Відео

?

That is also a really good idea!

Yes, exactly right! Thank you very much, hopefully soon!!

I am a bit nervous about the first startup, but will try to film it. Having issues with key not being recognised… Yes, old project that i didnt film unfortunately 🤗🙈

Thank you so much!!

😂😂 would be a great idea if the whole garage wasnt uphill 🙈🙈🙈

Slowly pull them out, but make sure the temp is warm, if its cold outside its easier to break them :)

One is still okay, i want to 3d scan it and print it :)

It is Audi TT 8s. Check out other videos I made to get a better picture of the car 🤗

Thank you so much!!! Good luck with 3D! I found this one relatively cheap, I wish it was a RS 😂😂 Its not fun with all the right tools 😂😎 I dont have an engine crane, and the whole garare is slightly uphill 🙈 thank you so much for your kind words!!

Puh, a really good question actually.. i dont know for sure, but you can always take your plastic trim off an take a look, that way you will be sure. And depending on where you are located, you can probabbly write on lokal facebook group for mk3, and ask to swap you fixed spoiler with somebody, so you dont have yo buy it :)

If you are from eu, the shop is called “action”, and the spray paint is called “alu-zink spray” 👍🏻👍🏻

@ I want to make my alu brake calipers look like new. Maybeu just have to scrub and polish them. My old a4 2012 the alu control arms stayed always nice looking I don’t know how?!

The brake calipers need a bit better paint because they get hot, and much more abuse than this. Try to find silver 2 component paint 👍🏻👍🏻

Thank you for your help! Likewise 🙌🏻🙌🏻

Might come by and lend a helping hand 😂😎

Thank you sooo much!! It has a character compared to same car just black 👌🏻

@cars_anatomy can't wait to hear the engine roar to life!

That I am looking forward as well! As soon as the interior is in 🤗🤗

@cars_anatomy at least you are past the halfway mark!

Heheh, you never know where it actually is 😂😂

Thank you ❤️

❤️❤️❤️❤️

You deserve more subscribers!

Hehe thank you so much!! 🤗🤗 it will come with time and a bit more effort. I am glad you appreciate the work I have put in! Hope you are enjoying the whole series 🙌🏻🙌🏻

Thank you so much, your comment made my day!! I am so glad the video helped you, and I hope now things stay dry 🤗🤗

Thank you so much, I really didnt know that 👍🏻

@@cars_anatomy Indasa in Colchester sell an Amber cavity wax (472149). I have used it as a protective wax on suspension components with grest results. It self heals and does not dry out. It can be sprayed and brushed and does not look unsightly. Also easily removed with a petrol rag. Preserving the underside of a car is very difficult. I can send you photographs if you wish. Regards.

amzn.eu/d/d7brKSP

Thank you so much! Heres a link to what I used 🤗

❤️❤️

❤️❤️❤️❤️

oh man thank you so much, I really did try hard this time to make it right :)

Thank you so much! Unfortunately I havent.. but I think VC should get any video feed from mib main unit in the glove box. The rear view cam is also connected there, so maybe you dont need anything around vc… i am trying to connect head up display from q2 to audi tt 8s 😂

@@cars_anatomy Thank you for very swift response. video feed from MIB is via Most i presume (well, or fakra connector). Feed from NV module to VC is technically a composite signal. (pin 19 and 20). Im just not sure how target marking is fed. Autoliv on generic system has it implemented on composite, so i figure here is same. Other warnings (HUD,...) must be via CAN feed. On Marklines page, dissasembly (TT VC) there are good photos of the back side of the PCB, and while pins 19 and 20 have open connections, as far as i can see, they go to the mid-layers. Personally, id say there appears nothing to be missing. Can you have a look? :) Regarding Q2, as it is MQB, if you have similar gateway etc... there is a good chance, that that might be doable. You had a look at wiring diagrams already? Check codings for gateway, there should be installation confirmation in gateway, and 5F MMI should hold msg bus and other parameters in the adaptation. If im not mistakin, HUD is carried via clamp_15 as message bus. Ill have a look at my scan. If you got a contact i can share you scan.

sure, you can find me on instagram for example? I havent built the VC in yet, so if you want I can open it up again :)

Thank You! 🤗

Oh my, sorry to hear about your unfortunate story… try to claim it again, and seal it with silicone yourself as soon as you get your car back from repair… that way you know its done right :)

@@cars_anatomy The bad seal was claimed on my insurance since it was a result of an accident. To replace two trim pieces, the latch, the camera (I don't know why), and the harness, the total bill with a rental car for one week is $5,700 CAD ! In the bill, the dealer charged the autobody shop $1100 to "code and scan" the part and a return trip towing from the autobody shop. So crazy.

@ whoooaa, that is soo excesive😳😳 glad you got it sorted out❤️

@cars_anatomy After nearly seven weeks at a new shop and a new Audi dealership, the car was returned to me. I opened the trunk in the parking lot of the shop and immediately saw water sloshing around in the lift gate latch. They must have done a water test in the morning and didn't realize that the car had failed. I returned the car, ordered $370 latch #5 and shop disassembled the car and started over again to find new leaks. The new leak is coming from a bolt that had been covered in urethane from a previous repair at the original body shop. My insurance company has been exceptionally good throughout the process although I ran out of rental coverage a long time ago since this ordeal is now going on over two years in total. The car went back into a new dealership and new auto body shop.

@@logandonaldson my goodness, you really struck out of luck.. I hope it all gets sorted now..

Thank you very much, I hope you enjoyed the video 🤗

Thank you babe ❤️

Thank you so much Victor!! This is what I would try: Look under the seat, in the middle is the electric motor for movement back-forward. Look for cables that connect to motor, and search for connector on the other end of those cables( the connectors that go to the floor of the car).it shoudl be just two pins, maybe bit larger for power! Then use two wires and connect those pins with 12v battery from the car. Just touch the battery shorty and see if the seat moves( you will hear the motor). If you need opposite direction just switch + and - of the battery, and the motor will turn in other direction 🙌🏻 good luck!!

Hehe thank you so much 🙌🏻🙌🏻🙌🏻

Dont think so.. maybe the corrosion found its way under the small black “ chips” and something is damaged beyond repair :( Can you try to put 3v to diodes directly?

Hello! Wow, that is great! Good luck with repair, and let me know if you need any help. Almost all parts are compatible. Front and rear bumpers look different on ttrs, but other parts are same. Engine is different as well, of course :)

For how long your comment is, one would argue your “having no words”..

What would you suggest I should have done better?

....subwoofer dude. Just slots nicely under the boot perfectly. A lot of them fit in the tt :) ​@@cars_anatomy

True, but also a good way to make new friends!

Thank you very much 🤗🤗 i am working hard on it 😇😂

I agree. But I live in colder climate country so heatsoak isnt a bit concern for me. I also did it for the sound :)

Ofc I did. It is a must, since these mods are considered “stage 2” :)

Huh, didnt think of that. I will check what does the service manual says, but you might be right.. :) thanks!!

Do it because quattro will not work properly

Higly unlikely. Your best option is to use diagnostic tool to check for faults, and see what is causing it.

@@cars_anatomy hi thx for ur reply yes I did it's saying fault oil pick-up pipe must be blocked didn't think that would cause limp mode

@@faccl9820 honestly never seen fault like that. Dont know how the car is even able to detect such fault. But that would indicate you have oil pressure issue that can cause catastrophic engine damage. You really shoud open the oil sump and check that tube then :)

@@cars_anatomy hi thanks for your reply Must be oil pump pickup pipe blocked that's what the machine telling me but first I'll check oil pressure sensor could be the limp mode issue

@faccl9820 if its stuck, then its either metal pieces, old oil, or other object which shouldnt be there. There is no sensor on the pickup tube so I dont know how you are getting that fault..

Hmm, bin leider nicht mehr ganz sicher, als ich seit 3 jahre kein 8j mehr fahre :(

@@cars_anatomy ah Schade aber danke für das Video, will jetzt nämlich auch das SUV tauschen und das Video ist mir die größte Hilfe dabei

@@alexanderteichrib9525 oh es freut mich sehr das zu hören!! Viel Erfolg beim tüv!

Omg.. that is so expensive! I saw that the spoiler seal is not separate part, but it is glued to spoiler. Trust me this is your best solution 👍🏻👍🏻😎

@@cars_anatomy I know, all for the sake of a cheap seal. I’m just doing this one now, you are a star 💫. Thank you 🤩

@@LotusAir oh i am so happy the video helped!! 👍🏻👍🏻👍🏻 thank you!

Thank you so much Lorenzo!! I bought the car crash-damaged. Was a financial writeoff. Check the episode 1 out, its a long story but hopefully interesting 🤗

I know about the car (following the saga from day 1😅) but didn't understand yet what damage you've found on the engine (if any)

@Lorenzo_TT-RS ahh, I appreciate you so much!! The aluminium part between the block and plastic oil sump was broken.. of course, the oil sump as well. Other than that, all internal components of the engine are ok. 🤗🤗👍🏻

@@Lorenzo_TT-RS you are completely right, I just realised I didnt film the damaged parts. The most important part- I forgot to film 😂🙈🙈🙈

Weightsaving because race car 😂🙈🙈🙈

I would make sure to seal every point where water might be leaking in. So once around the perimiter of the spoilers, and around the screws as well :)

I have this problem also. Lifting the tailgate resulted in water flowing even through the seat belt entry points... taking it back to bodyshop where I got the wing installed tomorrow

@@challengeronrift oh my, that is aloot of water :(( i hoe they fix it. You can tell then to seal it like this. :)

Ohh mate, so sorry to hear that :( I really though modern car are build better, and protected from water 🙈🙈