Відео

can you provide a teardown picture of the battery inside? I'm going to build an active balance circuit but don't know if I could put it in. 8x8x3mm or so for the dimension..

I'm surprised at the lackluster reviews considering the exclusivity of it with Ewheels. I thought that Ewheels would have had better input at bringing out a better wheel, they display being the biggest miss apparently. Cheers

Question, what would you use to replace the seal around the control box (damaged it when having to replace the 24v board)? Home Depot only had two that were recommended to me the Permatex Ultra Black (gasket maker Oil resistant) or the permatex clear adhesive sealant (silicone RTV). Would either of these work or would you recommend something else?

Too many complaints already on the Wheel. Something is up with the wheels on these. Also needs a pedal raising kit as well.

I saw that you've got the v14 onboard as well. Could you compare its torque to the Blitz and which performs better when it comes to acceleration and braking? Thanks in advance, cheers!

It looks like the tyre is on back to front. Tread is upside down.

Any updates on the King Song F22 drop? And will this be King Song’s flagship wheel? Thx

I love it, when companies break new ground, in creating the perfect wheel. The Blitz checks many of the boxes, we have requested. I can’t purchase every wheel, so I focus on wheels like the Blitz, that have nudged innovation enough to create a better riding experience. Will Begode have an official seat available??

It's a C32 3500W motor

Wont argue bout the materials but to say the trolley handle is 'crap' is somewhat premature. I'm a huge fan of the K.I.S.S. principle so simple is best, for me. Its a trolley & the main issue is does it work? If it dont, then ya its trash but otherwise, its a trolley. To me, its not the most elegant but from other vids of usage, it seems much stronger than the old janky BG pullout trolley. The plastic plates btwn batts are only meant to cover the gap & not structural support so I get why its flimsy plastic. Been using a 1/8" ABS sheet on my Master v4 & T4 for this purpose so for me, this would be better as it saves me this step. The display on the front handle tho is crap as it cant be seen whilst riding. Rest of build seems ok if not good, to my eyes atleast. Thanks for the teardown or buildup rather

What tyre is this?? Looks great

Still don't get how this thing can cost almost 400 dollars

The dark color of the suspension tubes could be hard chrome plating which, if so, would be a nice durability upgrade.

I really enjoy watching your breakdown of wheels, not only to know what level of quality and engineering goes into a wheel but helps when we eventually have to work on them ourselves. Since I have a v4 Master I am very interested in how things have improved in the Blitz. One problem with the Master is the way the fork tubes are clamped top and bottom causing the tubes to distort and bind at each end of travel. On the Blitz it looks like there are threaded plugs reinforcing each end and keeping the tubes round. Of course, this eliminates the ability to use the tubes to house the trolly handle like the Master. Despite the compromised trolly handle on the Blitz, I think having a free sliding suspension is more than worth it.

thanks, very informative. Pretty sure the motor is C-32 tile motor, first time in use. I'd recommend trying the trolly handle before dismissing it completely - even with it's limited pivot point, and lack of any lock, it works better than trying to just use the front handle/screen. I'd be interested in the easiest way to get at the Blitz rim/hub motor, once fully assembled for a tire change. I'd think the tire change would be similar to Master, but I'd like to see a video getting to the rim for tire change access to see any differences.

Apparently the max [rider] weight is 150 kg

Where is the gloves'compartment!? 😉

solid 🤪

now - let's wait 6-9 months now to wait for the second batch to arrive - zero confidence on this brand

The extreme looks much more durable. I hope its successor has at least the same durability!

Outstanding!!! Two questions. Q1: Could the display be velcro'd or foam-taped to the top of the light, and a spacer inserted to where the display once was? Currently, you can't really see it, where it is at because of angle, and it's in a bad spot if wrecked. Q2: Those motor-mounting fastener heads are so thin-walled, I fear they will snap under extreme torque. Or worse, break off with nothing to grab onto. What do you think? Thanks. ~maverick

Like the wheel but those motor bolts look to small and weak to me and the heads are likely to strip and crack when you need to change your tyre .

Uh really green light near rear, noooo.

Rim diameter stated thanks.

Think we need some innovation and have quick release pedals adjustments. 8 screws per pedal and a hammer just to lower/raise the pedal 1 inch is doing too much

Excellent video and thanks for sharing some details about the blitz. Not enough of a upgrade coming from a master v4.

Good info... I hope other EUC producers will come up with light weight wheels in near future

How awesome that these things exist.

Did you ever finish work on the combination Sherman and S-18? I'd love to see the results!

Please also show the low amp setting working on chargers, such as 1.5 amps, for those on solar you see. Thank you.

How do you get to motor phase wires?

I think there should be some innovation like have the charger built into the wheel and only need a cord to plug into the outlet, like Solar Generators. We still in the Dinosaur Era of EUCs like Computers and Cell phones were in the 1990's before Apple announce the iPod, then everything changed for phones and computers. We haven't had that disruptive aspect of EUCs yet, but things can be a lot better than what they are

They look phantatic but they cant deliver at the moment ....

Thank you that looks easy enough to break down and make sure everything is nice and tight. Thank you. I just placed an order for mine.

inmotional damage

I disagree cables are fine like that i have been working with them for nearly a year now V14 is a solid wheel !

Inmotion have many errors: V11 bearings error, V12 Control board errors, V13 faulty battery errrorcode V14 bad cable placement. Will they ever learn?

so it was a faulty motherboard after all?

Hi Kevin I got a new mten4 and when I ride it tilts back while I ride until it falls back. Takes like ten seconds I need some help.

i see born-dead model

I just got mine today I unboxed it I couldn’t get it to power on, so I decided to charge it. It’s been charging for about 40 minutes now and I tried to start it powered on nothing unfortunately Im unable to connect to the app because there’s no power to it.

Always 🔌 into the wall first, only after connect to the wheel.

Charger appears to need a variable speed fan controller linked to board temperature. This is the feature that is preventing me from buying at any price.

Is this works with s16 ? I have the same issue with it😢

what are the little screws for in the bag?

did this lower it and make it wider?

pre-ordered this as well. excited to get them on mine. thanks for this video~!

Thank you! Very informative a nd helpful. Is this the 66lb version?

Thank you for the comparison. Very helpful.

What's your favorite euc sir? please reply🙏🙏🙏