![Thrash Test Dummies](/img/default-banner.jpg)
- 20
- 236 807
Thrash Test Dummies
United States
Приєднався 13 лис 2018
If you dig motorcycles you're in the right place. All this channel is about is tutorials, entertainment, and general motorcycle talk. Here you can learn how to make your bike faster, nicer, or just how to build your own bike from the ground up. There is no brand loyalty here. You will find every make and model of bike that we can get our hands on. Some end up in shows. Some end up totaled. Whatever you like, you will find it here.
I am in the process of updating my channel at the moment to better optimize it for you. Your understanding of my lack of uploads would be very much appreciated.
Who am I?
I am just another guy who loves motorcycles. From paint and upholstery to fabrication and engine work. I do everything and I just want to show my subscribers how so that we can get past the "buy a bigger bike" morons that come out when you say you want to change something about your bike. They don't know how. But I do. Just give me a chance to show you...
I am in the process of updating my channel at the moment to better optimize it for you. Your understanding of my lack of uploads would be very much appreciated.
Who am I?
I am just another guy who loves motorcycles. From paint and upholstery to fabrication and engine work. I do everything and I just want to show my subscribers how so that we can get past the "buy a bigger bike" morons that come out when you say you want to change something about your bike. They don't know how. But I do. Just give me a chance to show you...
How To Rebuild A Motorcycle Carburetor (in 4.914 minutes)
Looking for tips on How To Rebuild A Motorcycle Carburetor, how to clean a motorcycle carburetor, or how does a motorcycle carburetor work? Well, you have come to the right place. Cleaning and rebuilding your carb should be part of normal motorcycle maintenance. They really are not all that complicated, and in this quick video I will give you the basics of a full clean and rebuild.
Keep in mind, this video just goes over the basics and is meant to be a baseline video to give you a better understanding of how a motorcycle carb works, as well as how to clean and rebuild it.
If you would like to see a more in depth video, please comment and let me know.
Also, don't forget to like and subscribe, and go check out my other videos!
Thanks for watching!
Keep in mind, this video just goes over the basics and is meant to be a baseline video to give you a better understanding of how a motorcycle carb works, as well as how to clean and rebuild it.
If you would like to see a more in depth video, please comment and let me know.
Also, don't forget to like and subscribe, and go check out my other videos!
Thanks for watching!
Переглядів: 9 772
Відео
Harley Davidson Custom Inner Faring Build
Переглядів 1 тис.Рік тому
Check out this Harley Davidson custom inner fairing build I'm doing on my personal performance bagger! This fiberglass tutorial shows the basics of building your very own custom Harley fairing for any custom bagger. The basics are the same for many applications on custom motorcycles, so if you are new to working with fiberglass this is a great starting point. This video comes as I am building m...
club style kawasaki vulcan 1500
Переглядів 7 тис.2 роки тому
club style kawasaki vulcan 1500 build part 1 will be all about weight loss! Who knew that the kawasaki vulcan 1500 classic had so much in common with the harley davidson dyna? All you need to do is start taking things off, throw some attention toward handling and performance, and then go after the look you want to get that custom kawasaki vulcan. This is only the first video of this custom moto...
Making a $300 Honda Shadow Run
Переглядів 8122 роки тому
And here we are polluting the internet with our unfiltered idiocy. This is us making a $300 Honda Shadow Run again. Or did we? Do we really know how to fix motorcycles? Or even how to get a motorcycle running? I mean, we bout a $300 honda shadow off of facebook marketplace. So it's anyone's guess really. If you'd like to support the channel go ahead and subscribe, leave a comment, and check out...
how to put a 21 inch front wheel on a vulcan 1500
Переглядів 10 тис.2 роки тому
Want an easy way to put a 21 inch front wheel on your vulcan 1500? Well, look no further! I show you how to do it for cheap on my Kawasaki vulcan (2005). If you like bike builds, tutorials, projects, or just general nonsense click the subscribe button and follow along. I have MANY projects coming in the future and, unlike a lot of people, I actually do them! Hit me up in the comments if you hav...
Honda Rebel 250 Torture Test
Переглядів 1,3 тис.2 роки тому
Have you ever wondered how much a Honda Rebel 250 can handle? Ever wondered what happens if you put a redneck on a rebel 250 with free reign? Well in this video we find out! This is the Honda Rebel 250 Torture Test. Some of the questions we answer are: 1) Will a motorcycle run on paint stripper? 2) What will happen if you put cooking oil in a motorcycle engine 3) How can we add power to a honda...
How to put lights under paint (THE ULTIMATE FLUSH TURN SIGNALS)
Переглядів 1,5 тис.3 роки тому
Forget those cheap "low profile" lights. How about NO profile? In this video I will show you how to put light under paint for the ultimate flush turn signals or whatever else you want to use it for! feel free to provide your input and use this video to inspire you to improve on my way of doing it. As always, thanks for watching and enjoy the video. Don't forget to like, comment, and subscribe!
SINGLE PHASE TO DUAL PHASE LED [tutorial]
Переглядів 9393 роки тому
This video shows you a simple way to convert any 2 wire (single phase) LED to a dual phase LED. This means you can take any LED and turn it into a running light/turn signal or a running light/brake light. Or any other possible use you would have for a dual phase led. If you like the video go ahead and like it and subscribe!
Harley Davidson Road Glide Review
Переглядів 1223 роки тому
Are you thinking of getting a harley? WATCH MY HARLEY DAVIDSON ROAD GLIDE REVIEW FIRST! I will say, I love the bike. But is it worth the hype? You decide! And if you found value in this video remember to like and subscribe for future content! Thanks for watching Got video suggestions? Comments? Hate my voice? Let me know below!
How To Wire A Turn Signal Circuit From Scratch [2021 Follow Up]
Переглядів 25 тис.3 роки тому
This is a follow up video for my previous video on wiring turn signal circuits. Apparently I was not very clear in that video and saw in the comments that there was some confusion, or possibly (probably) people giving advice on something they know very little about. Either way, confusion or troll, I hope this helps! Original video link: ua-cam.com/video/qAuiBkyfPYM/v-deo.html Online store: tees...
KAWASAKI NINJA RESTORATION [PART 2- 2020 BRAKE CALIPER REBUILD]
Переглядів 2,9 тис.3 роки тому
Moving forward on the ninja project, in this video I rebuild the brake caliper. enjoy! Dont forget to like, comment, and subscribe!
Kawasaki Ninja Restoration [Part 1 - 2020 engine rebuild]
Переглядів 18 тис.3 роки тому
Kawasaki Ninja Restoration [Part 1 - 2020 engine rebuild]
D I Y Motorcycle engraving [Engrave motorcycle parts with a dremel]
Переглядів 21 тис.3 роки тому
D I Y Motorcycle engraving [Engrave motorcycle parts with a dremel]
MOTORCYCLE TURN SIGNAL CIRCUIT EXPLAINED [tutorial]
Переглядів 25 тис.4 роки тому
MOTORCYCLE TURN SIGNAL CIRCUIT EXPLAINED [tutorial]
How to diamond cut a motorcycle engine by hand
Переглядів 45 тис.5 років тому
How to diamond cut a motorcycle engine by hand
So this connection, can I actually use this setup for my Polaris 200?
I seem to be struggling to find a vn800a front rim that size. Any help would be appreciated.
This was so cool. I didn't know you could do this with a Dremel.
😊 graciass por enseñar lo que sabes
It does have 4.5 gal fuel tank it will go 200 miles easy before u need gas set 1 trip meter. You will no when it get low it will let u no it will coff.then put on reserve get too gas station quick
Yeah that's an archaic way of "letting you know". A gas gauge would be better. Lol
Runs great it will smoke the tire 1.2.3 for 2 blocks good bike u just have not rode a honda
My first bike was a Honda. Lol. I've had several Honda's and still have a vtx. What good would a review video be if 1) the person doing the review has no bikes to compare it to, and 2) if they were just going to act like the bike was perfect? In that case I'd have to say every bike was perfect. Also, how have I "not rode a Honda"? I was riding one in the video 😂
I have 2005 with 24,479 miles and it still has the same clutch no problem bought it new no problems will do 100mph no problem
That's not a lot of miles. Lol. And I never said the clutch was bad. Just that it was spongy
Just bought an 07 vtx 1300R. My last 3 bikes were Kawasaki 1500s. I'm 71 and haven't had a Honda since the 1960s.
I want to put a fat boy rim on my Vulcan Are they the same you think?
I have a 2006 vtx 1300 I've always been been a small guy 5'8 120 lbs when i first got the bike i was a little worried about the weight but got very confident on it when i bought it it didnt run it had a defective choke it never closed properly 1st gear was like you said got to give some gas and feather the clutch i put a jet kit 58/195 cobra long exhaust gutted the air box deleted the choke and emissions iv gotten so used to the bike 1st gear is no problem i can come out of the hole full throttle but have to let back when it crosses up.i have owned at least 30 bikes since 1975 and i work on them too by the way i lived in Louisiana in Alexandria parish and walker outside of baton rouge like your channel
Maybe it's the crap hanging off your face.
So what's a grow back. Is it from. The hurricane.......
Looks like Homa fra kli. Area
I changed oil on my VT1100C Shadow Spirit. Installed the K&N 20W/50 Oil. I feel an improvement in the clutch and gear shifting. Anybody else try it?
Hey man do you have any contact info,id love to talk man ,i have a vulcan and i want alot of things on my bike like you have?
For sure! Email jeff.nobody438@gmail.com with anything you want to know
I have the same motorcycle mine's a 2004 I love it same color I have the straight bars and I love it
I just bought one of these yesterday, 04 with 14000 miles on it for 3500 and had did all the service on it, Rode it home, Great bike, almost like it better than my Yamaha 1100 V-star which will be up for sale soon. Seat has a little to be desired, butt was sore after a 110 mile ride home from picking it up. But love the power and sound.
Great explanation. You helped me out with all of my questions.
You bad review
Why? Because I was honest about my opinion and it didn't line up with yours? Lol
Great video. Honest review. Just a few tweaks on the bike. Maybe you are more used to harley not metric. Just saying you may just need to get used to it. I just subscribed. Thanks.
I have more metric bikes than Harleys. Started riding at 15 and didn't get my first harley until I was 31. I'm very familiar with metric bikes.
But now what do you do with the brake light
Yo good looking on that video I needed that
Jschlatt is diversifying, good for him
I ride a 07 Vtx 1300r, 24,100 miles great bike.
I started to wTch but, I cant trust any man with rings in his lip. I just can't!
The man with lip rings has built more bikes than you've owned 🤣
Best bike I’ve had so far and I’ve had a lot of bikes.. all big v-twins… I liked the vtx so much I changed it after a couple of years for a Honda Fury.. same engine and it’s even better.. maybe cos it’s a bit lighter being stripped down chop style.. it rides smoother and handles very well. The VTX is one of the best cruisers by far.. the 1800 is a beast but I prefer the handling of the 1300.
Update
I will be uploading content to a different UA-cam channel for reasons concerning optimization. The main focus will be working with the vulcan line for the foreseeable future. I just got a 4 axis cnc machine and plan to build custom engine and cosmetic parts as well as focusing on performance and handling of these bikes. I have designs for pistons, cams, rocker arms, etc. as well as several other things to drastically change the appearance of the vulcans and give them more of an aggressive modern look. Even down to a chain drive conversion. Once the channel is up I will post it under your comment here since I have pinned it to the top.
Yup. I have the 1300 as well, and I was annoyed at how high first gear is. It makes it hard to maneuver at low speeds. You have to feather the clutch a lot. Also I'd really like a 6th gear. I'd like a tach. And I'd like a gas gauge. Other than that I love this bike.
Where did you buy your parts from, did it come as a kit or did you buy everything separately
You're honest 🎉
There are SO many ways to wire turn signals. What you put out here is one of the simplest and easiest to wire and is a good example of how to wire them. Those that can't expand on what you showed here and figure out how to make it work on their project should not be trying to wire anything. Don't worry about the keyboard warriors, you could go through all the different ways to wire these and someone somewhere would find a way to nit pick it.
Hi Brow. Do you make a pair of mirrors and a engine protector engraved to my HD Deluxe 2013. I'm from Brazil and Will be in Orlando by end of July.
Is there an update?
Great video, many thanks
Good video. Boutta go check one out today. A little nervous considering I’m like 130-140lb’s and trying to move up from a vstar 650
Currently hoping to start wiring up my SR 500 to led headlight and indicators.
Thanks for the vid. Could you run all ground wires into a terminal block and from that block to frame or battery?
I’ve been riding just under 2 years, 2003 VTX 1800R. I mostly ride in St. Tammany and a little in Washington Parish. My first and only bike. I don’t know enough to talk about other bikes, aside from noticing the 1800 has a hydraulic clutch. It does have long gears, as you describe. I can be at 15 mph on a neighborhood street and the bike almost wants to be in second, but second ain’t ready till at least 20 mph. Mine is at least 800 pounds and I’m a pack rat with the equivalent of the fat boy scout character in a young adventure movie, in my many assorted bags. Bandaid, beans, cigars, tire plugs, jump box, air compressor, camping gear, the list goes on. It’s kinda tarded but, I like backup plans. Anyway, I know this video is old, but I dig your presentation. If you see this, can I ask what camera you’d suggest? I don’t know if I’ll try making videos or anything, but it’d help in a post wreck dispute. Assuming I survive said wreck. Cheers.
Hi I like to bypass the turn signal switch and add wiring to it to make my turn signals work on the front indicators on the dash and on the rear turn signals is it possible to add wiring to it and bypass most of that stuff if I add a relay and running straight from the battery
I've had an 05 1500 FI for 10 years. Awesome bike
Awesome thank you so much 🙏👏👏👏🙌🙌🙌🙌🙌
Thank you so much bro
Good bikes. The 1800 is even better
Out of all the uploads others made of this , this one by far is simple to understand. I appreciate your simple instructions. Thanks much & ride safe brother.
Phil Anselmo reviews motorcycles. 😉 Great review brother. Thank you
I have had a Honda Shadow 1100 Spirit and Sabre. I currently own a 2007 Honda VTX1300R. I really miss my 1100 Shadows, especially my Sabre. I miss them enough to wish I never bought the VTX. I'M not as comfortable on my VTX as I was my Sabre. Now I'm considering selling it and I'm considering a 2014 Kawasaki Vulcan 900 LT to replace it with. I know some of you would never give up your VTX for a Vulcan 900. When I consider the fuel injection, belt drive and fuel range of the Vulcan as well as the price. There's a lot more pro's than Con's. Any recommendations from y'all?
Is this a 2009 Kawasaki 250r
Can you pls list all the tools needed for this job
Nice! Real real nice. How can you make a strobing brake light? 🤔
I agree with the 1st gear statement.