Відео

You must be really jacked with all those passes with the plane haha. I didnt catch all the videos when you were first building this bookcase. This has been a great video to have on while i am working. I need to get my handtool skills up to your level, there is something satisfying about just using hand tools on a project.

Japanese style pull saws are designed to be used with *both* hands. Makes the cuts straighter. I bought the flush cut saw for a project where I wanted to cut off some dowels. BTW, you can use playing cards or a piece of package plastic between the saw & the work to prevent scratching the surface. Harbor Freight tools involve some trade-offs. Some of them need modding &/or tuning, like the chisels. Also, they aren't great but they work & the extra sharpening is good training. I also have the $6 hammer, the 3lb $10 drilling hammer, & brick, concrete, & mason's chisels for splitting wood. I have Harbor Freight hand screw clamps, c-clamps, f-style bar clamps, & spring clamps. I also have a great (very) small air compressor from the Harbor. I'm surprised to see how much of this stuff I have from HF & I have things not in the video.

Watch the entire series here: ua-cam.com/play/PL8QTMoXGB7HbFtVDAVJO3tCtzy57TmfZH.html

Thanks most of my tools are harbor freight and I built everything with them people get stuck on name brand I'm not building a space ship I'm working with wood . Cave men used a bone and a rock to build stuff. Get a life stop making brand name people richer keep some of that money for yourself 😁

I would use 1/8” rubber as opposed to the plywood more cushion

I picked up the plane double set they have because i thought i could use it for a scrub plane, but it's complete garbage. The blade still not stay in and the lever cap has a kidney shaped hole, but it's not designed properly, so when you tighten it, the screw just pushed it out out. The mouth is also so crooked and rough, it would take so much time to fix, it's really not worth it. The handles also have rough edges on the plastic seems. I tried to windsor one as well, and agree to just pass on it. It will end up just frustrating any beginner and unless you have a good understanding of how to tune a plane, it's not worth even making a scrub plane. I ended up getting the Tay Tools jack plane brand new for around $100 as my first plane and its great. If you don't have a plane and know how they are supposed to work. It's going to be difficult to but a used one that needs restoring. I also do agree with the harbor freight bar clamps, I got the 48" ones and cut a piece of fence picket to slide down the center and they work great. Most of the clamps go on sale, so I just pick up a few of whichever ones are currently on sale. The ratcheting trigger clamps work good enough, but are not as nice as most other brands, but having some of those help when you only have one hand. The only clamps i would not recommend are the pipe clamps, just invest in some Bessy or Jorgensen. Other than that, the saws all work fine, I have nice saws, but there isn't a huge difference. I think of saws as more of a consumable tool than most other tools, so i just chuck them when they get too dull or when I accidentally bend one.

I have a draw almost full of these types of flashlights I find that the flashlights that have internal batteries really dont last that long and when the internal battery goes you have to buy the whole flashlight also in some cases you can replace the battery that the cost is almost sometimes even more than the flashlight itself its such a waster . Also, if the bulb goes it's the same thing

I've been using this light since early 2023.. I use it at work every day, love laser for pointing stuff out at work(maintenance tech) also love the clip for a headlamp

This is the Olight Arkfeld pro we have at home lol. Good overview, thanks for the options.

Handy dandy tips. Thanks-

i think these are great as introductory gear.. I mean face it, camping gear is expensive today and when a novice camper can get a knife, hatchet and folding saw that will get them through their overnight camps and introduce them to a new hobby for 35 bucks or whatever then i think thats a great purchase.

Get you TrustFire MiniX3 here: www.trustfire.com/discount/MATAO10?ref=ncywqujr

Half the fun is saving up for something that relates to and enhances your hobby ...keep learning and saving ...we all start somewhere

How do you feel about Amazon Basics wood plans? I would love to get into hand woodworking ( using hand tools) and don't have a very big budget. THANK YOU for any input. And just got to your channel and love the content.

Do you have a preferred site there? Specifically comparing South Point and Pewabic. Only hesitation for South Point is I’ve heard it’s susceptible to big winds

The one thing I think was missing was some way to make holes. I don’t know what varieties of hand or power drills are at HF, but I’m sure they must have something workable for cheap.

This is such a beautiful bookcase, and to build it using only Hand Tools is amazing. Great work, this will bring so many memories for your nephew for years to come.

Thank you for this video! ❤️ I appreciate it!!

HF Japanese saw is a great first saw. The hardened teeth last a long time so beginners can learn to harness saws later if they stick with it. I probably use mine a much as any other saw I have. The others have all been sharpened at least twice since I bought the pull saw. I’ll have to check out the flush cut saw. Thanks. Marking gage, one of the first tools I ever made. They were expensive then, so I gave it a shot. Made from scrap woods and simple hardware I had on hand, Free is cheaper than HF. Of you screw out up, you can build another! It is a hobby. 🎉 Bevel gage was probably the next thing I made from a cheap plastic one. It was also a fun project. I just replaced the plastic fence with one o made from scrap wood. You do have to buy the plastic one first. I bought the smaller carving set. Upgraded to Schaaf but still use the HF ones often. HF clamps are great. Can’t beat them for the price. I don’t envision ever buying another Irwin or Pony. You don’t need hearing protection to use any of those tools or, special safety glasses. Many have lifetime warranties so if they don’t work right easy swap. Even if you eventually start using power tools, you will always value the skills you learn from using hand tools. You will often still need them to clean up and tweak power to work. One shaving with a well tuned hand plane is much easier than setting your table saw to shave 1/64” to make that sweet joint.

This is exactly how I started out and I still have and use most of it 5 years later so its not total garbage stuff

menards is a good place to get affordable tools also, If you have one near you

Also, you can find a lot of these tools nowadays at flea markets that are USA made, that are still in great working condition, Harbour Freight is a good choice also.

This is a great video, we did that same trip just a few weeks before you in June. I now love the Dakota's, though i think i prefer North Dakota over South, maybe its because there are less people haha. Cant wait to see future trips, i know my kids love getting out and taking our camper places. Seems to be the only way i can get them outside sometimes.

I never think to look at the handsaws there. I’ll have to take a look next time. I have a whole heap of the f-clamps. Best little clamps around for the price.

I had a feeling this was going to be a gift for someone. Congratulations on becoming an uncle! That kids got a really awesome bookcase that they'll hopefully hold on to for a long time.

Watch the whole series here: ua-cam.com/play/PL8QTMoXGB7HbFtVDAVJO3tCtzy57TmfZH.html

People are just full of excuses, anyone you really wants to do woodworking will find a way without spending $$$$$ this day and age its so easy to find good deals on marketplace etc , if you really want to do it its not that hard to get into the hobby

Icon is a high quality brand its not China made its Taiwan made big difference

Most of those tools they ask companies to give them for free. And surprisingly they get them

Love HF! I have made good use of their ITC membership and 30% off coupon deals.

It's all in what you can afford and/or prefer. Why buy a Filson flannel shirt 100% 24 oz wool made in the USA when you can buy a see through spandex flannel from walmart made in China? They're both flannels, Wal-Mart hires usa employees.

I wonder if this better or their Riselite chair

It really turns out to be just a Pocket Kinfe if the clip won't open to put it on your belt. And the clip really seems to small to fit a regular size belt, will find out if I can ever get it to open up enough to go onto my belt.

I think when the product is finished 17:18 it’s gonna be a work of art

My question is how much does all those clamps cost? Is it more than the bookcase itself?

Nice job on the bookcase merry Christmas from Jimmy boy

Any idea where to get one? I see the company went out of business.

Bookcase looks great. Merry Christmas to you and your family.

Watch the whole series here: ua-cam.com/play/PL8QTMoXGB7HbFtVDAVJO3tCtzy57TmfZH.html

Watch the whole series here: ua-cam.com/play/PL8QTMoXGB7HbFtVDAVJO3tCtzy57TmfZH.html

Check out the whole Bookcase Build Series here: ua-cam.com/play/PL8QTMoXGB7HbFtVDAVJO3tCtzy57TmfZH.html

Very well done, thank you. I have been into wood working for close to 4 years now. I have been to Harbor Freight many times. I have made close to 50 cutting boards, plus drink coaster sets, I have sold all of my stock, if you will. Thank you, 😊. Brent.

4:34 that bookcase is gonna be so nice when you’re done with it

Yes it feels and looks better. But did I miss the part where you improved the working part of the chisel? It's the same cheap steel it was when it came out of the box.

Love ❤️ the chair

That Hoodie looks amazing

It's a joke of a knife and I would not depend on it

You should not have to do anything

Great video.....very informational..