Відео

Great video! Thanks

Mixing bowel 😂

👍

If tyou have vacuum pump you dont have to press on brake pedal. Just double job.

Awesome

This is a great video. I rarely use my mixer but the last time I used it, it was shaking and something is definitely off. I’m going to check all of these issues thanks to this very informative video. I will say that it seems s counterintuitive to loosen the screw to stop the head from shaking but I saw the fix with my own eyes, lol! Thanks!🤗🤗

The sidewalk is owned by the city so why are you worried about it?

THANKS! you were right! you helped me fix the warble and the slipping hinge pin.

That's not food grade, I don't think that's recommended

how do I know if my brushes need replacement ?

Thaank you so much! My wobbly head was overall fixed when I loosened the adjustment screw in the neck of the mixer. But I then found out that while doing so, my attachment height has increased and it doesn't quite "touch" the bottom anymore, leading to unmixed ingredients in the bottom. I know that adjustment screw is for adjusting the height of the beater, but now that I loosened it, the above problem occurs. The dime test doesn't pass. So, is there any way that I can fix this but at the same time the wobbly head also stays fine?

Ok Mike just spoke to a customer service from KitchenAid lovely lady, but not crazy about her advice. She claims that you can’t put more than seven ingredients in my KitchenAid meaning that if I have 5 cups of flour, I have to cut it back down to three or four and a total of seven ingredients. I’m sorry not having ingredients 7 cups. OK also she said that I should not go higher than speed too, when needing dough is not really good advice and this is not gonna be helpful because most of them you have to do it at least by three because it goes faster, but I will try the two and I’ll let you know what Happens but I just thought I’d update you on what was going on here and I thank you for all your help, I’m not sorry that I changed the plate. At least I know it’s new now and I do like the stainless steel hook that I bought so dough hook that is OK so have a great day and keep up the good work thank youbye-bye

Good morning Mike. Today is Friday December 20th. Making bread for the Christmas holiday. I have written before and did take your advice and changed the plate. Did not work. My bowl still locks. Did the dime test adjusted the head etc. I am on call for a call back from kitchen aid. Not liking their customer service. Keep switching me to another person. Anyway. I am considering purchasing another bowl. But truthfully they are so expensive. This is the second year for my Mixer. So it’s not old. And it has done this from the beginning. Oh sorry if it sounds like I’m complaining to you. But you did want an update. Have to say I had a farberware mixer and in my opinion it was much better than this mixer. Unfortunately my daughter lost it in the move. Ok thank you Mike for all your help. I will update on what kitchen aid tells me. Thank you again.

So there's mixed results because I wash restaurants with the wand and that area that you just cleaned I can do it in 2 minutes

How do you know when the brushes need to be changed?

Thank you! Finally a useful video. What I didn't get is, when do you replace the motor brushes? My mixer is overheating, haven't even used it that much. Now I started baking rolls and I am wondering if 6 c of flour is too much for this mixer to handle. The bowl size is a KSM 150.

The box opening was tortuous to watch 😂. Editing! Anyhoo, I have the same finder and it's amazing

Thanks for the video. I’m trying to determine if my vertical cutout at 16 3/16” is going to work. I see the manual states a minimum of 16 3/4”. Do you know how much vertical height you had in your cabinet cutout? I may need to notch out some additional height for the duct on top.

In the instructions it says to check the level of the microwave before installing the brackets and add shims under the bottom duct as necessary. Was your microwave already level before installing the brackets?

If you like woodworking just look for WoodPrix instructions

Excellent video

Oh my. I have been searching on the kitchen aid sight to fix this. Since I make bread of course I knead in my mixer. The bowl always gets stuck. Nit an easy fix for me have to wait for my son to come down and unlock. The sight said to do the “ dime test” Well that meant I had to adjust the height. Etc. did not work for the sticking. They suggested buying a new bowl. But I am old and so been around a while 😆. I thought well that’s an expensive purchase if not the trick. I thought about the plate and was going to see if and here you are suggesting that. Thank you so much. This will be my first purchase to try and fix this. By the way my bowl has done this from day one. My machine is only 2 years old. Think kitchen aid should have replaced it long ago. But of course they didn’t. Thank you. I will definitely invest in the plate.

Hi fellows. I think you need to take some time and take a fast tour on WoodPrix to learn how to make it.

How do you fix the wood where the springs are itself?

I tried using this pump kit to empty the reservoir tank.. for some reason it wasn’t working on me.. I don’t know if my pump kit has any issues or i did not use it correctly

Good video, great job! As you pull out fluid, where do you stop? At the "MIN" line on the container? If so, what happens if you go lower? I mean how lower before air goes into the system? I must be missing something on the concept of preventing air going in - in other words, what will be the difference of removing below the MIN? The fluid is already covering the entire brakes lines, right? After all, when a liquid is poured, air is ALWAYS displaced/removed (well, not 100%....with minute pocket of air being trapped in)

Uh...., you forgot the washer and nut that secures the arm to the guide pin.

Excellent video, helpful!

Thank you! I've been having problems with the pin slipping out from either side. I tightened that screw before over the past few years,but it didn't take long to loosen again. I've had bouncing and adjusted the screw. Sometimes the paddle was too low it seems. The biggest thing for me in which I'm excited about is the replacement motor brushes! I never knew about them. My mixer has been having a hard time going past number 6. It staggers and sounds strained. I am hoping it's the fix, because I have lots more baking to do. My mixer is 22 years old. I've never replaced any parts for it.

Are the brushes style different or standard size? My model is KSM150PSOB

You don’t have to take off the big plastic pan. Just the small one is fine. ( just did mine )

Wow I was worried when mine cracked, but you make it look so easy, and thankfully it’s a cheap fix too. Thanks!

WHAT?! YOU CAN FIX IT THAT EASILY?! Mine has been wobbling for like 2 years and the pin just started popping out this month (duct tape was my temporary fix). So glad I can just adjust two screws and be done. Thank you so much!!! <3 :D

You saved me at least 75 dollars to ship it back to factory service. The hinge pin set screw solved our problem. Happy wife, happy life! Thank you!

I’m about to reinforce my bed frame cuz it sucks. U think putting 2x4 is excessive?

Pocket holes, not pilot holes, are what you drill with a Craig jig.

Thank you for sharing here. I have marks on the side of my home on some very expensive pavers and not happy with PG&E. They should use tape on aesthetic private property. Save the paint for streets and dirt.

Thanks so much I will take a look at both. Manual & under the car 😊

Hi I loved ur tutorial. I was wondering would under car arrangement be the same on an old 2001 Highlander? I will look underneath to see if oil pan etc look the same but was again wondering if u new the arrangement of engine/oil part on a 2001. I look forward to watching more videos they are very good straightforward & include info & links in the description 🤗👍

Careful with doing this. Check your states 811 laws first as removing these marks may be a crime, and may also make you liable for utility damages. Those marks are there for a reason.

With my mixer, the screw that holds the pin in place is missing. Can a screw be substituted or does it need to be a particular screw?

Lefty Loosey, Righty Tighty...

My granddaughter has a 2018 Honda Accord Sport-2.0 liter, car that is so low on ground that he barely goes over a Shadow. I have to put 2x6 blocks in front of ramps so that front cowl does not hit ramps...

It's a pocket hole.

Unless you overload it the cut out is not necessary. Very good idea. My trays and platters are a mess.

why did it cost so much??

Those decorative cut outs are not decorative, they are there to make it easier to grab the edge of the pans so you can pull them out. Just add them now.

I have the same exact cooler and I used the same exact weatherstripping and it did not seal the cooler at all.

My bowl has opposite problem. It won't lock in place and flies off when mixer runs. Will changing the plate fix that too?

I’m afraid you have the air flow backwards for cabin air filter. Air flows from top downward. When you remove the filter, the up-facing side is dirtiest. It can be confusing because OEM filters say “up” with an arrow and aftermarket filters say “airflow” with an arrow. Those point in opposite directions though!