- 34
- 324 478
Hella Stoked Garage
United States
Приєднався 5 вер 2017
Just messing around and fixin / building some stuff! We usually end up acting kind of dumb but its fun!
If you like what we do, Subscribe! But you don't have to, we are just glad you are watching!
All work I perform in my videos are ideas I came up with that work for me or ideas I got from other UA-camrs. I am in no way a professional. If you perform the same work that I have done on my own stuff you do so at your own risk.
Email: hellastokedgarage@gmail.com
Instagram: hellastokedgarage
Bike: 2018 Indian Scout Bobber (ABS)
Bronco: 1973 Ford Bronco fuly restored from the ground up, painted with Pro Spray Ford J4 , deep Impact Blue Metallic
Cameras used: GoPro Hero 3+ on the Bilt Techno 2.0 helmet
Eken H8 Action Cam / Akaso EK7000 Action Cam / Sitting cam Canon Rebel T6i with a Movo VXR10 Video Mic
If you like what we do, Subscribe! But you don't have to, we are just glad you are watching!
All work I perform in my videos are ideas I came up with that work for me or ideas I got from other UA-camrs. I am in no way a professional. If you perform the same work that I have done on my own stuff you do so at your own risk.
Email: hellastokedgarage@gmail.com
Instagram: hellastokedgarage
Bike: 2018 Indian Scout Bobber (ABS)
Bronco: 1973 Ford Bronco fuly restored from the ground up, painted with Pro Spray Ford J4 , deep Impact Blue Metallic
Cameras used: GoPro Hero 3+ on the Bilt Techno 2.0 helmet
Eken H8 Action Cam / Akaso EK7000 Action Cam / Sitting cam Canon Rebel T6i with a Movo VXR10 Video Mic
New Graphics From Team Racing Graphics.com
Was shopping around for graphics for a new look so I found the Scatter graphics set on ebay from a store called MXSUPERSTORE here is the link to the ebay store: www.ebay.com/str/mxsuperstore?_trksid=p2047675.l2563
The shipping was crazy fast and the email communication was amazing, check them out if you need graphics.
I was not given these graphics I purchased them but am really excited about the seller and product so I thought I would share
I didnt use any water solution when I installed I just heated and stretched them on and it went great. You definitely need a heat gun.
Contact me at: hellastokedgarage@gmail.com
Instagram: @hellastokedgarage
Thanks for watching!
The shipping was crazy fast and the email communication was amazing, check them out if you need graphics.
I was not given these graphics I purchased them but am really excited about the seller and product so I thought I would share
I didnt use any water solution when I installed I just heated and stretched them on and it went great. You definitely need a heat gun.
Contact me at: hellastokedgarage@gmail.com
Instagram: @hellastokedgarage
Thanks for watching!
Переглядів: 969
Відео
Oil Change on The 2004 Honda CRF150F
Переглядів 4,7 тис.4 роки тому
As we did not know the last time the oil was changed on this bike it was time, good thing it was pretty nasty oil. I am using Rotella T4 15W 40 oil because I like it and it is only $13 a gallon and I use it in all our bikes except for the Indian Bobber, but I am not recommending any type or brand, just consult your owners manual. Contact me at: hellastokedgarage@gmail.com Instagram: @hellastoke...
2004 CRF250R Valve Issues Part 3_Reassembly
Переглядів 4,5 тис.4 роки тому
In less than a month the valves on Jake's 2004 CRF250R tightened up again and made it so it would not kick start. In this video we break it down and try to re shim the intake valves again to see if we could get it running. The lowest shim 1.20 still made it so we couldn't get a feeler gauge in there. Replaced the valves with stainless steel valves from Kibblewhite got the kit from Amazon see be...
2004 CRF250R Valve Issues Part 2_Head Removal
Переглядів 2,6 тис.4 роки тому
In less than a month the valves on Jake's 2004 CRF250R tightened up again and made it so it would not kick start. In this video we break it down and try to re shim the intake valves again to see if we could get it running. The lowest shim 1.20 still made it so we couldn't get a feeler gauge in there. Time to remove the head and see whats going on. Contact me at: hellastokedgarage@gmail.com Inst...
2004 CRF250R Valve Issues Part 1
Переглядів 3,6 тис.4 роки тому
In less than a month the valves on Jake's 2004 CRF250R tightened up again and made it so it would not kick start. In this video we break it down and try to re shim the intake valves again to see if we could get it running. The lowest shim 1.20 still made it so we couldn't get a feeler gauge in there. Here is the Shim Kit:www.amazon.com/gp/product/B000UKM6LG/ref=ppx_yo_dt_b_asin_title_o07_s00?ie...
Painting My Dirt Bike Wheels
Переглядів 2,1 тис.4 роки тому
The rims aluminum look was old and worn out so it needed a fresh look. I used Rustoleum spray paint and hope it holds up for a little while. Thank god Sarah got in on the straw and tape action! It was actually easier to spin it on the bucket and paint. Used those flex straws from Walmart just cut them at the flex part. Contact me at: hellastokedgarage@gmail.com Instagram: @hellastokedgarage Tha...
Trike Build #9 1st Trike Complete
Переглядів 6 тис.5 років тому
Just a quick look at the 1st completed trike. Contact me at: hellastokedgarage@gmail.com Instagram: @hellastokedgarage Thanks for watching!
Trike Build #8 TAV30 / Torque Converter Install
Переглядів 9 тис.5 років тому
This video is explaining the quick and simple install of the Ebay Knockoff TAV30 Torque Converter on the Harbor Freight Predator 212 Engine. I will go over in detail the Trike when complete. Here is where I purchased the Converter from Ebay: www.ebay.com/itm/Go-Kart-Torque-Converter-Clutch-Kit-3-4-10T-40-41-and-12T-35-Predator-212CC/311969384646?_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20160...
Harbor Freight Titanium Unlimited 200 Welder Unboxing and Setup
Переглядів 45 тис.5 років тому
Here is a video of the unboxing of my new Harbor Freight Titanium Unlimited 200 Welder. My wife picked up the welder for me for $649. Needed to try something mew as my Lincoln Weld Pack HD was not working well anymore and I wanted the ability to add an Argon bottle for shielding and to learn how to TIG weld. So I hope I am not too long winded on this one, there are a lot of other setup videos o...
Trike Build #6 PVC Sleeve Install On Tires
Переглядів 7 тис.5 років тому
This video is the installing of the PVC Sleeves on the tires once the bead is set. Since the beads are set I couldn't get them on without vacuuming the air out. Here is the link to the other dude I got the pump idea from: BaumBuilds : ua-cam.com/video/9gJQRRwEeC8/v-deo.html Here is the pump I used: Part Number 96677 www.harborfreight.com/air-vacuum-pump-with-r134a-and-r12-connectors-96677.html ...
Trike Build #5 Frame Cutting / Tacking
Переглядів 22 тис.5 років тому
This video is the cutting and tack welding one of the trike frames. I might change it since I am using torque converters as I dont like the way the engine will sit so far back. Not sure, keep watching tho! Here is the link to the other dude I got the frame idea from: Michael Cowels : ua-cam.com/video/DT4cRWhabT4/v-deo.html Contact me at: hellastokedgarage@gmail.com Instagram: @hellastokedgarage...
Trike Build #4 Wheel and Axle Assembly
Переглядів 6 тис.5 років тому
This video is the assembly of the wheels and tires and how I set up the axle assembly. Purchased the wheel and axle assemblies from BMI Karts under the Drift Trike Parts tab. I really think either these rims are oversized or the tires are too small...It was almost impossible to get these on and seated on the rims. We had to way over inflate the tires to a dangerous level to get them on and used...
Trike Build #3 Predator Engine Throttle Linkage Setup
Переглядів 17 тис.5 років тому
This video is setting up the throttle linkage on the Predator 212 engine after the governor was removed. I realized every time I mentioned "Neutral Position" I meant to say Idle Position. I was looking for videos on how best to do this and came across a video by Kart Art, check him out here: ua-cam.com/users/22ScopeCam Contact me at: hellastokedgarage@gmail.com Instagram: @hellastokedgarage Tha...
Trike Build #2 Predator 212 Engine Governor / Low Oil Sensor Removal
Переглядів 4,3 тис.5 років тому
In this video me and Jake remove the Governors and Low Oil Sensors from the 2 Harbor Freight 212 Predator Engines. Followed some tips from Reds Beard Garage video, see it here: ua-cam.com/video/0dpiWqLsuIw/v-deo.html Upcoming linkage setup video ideas came from Kart Art, see him here: ua-cam.com/video/MtXjLnwwyR4/v-deo.html
MAIL CALL!!! #5 3/11/2019
Переглядів 4365 років тому
Kyra and me opening mail from awesome subscribers in MAIL CALL #5! Thanks everybody for your support!! Please subscribe!!! Thanks for watching!!! Email: hellastokedgarage@gmail.com Instagram: www.instgram.com/hellastokedgarage Shout out to the following: Dave & Angie's Adventures: ua-cam.com/channels/rEkWtuYD1iHmbCAa6jLVaA.html The Bearded Bobber: ua-cam.com/channels/hx9i4Qf0l-Wvrt78F96Deg.html...
2002 GMC Yukon XL Alternator Swap!!!
Переглядів 4,6 тис.5 років тому
2002 GMC Yukon XL Alternator Swap!!!
Indian Dealer With Zack!!! Looking For His Future Ride!!
Переглядів 4055 років тому
Indian Dealer With Zack!!! Looking For His Future Ride!!
Sputterin Bobber!! 2018 Indian Scout Bobber Stalling Out!! WTH?
Переглядів 1,3 тис.5 років тому
Sputterin Bobber!! 2018 Indian Scout Bobber Stalling Out!! WTH?
Oil Change!!! 2014 Dodge Durango Limited V6
Переглядів 23 тис.5 років тому
Oil Change!!! 2014 Dodge Durango Limited V6
2018 RECAP!!! Hella Stoked Garage Stuff in 2018!!!
Переглядів 3015 років тому
2018 RECAP!!! Hella Stoked Garage Stuff in 2018!!!
RCX 3" Slash Cut Slip Ons First Impressions!! 2018 Indian Scout Bobber!!
Переглядів 7 тис.5 років тому
RCX 3" Slash Cut Slip Ons First Impressions!! 2018 Indian Scout Bobber!!
LED Headlight Install!! 2018 Indian Scout Bobber!!
Переглядів 23 тис.5 років тому
LED Headlight Install!! 2018 Indian Scout Bobber!!
Corbin Backrest Installation on Pillion Seat...2018 Indian Scout Bobber
Переглядів 7 тис.5 років тому
Corbin Backrest Installation on Pillion Seat...2018 Indian Scout Bobber
Corbin Pillion Seat Install...2018 Indian Scout Bobber!!!
Переглядів 27 тис.5 років тому
Corbin Pillion Seat Install...2018 Indian Scout Bobber!!!
Corbin Solo Seat Experience..2018 Indian Scout Bobber!!
Переглядів 18 тис.5 років тому
Corbin Solo Seat Experience..2018 Indian Scout Bobber!!
Corbin Solo Seat Install! 2018 Indian Scout Bobber
Переглядів 28 тис.5 років тому
Corbin Solo Seat Install! 2018 Indian Scout Bobber
The Corbin Seat Has Arrived!! 2018 Indian Scout Bobber!
Переглядів 6 тис.5 років тому
The Corbin Seat Has Arrived!! 2018 Indian Scout Bobber!
My big question is... my sons friend cracked the crankcase. I welded it and cleaned it up. Do you have to add oil to the crankcase next to the shifter?
Love the daddy daughter diy video ❤😂
Dude I know this is a little old but did your valves get stuck in the head when trying to remove? Mines been extremely difficult to remove because I dropped a valve and it smacked my piston a few times. I suspect it’s bent and jammed in the head. Should I try and pound it out?
that mailman though🤣😂
Beach bars look good on the scout too😊
how they doin now
Sorry, just noticed after looking at transcript..... you also ordered a passenger seat.
Just went to the corbin website to order a solo seat, everything black, no studs, no welts, not heated, white stitching for Corbin name..... in other words exactly like yours! The price came out to $721.00. How did yours come out to $1100.00?????
The price is ridiculous. but the look justifies it! Absolutely the most beautiful seat out there. I'm buying one next week!
Good information👍, just picked one of these up.
Great job explaining!
No excuse as to why motorcycle manufactures can't put decent seats on bikes.
Hello , do you have the dimensions of this frame? I want to do something similar
pops is funE
I cheat....I just drop in the cam and put pressure on it while checking clearances....get it close then button it up and recheck....it saves a ton of extra work
Thanks for your vid. I had the polarity wrong. Once I switched it around my welding greatly improved.
Thank you so much. This was an excellent video. I am in the process of doing the exact same thing. I thought I saw a video showing where are you got the bungs how are you installed them and how you painted the handlebars
What size tires are you running?
Are those bars lower than the mini-apes? Thanks
Perfect Video, thank you! Wasn't sure if you turned the vehicle on before you put the caps back on or if you did it before, but I will just put the caps on first incase. Thanks!
Replacing my valves now. Waiting for them to come in. Seats look good but it’s okay to lap them?
HF has the spool gun now .
Any updates after the break in period? comfort pros, cons?
Hello? I got a question… how can I get in contact with you?
I love the workshop .... in the middle of the Jim 😂😂😂 Keep up the good work. I also work on bikes but not a mac
Heavy duty diesel oil for a 4 speed dirt bike ? No overlying issues whatsoever ? Just curious because I have the same bike.
I had Scout bars installed on my Bobber before I took delivery from the dealer. I'd sat on a stock Bobber while waiting for my bike from the factory and instantly knew those short bars would have to be changed. I wouldn't have even made it home with those. Ouch.
Does your Scout bars have end mirrors?
👍👍👍👍👍👍👍👍👍🙋♂️🙋♂️🙋♂️🙋♂️
John,I really miss your videos,especially the dirt bike stuff.I hope your well.awesome channel
jesus inflation hit hard i bought the same one yesterday for damn near $900 and it was $50 off!
all that just to install your license plate? way too invasive, no thanks
Looks great what black leather is that for the seat they have a lot to choose from
Soooo let’s just say SOMEONE forgot to unplug the battery before changing the alternator…what could be some side effects
Arnt you supposed to push and not pull when mig welding and pull with stick welding ?
What length extension!
10”
That's what I had on my vrod did momma approve?
Thanks for the video very helpful
the only downside is that no consumables like tungsten, mig wire, rod etc, come with it
What size shims did y’all put in???
Good video! I have a question. I’m gonna order these same intake valves, these bikes come with titanium valves from factory and I won’t be replacing the exhaust valves like you. My question is, is it alright to run the double springs on the intake valves and not the exhaust valves ?
Hi. Whats size of frame square parts?
This video is fucking hysterical. And super informative haha. Y’all are two peas in a pod ❤
Website looks very outdated.
What size and type of bars did you use?
I accidently ordered a 30 series 1'' converter for the 212. So now I got to wait for the 3/4 inch. This was a great video with lots detail. Once I seen this, I went out and check the bolts and sure enough they were way to snugged. So once I get my new converter ill know what to have on hand when I am ready. Thank you...
I just ordered a corbin seat myself. Your right. You won't get answers online. But I put my order in online with height/weight/etc.., and then called directly after to hash out the details. Everything was groovy. Now the wait....
Hi, I have an indian scout rogue, I think this seat fits this bike. do you know if Corbin ships to Portugal?
Their website is absolute garbage. That’s what has stopped me from ordering. What they show on the site is not what they are giving you. The colors don’t match reality and they know it doesn’t.
I do agree, the only reason I knew I was getting the exact seats I wanted is because a Corbin truck was set up at Street Vibrations here in Reno so I got to see and feel what I liked
The reduced reach bars are awesome! I just got mine swapped out from stock. So much better! My back isn't hurting anymore
Absolutely incredible upgrade. It looks stunning, like it was especially made for it !!! Theres just no comparison with the stock seat, none !!!! ok, sold...Its gotta be Corbin for me too :)