- 1 337
- 5 052 637
Ome.Machining
Denmark
Приєднався 1 чер 2019
Video og billeder fra mit maskinværksted.
Tips og tricks om forskellige ting relateret til faget. Feks :
- Gevindskæring
- Skift af patron på drejebænk
- Brug af brille
- Digital udlæsning DRO
- og mere vil komme med tiden..
Men alt med relation til maskinfaget - maskinarbejder & industritekniker. Men kun med manuelle maskiner.
Pictures and video from my home machine shop & my daytime job in a repair shop.
Videos on lathe operation, milling and drilling operations, and also tapping - just to mention some.
Tips og tricks om forskellige ting relateret til faget. Feks :
- Gevindskæring
- Skift af patron på drejebænk
- Brug af brille
- Digital udlæsning DRO
- og mere vil komme med tiden..
Men alt med relation til maskinfaget - maskinarbejder & industritekniker. Men kun med manuelle maskiner.
Pictures and video from my home machine shop & my daytime job in a repair shop.
Videos on lathe operation, milling and drilling operations, and also tapping - just to mention some.
Projects from the machine shop week 20 2024 HBM work and cutting allot of stock for upcoming shafts
some footage from this week in the repair machine shop
work on the TOS w100a horizontal boring mill and allot of cutting on the bandsaw
filmed as a timelapse on DJI Osmo action 4
work on the TOS w100a horizontal boring mill and allot of cutting on the bandsaw
filmed as a timelapse on DJI Osmo action 4
Переглядів: 96
Відео
Projects from the machine shop week 19 2024 short week with different machining jobs.
Переглядів 430День тому
Some footage from this week in the repair shop. only a 3 days week, so not much content still some horizontal boring mill, lathe, milling machine and welding work filmed as a timelapse on DJI Osmo action 4
Opdatering fra hobby maskinværkstedet - maj 2024 - Nu båndsav og udsugning (på budget)
Переглядів 741День тому
en kort opdatering fra værkstedet maj 2024
Projects from the machine shop week 18 2024 mass production of small parts 😊
Переглядів 81714 днів тому
Projects from the machine shop week 18 2024 mass production of small parts 😊
Digital målebånd og afstandsmåler fra Mileseey
Переглядів 11514 днів тому
Digital målebånd og afstandsmåler fra Mileseey
Projects from the machine shop week 17 2024 HBM, Lathe and milling machine work + hundreds of holes
Переглядів 1,2 тис.21 день тому
Projects from the machine shop week 17 2024 HBM, Lathe and milling machine work hundreds of holes
LokiThor AW401 - 2400 Ampere!! - jumpstarter med en masse funktioner
Переглядів 7621 день тому
LokiThor AW401 - 2400 Ampere!! - jumpstarter med en masse funktioner
Projects from the machine shop week 16 2024 - Machining on TOS HBM and picking up new lathe
Переглядів 1,3 тис.28 днів тому
Projects from the machine shop week 16 2024 - Machining on TOS HBM and picking up new lathe
Projects from the machine shop week 15 2024 machining on TOS SUS80 and TOS w100A HBM
Переглядів 1,3 тис.Місяць тому
Projects from the machine shop week 15 2024 machining on TOS SUS80 and TOS w100A HBM
Vevor elspil til bådtraileren med fjernbetjening - Første test - Pioner 15 Viking Sport
Переглядів 128Місяць тому
Vevor elspil til bådtraileren med fjernbetjening - Første test - Pioner 15 Viking Sport
Projects from the machine shop week 14 2024 Boring on HBM and Machining on Cazeneuve lathe
Переглядів 7 тис.Місяць тому
Projects from the machine shop week 14 2024 Boring on HBM and Machining on Cazeneuve lathe
Vevor elspil med fjernbetjening montere på beslag til bådtrailer
Переглядів 267Місяць тому
Vevor elspil med fjernbetjening montere på beslag til bådtrailer
Mikron WF3 tool room milling machine getting some TLC
Переглядів 671Місяць тому
Mikron WF3 tool room milling machine getting some TLC
Pinolhullet løber, - ikke 😊 Flyt ej emnet efter pinolhullet er boret..
Переглядів 322Місяць тому
Pinolhullet løber, - ikke 😊 Flyt ej emnet efter pinolhullet er boret..
Gevind på drejebænken? Brug af tap, bakke og div holdere
Переглядів 227Місяць тому
Gevind på drejebænken? Brug af tap, bakke og div holdere
Projects from the machine shop week 12 2024 - machining on the lathe and milling machine.
Переглядів 2,2 тис.Місяць тому
Projects from the machine shop week 12 2024 - machining on the lathe and milling machine.
Bilz U1 ball turning attachment - Cleaning in timelapse
Переглядів 260Місяць тому
Bilz U1 ball turning attachment - Cleaning in timelapse
Projects from the machine shop week 11 2024 - some machining on the HBM, milling machine and lathe
Переглядів 3412 місяці тому
Projects from the machine shop week 11 2024 - some machining on the HBM, milling machine and lathe
Justering af pinolhøjde - ret præcist. Multifix og Aikron A30 dro
Переглядів 3222 місяці тому
Justering af pinolhøjde - ret præcist. Multifix og Aikron A30 dro
Vevor 1800kg elspil med fjernbetjening til knap 850kr inkl forsendelse.
Переглядів 2142 місяці тому
Vevor 1800kg elspil med fjernbetjening til knap 850kr inkl forsendelse.
Projects from the machine shop week #10 2024 Bridgeport assemble, DRO mount and a shop tour
Переглядів 1 тис.2 місяці тому
Projects from the machine shop week #10 2024 Bridgeport assemble, DRO mount and a shop tour
Bridgeport milling machine table and saddle removal as a timelapse
Переглядів 4932 місяці тому
Bridgeport milling machine table and saddle removal as a timelapse
PeWetools parting blade Multifix holder - with teagutec blade is a great match for perfect parting
Переглядів 4432 місяці тому
PeWetools parting blade Multifix holder - with teagutec blade is a great match for perfect parting
Projects from the machine shop week #9 2024 - machining and Bridgeport milling machine disassembling
Переглядів 1,9 тис.2 місяці тому
Projects from the machine shop week #9 2024 - machining and Bridgeport milling machine disassembling
PeWe tools multifix size B for Victor 500x1500 lathe
Переглядів 6772 місяці тому
PeWe tools multifix size B for Victor 500x1500 lathe
Projects from the machine shop week #8 2024 - machining on lathe and milling machine
Переглядів 4332 місяці тому
Projects from the machine shop week #8 2024 - machining on lathe and milling machine
Bridgeport fræsemaskine - lidt generel info om Bridgeporten, på Dansk
Переглядів 3692 місяці тому
Bridgeport fræsemaskine - lidt generel info om Bridgeporten, på Dansk
Endoscope from PeWe-tools - with 360° rotation head and great screen resolution.
Переглядів 1622 місяці тому
Endoscope from PeWe-tools - with 360° rotation head and great screen resolution.
lovely 🏵️💞💐 machine..
Multi Multi axis machining capabilities.
👍
Why use a good piece of kit like that. Mark the circle out, put a 3 inch face mill in and run it through in various points around the circle. Then clean it out to size.
Why use it? Why not? Its build for boring jobs.. a little interrupted cut won't hurt it ..
Can't tell if we're OD cutting or just facing a thin wall...
Thought it were obvious that it's a thing sleeve mounted on the part, that's being machined on the OD
Right angle drive on a cnc milling machine and interpolate it. I can do that same job on a 12 year old Tormach better and faster than that huge machine.
Also with a workpiece load of 3000kg? I'm sure this can do allot of jobs your Tormach won't 😅
Do you mean this toy? Where the rpm drops as the spindle sees the workpiece? 😅 I can guarantee I can make this job several times faster than you can on that little 'mill' 😊 of course in a fantasy word, as yours can't handle even a 20x smaller part 😂. ua-cam.com/video/yX8CPNPHRwk/v-deo.htmlfeature=shared
I keep coming back ! Very satisfying , I wrote D’Andrea several emails about supplying me an INT30 arbor for my 120 no response , I wrote in Italian too ! Any ideas ?
You can easily swap it with a regular face mill holder. 😊 I have a video where i show how to remove the Arbor. You should be able to find one that fits your mill then 😊👍 else write again, and i will help. Best regards
@@OmeMachining this makes it more fun and i enjoyed the video already , thank you I must watch again , appreciated.
Seems like the perfect machine for that job
👍
Machine price
Not for sale?
👍
👍
Valeu!
Hey, I found this front wheel of the Flintstones mobile. Let’s see how it does on this CNC machine.
Nice way to do the shaft, why did you not gang mill the clamps?
Thanks allot. It was done in hurry. So it wasn't the best clamping method 😂. 😊👍
@@OmeMachining It was done lots of times lol as I am sure you have more than one tee nut in that vast shop. It must be English Engineering eyes that pick up these things lol
nice videos, is surprising how many of these old machines are still working in "perfect" conditions at profesional standards !!, nice, keep it coming
Thanks allot. Yes toolroom/machines do last very very long if they are properly maintained. One of ours is from 1957 😊 and the oldes lathe is from 1967. Still runs super smooth and accurate. Best regards
Tillykke med den fine båndsav 🙂 Og nu har du også en undskyldning for ikke at bruge cyklen 😉
Mange tak 😊👍. Ja det er rigtigt 😂 får ikke brugt den så meget. Det er en jeg har arvet, fra min bedstefar. Så den har lidt affektionsværdi 😊
Even though I don't know your native language, I really like your shop and your content. I have one of those Ideal band welders that I retrofitted to my DoAll 1612 bandsaw. When I got the saw, somebody had removed the original welder. Thanks.
Thanks allot for your kind words. Much appreciated. Nice you got a welder as well. I think they were sold to many different manufacturers over the years 😊
👍
Abertura de furo na mandrilhadora.
氣切粗胚圓孔用粗銑刀先繞一圈。
On a manual machine ?
❤❤
The job is boring indeed. Jhst like a speech from Biden, Schiff or Schumer.
Use a spiral point for a thru hole
Yes 😊 we have both. But this was already in the holder, so... You know, lazy as we can be 😂
That material looks nasty
I don't know what the ultimate dimensions are supposed to be, but it looks like you have enough time to read an entire book on your phone while you sit there and wait lol thank God for Bluetooth headphones and Spotify or I would probably go insane doing this type of work
Each pass takes ~ 8 mins. Then i have to reverse and adjust the boring head to another size. Then I'll run another pass. So I don't have that much free time 😂
@@OmeMachining yeah I didn't know I was more being sarcastic because some ops I run are as low as 17 seconds and others can be as high as 55 or even 60 minutes long depending on the part you know how it goes
👍
Que tal son estos tornos en calidad.Que dificultades presentan?
They are some of the best ever build
I’ve had boring jobs-
dancable! HEY!HEY!HEY
Thisbis the slowest way to do this job
What would be faster then ....
Idk whats so boring about it looks pretty exciting to me
Hey buddy, the eighties called. They want their mill back.
😂😂😎💪
The masters of contouring spindles are Trevisan machines. The DS 600 could undercut this rough stuff in one pass. I've taken up to .68 in. per side at .02 in. per rev. The only reason i couldnt take more is because that's all a cnmg643 insert can take.
Essa fresa é top, aqui no Brasil é conhecida como fresa espigão, uma referência ao milho 🌽
"what a boring video" - every dad ever.
That birds nest got to go
Nice HBM. That is one big angle plate.
Sometimes you can blow stuff off with compressed air provided it hasn't been allowed to get too long and wrap itself around the drill. Basically locking itself on play around with your speeds and feeds because nobody likes dealing with the weed wacker from hell
Love your work Rasmus. You do some incredible work over and I appreciate you sharing it with us. Regards, Aaron.
Thanks allot my friend.. appreciated 😊👍🙏 hope you are doing well 😊 warm regards Rasmus
How boring lol
I find the recordings well done and the music quite relaxing. But what I would be interested to know is what is the star-shaped monster, what is it for, or what machine is it installed in? Since I read that you don't want to do a voiceover (which I can completely understand), I would suggest putting the explanations in the subtitles.
If you got rid of the music and slowed it down, then gave the viewer some info about what your doing and why your doing it , you have lots of potential
Thanks for your feedback. I can't do it without music, as real sound would be with high music from mainstream radio. So would have copyright issues. You are right about the information is lacking. I sometimes assume people can tell on their own, but obvious it's not easy for all. ☺️ I have thought about filming real time, with voiceover. But it's super time consuming for me, and the video files would be very big, and currently hard for me to use/edit. I still hope it's worth watching and isn't too boring. I do get your points, and I do watch some machinists here as well. Some take like forever to show and tell what takes 5 minutes to do. So I quickly turn away. But I think it's a balance of good content, showed and described relatively quick, for all to understand ☺️ I will try to do it better in future
This is boring. Really boring. It’s the most boring video I’ve watched all day…
Now Mount you a seat onto it and drink a beer
IDK, I think it would be faster if you left the table in one spot and flipped the parts.
It would. But the parts is just cut to circa length in the bandsaw, So it can't be done that way.
Nice machine