Відео

I like them dry. I don't add butter, spray, mop sauce and more brown sugar . Haha. Some people like em wet for sure. They for sure were not over cooked though. Its Like asking a pitmaster why a brisket is burnt when it's just the bark. ; )

@@LetsDoThisWithEvan Watching the way they fell apart when you attempted to slice them was the indicator that they were overcooked. It's not a wet/dry issue.

Been making them that way at the meat shop for 20+ years. Customers don't seem to mind. Might be a preference thing. I have ordered other ribs at restaurants and I dont like stiff Hard to pull apart ribs. While both styles involve smoking, pull apart ribs often require longer cooking times to achieve extreme tenderness, sometimes involving wrapping in foil to accelerate the process. If you brine them before hand and still do a long cook they tend to hold together better. I Don't think there's a wrong way provided you like them. Doing a wagyu prime rib for Xmas. Make sure to follow along and see that baby pull apart. ​@ghankghank

@mutedxanime I've read some comments where it would work if air was blowing hot out of "some vents". But not sure if it wasn't blowing out of any.

I believe so. Reading the other comments it looks like it has worked in reverse also.

@ I appreciate it and love the video

Hey there 👋. My black knife is a Mercer High carbon. The skinning knife was my buddies. Not sure what that one was. But all the knives in the butcher shop are Mercer.

@zachareec2026 you can try without removing the side panel like others have stated. You can see the actuator arm through the gap under the steering wheel. Try to locate with a flashlight first. But there's other mechanisms that open the doors. So it might not fix your exact problem. If anyone does free diagnostics around you , you could get them to read what's happening. You don't need to have a check engine light for that if their scan tool doesn't suck.

I know, right? Haha. Hard to hold it and use both hands. I need a camera man.

My pleasure! Glad to be a help. 🤗

Very welcome! Glad it's a semi easy if not but a temporary fix. I've done this to mine over a dozen times now. Haha

Thank you for the kind words! Yeah, I can add the model number into the description. Might help people with that particular model find it better. Most front loaders will be the similar I think .

Dexter!

@@NolanWells-k4u won't hurt anything to try. Maybe?

Hey Georgiao, Glad you enjoyed it!

@ozkary thanks! Hard to think it was over a year ago! I have another ceiling i redid in my basement. Check it out! ua-cam.com/video/6FrJ0Zfxy00/v-deo.html

@@javier0304 that... is a great idea. Using tomorrow so I'll give it a go.

@shawnbrennan7526 there are no stupid questions. You're all good. I don't think it will work because you can usually always get heat. Might be your heater core. If nothing else try holding those 2 buttons like in the video and see if it cycles through all the vent positions.

@@LetsDoThisWithEvan Heater core replaced last year under warranty, but that didn’t fix the problem. Now they want $1,600 to fix the blend door actuator, WHICH THEY WERE RIGHT NEXT TO LAST YEAR!!!!!

@shawnbrennan7526 well, it doesn't take much to give the blend door arm a poke. Try it out and let me know! Hope it works!

@@LetsDoThisWithEvan Poking didn’t help me. 1.5 hours to get the part out. 45 minutes to put everything back together. (I just put a headless screw in the third spot, so it’s just a post.) I have heat again for less than $40.

@@shawnbrennan7526 I'm surprised you responded only an hour ago. I have been having the same issue for the past few years. Eventually the heat would turn on or the AC would turn on over the course of a month when I set the dial to hot or cold, but this year it did not. I was just able to to get the actuator to switch over to the heat setting ten minutes ago and came back to let you know. I had to take part of the lower panel under the steering wheel of get something in to push the arm up. I had tried sticking something in through the gap below the steering wheel but I didn't have any luck.

@@phillipphil1615 thanks! I tend to make videos I would watch. Give the info and leave. Haha

We have some good Brazilian steakhouses around and they serve it with fat cap on. Very good. Jail worthy offense i agree.

@lesleymata1414 I'm going up this weekend and I'll take a video for you! I'll post it next week. Last time I looked they both seemed to be doing well. It's been 5 months about. All summer it was outside , unshaded. So we will see! Thanks for reaching out!

ua-cam.com/video/s_c9m_DU8QM/v-deo.html

Haha. Funny how that works sometimes. Must be that time of year!!

I would get somone with a nice scan tool to hit it for free if you can. Even without check engine lights the scanner can check all stored codes. Could be a faulty temperature sensor.

@tryhardjody142 pretty sure it is the same mechanism for both. Just stuck one way vs the other. Did you hold the 2 buttons to reset the blend doors?

Good question. I have air on both sides, but heat only works on the driver side. I get wind out the passenger side, but it's just luke warm at best instead of nice and warm like the driver side.

Thanks!

@Balumallisetty star bit / 6 point screwdriver I belive. 2 or 3 screws. Might not even have to take off the panel. I just took it off for the video

@cookwithdrbrooke the ends should match up of you have them turned and the patterns are together. Caulk like on the video for the side edges. But it would be a bit more difficult. That is why I did the wood border. It runs down the middle and outside edges to hide all of those end joints. Hop that helps. Could always go with a more low profile board , look up furring strips to use on the end pieces. That was going to be my other option. I'll put a link right here for my other ceiling I did in my house. ua-cam.com/video/6FrJ0Zfxy00/v-deo.html

@dzekoljub oh man, I wouldn't know . So sorry . Not a mechanic. Just got a tip to do this from one .

@@LetsDoThisWithEvan i just asked, ill try tomorrow when i come home. 😁

@@dzekoljub good luck! Let everyone know!

@@LetsDoThisWithEvan no worries i will 😁

Lol, no problem. Glad you found it!

@karanmehrotra3479 not sure. I'm pretty basic on it all. Got the tip from my mechanic friend. Basically all the VW actuators fail. It's when , not if. You'll know of some vents blow cold air. So, AC only ? Any version of it.

@apriltipton9719 You're very welcome and thanks for stopping by!

@mostlyme2539 thanks! Hopefully gives some ideas on what can be done. Few ideas different ways to go about it.

@davidjosephhansen8555 1 x 6 pine I belive and coated it with anti penetrating stain. I did not take off the rails but scraped them out good and cleaned em. Pvc would be a good choice. Skips some steps for sure! Rewiring wasn't fun.

I would have no idea. Did you try resetting them like at the beginning of the video holding the 2 buttons? If you manually switch it from hear to AC do you see the actuator arm moving on its own?

You're very welcome! Enjoy the cool breeze 😎 👌

So interesting that each state, county, country ect has different codes. Bringing in all that extra fill would be a pain. How far down did you have to go? Conduit would have been my next choice. Cheaper wire and didn't have to go as deep. The GFCI thing still get me though. Lots of extra money 💰

Thanks! Might make a longer more in depth video later that will answer more questions people may have.

@CXDDLY maybe, lean more towards that when we build an actual structure like a cabin. This was all just a quick fix to use the property more quickly. My inlaws also needed electric for their camper. Solar from what I seen isn't going to run a 50amp outlet. But I haven't researched enough.

Thanks for coming to check it out! Much appreciated. I'll keep the updates coming.

Same!

Thanks for the comment. Hard to find any straight info on this kind of stuff. Hoping to let people get a look behind the curtain.

@kyushchawla8614 no problem! I suffered a long time before I figured out the fix. Replacing that actuator is something I never want to do. I keep my AC on all winter now too.. lol. Glad you found the video!

@@LetsDoThisWithEvan Oh okay. Does it mean you can’t adjust the temperature control in the winter. Does the door get stuck again?

Yes, it can. More than likely it will. Ive had to do this multiple times. Usually if someone else drives my car and doesn't know. ​@kyushchawla8614

Wrong side. You want to go into the driver's side. Hope it helps!

Ok so there is only 1 white little arms on the driver side. My car is right hand drive and the problem is tge passenger side actuator. So you said I have still have to look for that lever on driver side. Ok will look later on Thank you

That sucks! Is the hot air coming out the right 2 vents when AC is on? What year car?

You definitely want to give it a solid push. You won't break it. That being said don't take a crow bar to it ; ) . Let me know how it goes!!

Felt like I was gonna break it end just left it alone. I have extended warranty, I'll just get it fixed. But the video was very helpful.

I kept messing with and popped the arm off. Smh. Mine must be defective.

@somaliahwallace987 oh my! First I've heard of that! Not like it was working anyways I guess. Hope the repair isn't too much. 😕

You're so very welcome! Glad it worked for you!

@guachito33 the system does it on its own next time like you said. Thanks for Checking out the video!

I have a 2017 Passat and also don’t have to remove the cover. Was able to adjust from under my steering wheel 😊

@ericaA205 that's great! Thanks for the messege. Also, I'll put my cover back on then and give it a go! Haha. I've had to do this 12 X's plus.