Відео

Holy shit dude... I was just looking for some indication of what my second guitar was. I bought my banana yellow RGZ 211m (pyo2049 I can't ready shit else after that) sometime before 1991. Which I still have. YOU! My friend... Have WAY too much money and time on your hands. 😅

Still one of the most useful DCS videos in July 2024. MFD's are now usable and even provide an excellent picture. I had to use the Monitorian app (downloaded via the Microsoft app store, for free) to set the MFD displays to 100pc; they were at 44pc only originally for some unknown reason. Thanks a million Chris!

Hey Chris, would you have any interest in selling this?

Help. Where in the serial number is the year of manufacture on the rgx ??? Thanks in advance !

would you compare it to the yamaha's RGX line ?

Now do the front!

I've got that guitar in translucent red with the most flaminy curly maple top . It's beautiful it's the DC 400 but with the piezo fishman 2 point bridge . Has ebony fretboard without any inlays & stainless jumbo frets. The thing's a tone monster. Great playing BTW and a beautiful guitar you've got there.

How did you route the cable at the end of the video?

I don't have script folder help

My sim... ua-cam.com/video/7q_R2P5cxW4/v-deo.htmlsi=3Tuj4pbCWFI2je6w

I've been trying to find one of these lil things for years now, Kamen has had my heart for decades since the first one I owned was stolen <3

I can confirm this makes a huge difference. Literally from night to day. I hesitated, because I'm tired of modifying, editing and "fixing" stuff, but this time it really was worth the trouble. Like Nike says: Just do it.

I have a RGX121Z It’s ok but the fret ends are sharp.

Hi! Did you try reassembling springs and cams?

Excellent video on this tremolo...the most complicated bridge I have ever worked with. About 3 years ago I took one of mine apart, and sawed the arm coupling off with with a hacksaw, as the non original arm was sloppy and I decided to replace it with a push in OFR type. The hole in the baseplate worked fine with the OFR's diameter once that section of the block was removed. The other very odd thing about this bridge is that they are not all mounted with the same spacing for the posts....I have two. The Pacifica 921 I have is mounted at 80mm, the 1221 at 74mm and a floyd will drop right onto the 1221's posts and in the route....not so on the 921. If it's set at 80mm good luck finding a floyd that will fit in there. GE199T which has that flat knife edge for variable spacing is too big for the route.

Are the blinkers Green?

Thank god it is a free game. :)

I own an RGZ Custom purple guitar. Bought it new in 1994 in the UK. It took some setting up but it is a brilliant playing and sounding guitar. Only thing I changed was the Tremolo spring a year or so ago. Honestly I would never swap it for any other guitar. It sounds beautiful clean and with any effects too. It still looks brand new. You have a nice one there too Chris. Shame people don`t appreciate well played and crafted songs and music anymore for the most part. Commercial music today is absolutely dire trash in my opinion. I made and recorded my own to make up for the lack of good new music. I soon found out no-one else is really interested in retro sounding new music-even though it is totally original and totally professional sounding. Too bad, their loss not mine.

Thank you, hope you are still making videos, good job.

Is the contour switch on the amp the same as the foot switch

With those pedals and that foot switch give this amp same quality as the mark 4 worth $7000

Vtiwn rack mount foot switch is that what it is thank u

Can i ask what is the name of the switch with the contour i have the same amp this what i need now now now ha

Is it the white pedal giving the amp that fat tone or the contour pedal thank u

Great sounds

Great video .. I learned it can do by my own Thanks you

Have a close look at the Cubsim installation video/instructions… no need to disassemble your TPR.

Will fender strat aftermarket parts fit in this strat? (Pickguard, backplate, etc.) Ty!

Great job 👏

Yuo should have played it , and the camera fuzzy out of focus at times

Great video, full of unvaluable information, thank you so much. The first guitar I bought my self after working for months as a janitor in a music store for months was a RGZ321FP (same blue methalic color than yours). Man, I loved that guitar so much but then started my "normal guy life" and I sell it in 2001. Yesterday I found my guitar on sale in a local online marketplace, not a simlilar one, it is the one I sold! It has the same scratches and different volume and tone knobs I puted on then (I still have the originals). I was uncertain on bought it again, but no more doubts now.

Sweeter setup than I ever had! Here's a vid for you... ua-cam.com/users/shortsBbx5f2NIQ38?si=5npZXhiQhtgnbrn6 F-16 through the Norway fjords - fun!

i liked when your cat came in LOL!!

Hi Chris, I followed your instructions to the 'T' with zero photo editing experience, and I just wanted to say thank you so much. I will order a 3rd MFD thanks to you.

Hi I have a guitar identical to this model and was wondering how do you fix the bridge so that the low strings don’t keep hitting the fret board. I’ve never strung a Floyd Rose before or done a set up on a guitar and it’s made it a bit harder to do since it is a hard to find guitar. Do you have any tips for a newbie on how to set this thing up/ adjust the bridge properly? I think the back spring tension is pulling the bridge down lower than it should be. I don’t want to damage it on accident . Thanks!

Just happened into an RGZ 112P for $125 at an indoor flea market guitar vendor. Needs some lovings because it's pretty dirty and kinda sticky, but when I plugged it in, I knew. My dad's favorite (now last) guitar is a Yamaha classical, so when I got into it, I really wanted a Yamaha. My Squier Strat, SSS, just wasn't keeping up for some things due to the buzz and it gets muddy on chords. But having a guitar with a humbucker is quite nice. So looking forward to seeing how it feels and sounds in real playing

Thx for this. Hows the quality and durability of those 3d printed parts that attach to the pedals?

If I came into a first-generation Steinberger bass, one thing I would try to do in short order is have the headpiece upgraded to one from the Synapse line. There may be nothing wrong with double-ball end strings, but I’m kind of picky.

Really like your enthusiasm for yamaha rock guitars. I am lucky enough to own an RGX1212s with mahogany/maple five ply neck through construction and ebony fretboard that is an incredible playing guitar. Mine has the yamaha tuners and is indeed made in Taiwan but is excellent quality maybe even better than my Ibanez RG550 that was made in Japan. Thanks for pointing out that the "made in Taiwan " were excellent quality guitars too.

Thank you, this may be my issue as well. Definitely a design flaw. Went to a vacuum shop and they had said this may have been the problem.

Sounds fantastic

Thank you so much!!!!! I set everything up and it was not useable. The Target Pods and Mavricks just so disappointing. Reshading works perfect!!!!!!!! I can thank you enough

Omg, thank you!!!

I wish it was more complicated lul

Thank you so much

Great demo! It's refreshing to see you playing both chords and leads, which really showcases the tonal differences. Many demos focus solely on rhythm metal, making it hard to gauge the quality of the pickups. Good job, bro!

P0171/P0174 system lean, actually is you have a vacumm leak in the emission system. Make sure the vacumm hose is connected correctly their is a diagram on the hood. I fix my P0171/P0174 problem. O2 sensor will give you a specific code just for that.

Screw the pickguard down on a waste piece of mdf or similar. Should minimise the risk of flying pickguard and severed limbs 😉 Nice job btw

I happened upon one of these. I actually bought it for the hardshell case. I'm always in need of good cases. I own 80's Charvel's and Jackson's, a couple of USA fender Strats and so on. I really had no plans on keeping it until I played it for a while. Turns out I Loved it! I paid $100 for it in a real nice hard case. I just kind of fell into the deal and have been quite happy about it ever since. The guitar is one of the pure black ones with the ivory crazy stripes all over it and it's in really nice condition. Thanks for the informative video!

I've been using The Way, and I noticed they made an update that allows the F15E to work. I did that install and now, It seems like The Way is talking to DCS because when I go in game the header of the app displays the artwork of the module I'm using, however, when I go to F-10, I get no green dot when I go to start to make waypoints. It seems like the app is collecting waypoints, just no dot. Then, when I go to transfer to DCS, it does not do anything with the module. No action whatsoever... Any help is super appreciated!