA are responsive to defects and modifications etc. There are some nice updated products from JAWA which is worth checking out for any prospective hybrid buyers.

Great work good video on that and easy to understand it

For a new Sirocco owner, picked up in August, very informative Tks👍

Yeah I’ve used them for a couple of years now, great product 👍

Just a question. After 3 years of kilometres, how did the suspension and bearings hold up? Have you had to replace them or just a grease and check (mainly the bearings). Happy travels

Good honest review. We have just bought a new Jawa and have used it twice. Good to hear a review after 3 years of travelling. Thanks👍

When we bought our Jayco Eagle through a private sale, we were told by the seller that we had to walk around as we were winding up to make sure all of the lower sleeves were pulled all the way down and to never let them go up till the inner/upper sleeves had maxed out 🤦‍♂️ Only when I had a tube pop out and I researched did I find the complete opposite is true.

Hopefully those eye bolts will snap or just open up before a cable breaks. I’ve snapped two eyebolts and replaced 3 others over the years when the eyes opened up. Always keep a spare set of eye bolts. Note: you will have to open the eyes a little otherwise the looped cable end won’t be able to be attached.

Great video mate well done , I haven't changed bearings before but I'm gonna give it ago. Cheers swany

3:58 You don’t need to put the axle nut back on to remove the hub you just gently wiggle it until it’s free, if the seal comes off during that it means it’s buggered

thanks for t omce again he video, fixed our problem although i pulled the outlet out took about 3 minutes to re-install, once again thank you saved me a repair bill.

I did pop out the life arm at about 1/2 way up. Got the spring back in the lifting arm. But arm doesn't want to go back in. Suggestions?

Extremely clear guidance and very useful it solved the problem which was sticking circular valve once freed works perfectly thank you so much

Nice one. Loving the van and can’t wait to order.

Great advice, thanks.

What modell is the hilux ?

Thank you so much for your video. It fixed our problem. 😊

Nice vid, thanks. Thanks for talking about the backing plate or maybe they’re shims. No grease?

Damn helpful! Thanks, if 3 of the cables are wound over each other that would cause issue too wouldn't it? I purchased a used Coromal (similar lift system) and looks like a cables been replaced but other 3 are bound over each other. I've already had to fix main cable as it was stuck on the outside of the winch 🤦 It goes up n down now but it's a tough wind up. There's not enough info around for these lift systems, thanks for posting! Would you suggest inox or grease to lubricate pulleys and winch?

Just what I need to know how to do. Cheers mate 👍

How often should I do this? I'm buying one that's only a few years old

Thanks for the video. It helped me understand how to get to the pump and how to eliminate issues. My pump will not turn off once the main circuit switch is turned on. Any advise?

GOOD JOB THNKS SO MUCH....DO YOU SHOW HOW TO DO AN OIL CHANGE AND FILTER CHANGE ON THIS ALSO GERARD? MY BRAKES HAVE ALWAYS SQUEELED AND BEEN EMBARRASSING. TOYOTA KEPT TELLING ME IT WAS JUST BECAUSE I WAS NOT CARRYING ANY HEAVY LOADS. IT IS SO ANNOYING. I MIGHTJUST DO THIS TO SEE MYSELF IF IT HELPS. EVEN THOUGH THE PROBLEM WAS NEVER THAT I NEEDED NEW BRAKES. YOU MAKE IT LOOK SO EASY. SURELY A WOMAN CAN DO IT. I LOVE HOW YOU USED THE EXTRA SAFETY SO NOT TO GET CRUSHED UNDER IT. I HAVE A PAOR OF THE SAFETY BOOTS TOO SINCE A TRAILER FELL ON MY ANKLE 4 YEARS AGO I HAVE NEVER BEEN ABLE TO WEAR A SHOE SINCE

Great video thanks. I had some corrosion on the fuse and motor was jammed. Your tips fixed the problem! When trying to get the pump out I thought I had broken the connection into the bowl... the outlet fixed to the end if the pipe snaps into place with an orange. Pulling the nozzle out through the reservoir made getting pump putters easy. Thanks again.

Thanks for your explanation. My fuse simply has an E stamped on it. What rating does the flush require?

Great video How much did it cost 🤔

Still can't see the use of it Gerard. Just another thing what can go wrong on your dashboard. Been driving over nearly 50 years now and be towing much of the same in all that time. I think from memory that I had 2 flat tires and one on a motorbike but that was easy as that one had a compressor on board and plugs in the trunk. Maybe I'm bloody lucky.