Hello! Fascinating job. By the way, did you eve had a look at Q7 and A4/5/Q5 virtual cockpits? Im especially interested at the main PCB, rear view of the 32 pin connector, pin 19 and 20 - night vision. If you have any material on that, please do let me know :)
Thank you so much! Unfortunately I havent.. but I think VC should get any video feed from mib main unit in the glove box. The rear view cam is also connected there, so maybe you dont need anything around vc… i am trying to connect head up display from q2 to audi tt 8s 😂
@@cars_anatomy Thank you for very swift response. video feed from MIB is via Most i presume (well, or fakra connector). Feed from NV module to VC is technically a composite signal. (pin 19 and 20). Im just not sure how target marking is fed. Autoliv on generic system has it implemented on composite, so i figure here is same. Other warnings (HUD,...) must be via CAN feed. On Marklines page, dissasembly (TT VC) there are good photos of the back side of the PCB, and while pins 19 and 20 have open connections, as far as i can see, they go to the mid-layers. Personally, id say there appears nothing to be missing. Can you have a look? :) Regarding Q2, as it is MQB, if you have similar gateway etc... there is a good chance, that that might be doable. You had a look at wiring diagrams already? Check codings for gateway, there should be installation confirmation in gateway, and 5F MMI should hold msg bus and other parameters in the adaptation. If im not mistakin, HUD is carried via clamp_15 as message bus. Ill have a look at my scan. If you got a contact i can share you scan.
So nice, efficient and clear, clean work, well done!
Thank youuuu. ❤️❤️
I love your videos
Thank you so much, you are very kind!! 🤗
Hello! Fascinating job. By the way, did you eve had a look at Q7 and A4/5/Q5 virtual cockpits? Im especially interested at the main PCB, rear view of the 32 pin connector, pin 19 and 20 - night vision. If you have any material on that, please do let me know :)
Thank you so much! Unfortunately I havent.. but I think VC should get any video feed from mib main unit in the glove box. The rear view cam is also connected there, so maybe you dont need anything around vc… i am trying to connect head up display from q2 to audi tt 8s 😂
@@cars_anatomy Thank you for very swift response. video feed from MIB is via Most i presume (well, or fakra connector). Feed from NV module to VC is technically a composite signal. (pin 19 and 20). Im just not sure how target marking is fed. Autoliv on generic system has it implemented on composite, so i figure here is same. Other warnings (HUD,...) must be via CAN feed. On Marklines page, dissasembly (TT VC) there are good photos of the back side of the PCB, and while pins 19 and 20 have open connections, as far as i can see, they go to the mid-layers. Personally, id say there appears nothing to be missing. Can you have a look? :) Regarding Q2, as it is MQB, if you have similar gateway etc... there is a good chance, that that might be doable. You had a look at wiring diagrams already? Check codings for gateway, there should be installation confirmation in gateway, and 5F MMI should hold msg bus and other parameters in the adaptation. If im not mistakin, HUD is carried via clamp_15 as message bus. Ill have a look at my scan. If you got a contact i can share you scan.
sure, you can find me on instagram for example? I havent built the VC in yet, so if you want I can open it up again :)
Awesome
Thank youu 😁