Відео

@@larrynewberry3500 thanks for stopping by Larry!

@@HorsePowerObsessed LOL…. Thank you and not there was a LOT of that shirt in the video 😂 I’m very pleased with the resultn

@@thiosemicarbizidebenzoylal2921 thank you! It really turned out great!

Awesome! Thanks! Great product and I also LOVE my floor mats from you guys!

Thanks Gordon! As always thank you so much for supporting the channel

I was actually QUITE surprised at the quality and then how well they fit! 100% recommend

Thanks Mark! Appreciate you

Thank you! Yah the emblem would put this over the top! I really am impressed

Thanks! I absolutely LOVE this truck!

I appreciate your input always Mr T! Thanks again!

Circle track?

Me too!!! My friend and I have talked about this EXTENSIVELY…… cam swap and E85 tune! OMFG would make over 700 RWHP for sure…. I hope someone cracks this ECU ASAP.

In those conditions with a 200 lb passenger (me) I don’t think my Z06 would be able to beat that. I have Dragy 0-60 video coming soon…. Going to put on the Cup 2 Rs and let it eat

Nate used launch control on both of his pulls…. May want to watch again. Also the point is these cars will NEVER do a 2 second 0-60. We proved that easily. Thanks for watching

Thanks for commenting

That’s awesome! Some folks don’t have warranty anymore and I didn’t even want the little tiny marks that accumulate over time. I’m very pleased with this addition. Thanks for watching!

Haven’t gotten this one out to the track yet……. Our goal is low 9’s and hope not to break any driveline parts LOL. Stay tuned because we will be renting the track soon to get some numbers! Thanks for watching Clay!

I am envious of you. You are talented and can do stuff we mere mortals struggle with. Hell- you built a racecar from a forgotten vehicle. Congratulations

@@Texas_Clay Thanks Clay! Wait until you see the Boss 302 swapped 2003 Mach 1 we are almost done with……. It’s a VERY cool project! Should make over 600 HP to the tires N.A. and it only weighs 3000 lbs! Going to be a wild ride!!

@@dbmracing2019 - with all you got going on, I’m gonna guess you are a single man.

Would probably be too hot for groceries but a cooler with ice would be just fine….. 100%. Thanks for watching and your question

​@@dbmracing2019thank you very much!

@@MotoChris98 my pleasure

If you were local to Atlanta metro could make that happen……. I absolutely LOVE the C6 Z06 cars! And engine light on because it was only power on and not running 😊. Thanks for watching and commenting

Yeah.. wish I was closer.. beautiful car that c8Z.. you can see mine if you click on my name.. the power of the c6 z is crazy also.. I've had mine 13yrs now.. can't give it up.. 😊

@@driven555 you are correct! That LS7 and the low weight make those C6 Z06’s s car that is still faster than many newer cars. I will own a C6 Z06 one day. Those wide body C6 cars are tied for my favorite looking Corvette of all time

Yeah I love the Mighty Mouse catch can! These platforms are so good to work on and they respond so well to power mods. This whipple continues to amaze me. I took this car out yesterday and really got on it and when I was done and back at the house…. I could put my hand directly on the blower lid and it was still cool to the touch! Crazy how good they are with addressing heat soak! I turn a lot of wrenches myself but I’m definitely no pro 😊 thanks for watching!

If you are cruising and just loafing it…… this car will actually get 20-21 MPG! Real world around town is more in the mid teens MPG 15-16…. If you can’t stay out of the fun pedal it’ll drop fast 😊. It’s really crazy that you can get 21 MPG on the highway with this thing! Thanks for watching

I still bet your 396 rolls out with that procharger on it! Thanks so much!

I completely agree…….. thank you 🙏

For absolute efficiency and power……. HECK YAH they are. Maybe next build 😊 also the ability to adjust boost on the fly without pulley changes etc

I actually have SRT Brembo takeoffs and spindles I need to put on just need time. And I have been considering a front end as well!

You could do EXACTLY this build with ANY year. I just got the 2009 after the 5.7 went kaput and figured…… I want a demon but I don’t want to spend stupid money for it……. Called up my guys at Injected Engineering and the rest is history. They have even done these builds on trackhawks, durangos, jeep, LOL. It will work on any year Challenger or Charger. Automatic or Manual. Doesn’t matter. You can do this exact same build 😊

Could even ship to them if not local. Call em up and ask for Haden and tell them I sent you 678-449-6871. Just talk it over and see if it’s something you would be interested in. Dont even have to go as wild as I did but they will 100% take good care of you!

That’s the cost for EVERYTHING….. I dropped it off and then they handed me the keys when done and tuned. Those prices and the receipts include labor and everything…… only thing that wasn’t listed on there was the Mantic Billet Triple disc clutch but I mentioned the cost in the video. Those prices are them doing the swap…….. it’s pretty easy honestly since we bought the crate motor and just sent the 5.7 in for core. Everything was ordered and just dropped right in…… transmission was already built by my friend who owned it previously and that was probably around $4k he said but all those receipts and the total I mentioned in video was me not doing anything other than LOTS of cleaning and all the exterior mods, seats, etc. If you are ANYWHERE NEAR Atlanta, GA you HAVE to contact Injected Engineering man….. they are AWESOME! Ask for Haden and tell him I sent you. He will take good care of you!

I actually have a set of SRT take offs and the spindles ready to go on! Just need time to put them on HAHA! Thanks for watching and commenting!

If you keep your right foot in check you would NEVER know it had this much power! Ice cold AC and stereo upgrades and it’s a GREAT cruiser/driver car. I could easily daily driver this with ZERO issues or concerns! Thanks for watching and thanks for your question

I couldn’t have said it better myself! And my C8 Z06 is also a monster because it hooks! And Demon prices are not going to go up like ACR etc and they are same price! Crazy!

Yes! Brilliant Black! Thats what it was! And I absolutely LOVE that color! Thank you so much!

Thank you so very much! This is THE STUFF we dreamt of as kids! I love every minute of it! The graphite color is “Cadillac Grey” and it has a clear coat over it. Looks amazing in the sun. Yes I can get to ECU with sway bar on just have to pull it up towards cowl. Thanks for the kind words!

Brembo upgrade incoming from SRT take off. I don’t ever run it where I would depend on the RT brakes to stop it over and over……. They will definitely stop it where I run it…… long pulls with long runs. But yes I have a take off set of SRT Brembos that are going on very soon. Thanks for watching and commenting

What great times we live in to have factory offerings with those HP numbers! Dont forget that this car makes almost 1400 at the tire on full kill…… that’s 1650 crank horsepower! So wild!

Tell me about it man! I am looking for a drag wheel/tire so I can actually push it hard. Traction is a MAJOR issue at the moment especially on street tires

We wanted to make as much RWHP as possible and come in under or around the price of a used Hellcat or Redeye. We succeeded 😊. Thanks for watching

extremeonlinestore.com/products/corvette-c8-custom-honeycomb-leather-floor-mat

You won’t regret it if you go that route. It’s just so easy to make power with a stroker motor in these cars…… I’m only on 16 lbs of boost making 1050 to the tire! You’ll need to plan for a better clutch. We tried stock Hellcat clutches and kept smoking them. Thanks for watching!

Viral would be nice! Share to all your friends and car folks you know. Wait until we run it at the track! Thanks for watching and commenting my friend!

Thank you! 🙏

Thanks Gary! What most folks don’t understand is that to make 1050 at the tire that’s 1200 crank…… and when we were making almost 1400 to the tire that’s 1650 to the crank! Assuming the standard 15% drive train loss for manual transmission. INSANE

Never been tuned for 93 octane. Built with E85 in mind for the start

What size fuel pumps are you running?

I sure do! It’s the best car I’ve ever driven!

@@dbmracing2019 Amen Brother