TONELAB Quick-Tips
TONELAB Quick-Tips
  • 47
  • 69 784
Sample Packs for Emu & Rossum SP1200 Samplers
The most famous Drum Machine of them all! ..Roland's 1980 classic TR-808! Meticulously recorded through a Neve 1073 Pre-Amp into an SSL console via Mogami Gold cables, into the original 1987 Emu SP1200, then transferred across into the Rossum.
store.tonelab.au/en-aud/collections/rossum-sp1200
Digital downloadable file includes:
A folder containing a '.txt' instruction file, a HFE virtual disk image (for Emu SP1200's equipped with a Gotek / Lotharek Floppy Drive Emulator which you can copy onto your removable media and load into your Emu SP1200). There's also '.syx' (System Exclusive) files (for owners still using Physical 3.5" Floppy Disk Drives) containing 2x Kicks, 2x Snares, 2x Closed Hats, 1x Open Hat, 1x Cymbal, 1x Rim Shot, 1x Clap, 1x Low Tom, 1x Mid Tom, 1x Hi Tom, 1x Low Conga, 1x Mid Conga, 1x Hi Conga, 1x Cow Bell, 1x Clave, 1x Maraca.
Note: Distortion & Reverb was used in the first 18 seconds of this clip.
Available now in Emu/Rossum SP1200 as well as ASR, Ableton, Logic & MPC Sampler formats
from the TONELAB store 🛒 💾
You'll also find 606, 707, 909, 626, CR68 & DX (DMX) kits already to load & play! .. I'm really happy how these turned out, they sound great, plus.. a LOT of fun to mess with - definitely worth the effort!
SP1200 Comprehensive Tutorial
ua-cam.com/video/fJllMiVqL3U/v-deo.html
SP1200 Quick-Tip Playlist
ua-cam.com/play/PLQHHMk36O_qM6_c8RX65odAIFX32_z5FN.html
Feel free to Like, subscribe, drop a line and check out Tonelab here too 🤙🏻
instagram @tonelab
facebook @tonelab.tv
#beatmaker #808 #sp1200
Переглядів: 358

Відео

808 Drums Sample Pack for the Akai MPC3000, ASR-10, SP-1200 and more!
Переглядів 2212 місяці тому
The most famous Drum Machine of them all! ..Roland's 1980 classic TR-808! Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables, into the converters of the original MPC3000 (which many say.. is the best sounding MPC). This way, you get the reproduction of an original 808 that utilizes, arguably the best converters, from the MPC series, to offer a rich tonality and dynamic ran...
808 Drums Sample Pack for the Akai MPC4000
Переглядів 2052 місяці тому
The most famous Drum Machine of them all! ..Roland's 1980 classic TR-808! Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables, into the converters of the original MPC3000 (which many agree.. is the best sounding MPC!). Then 'those sounds' are loaded into the 4000, for a custom 'fit and configuration' into a native 'MPC4000 Program'. This way, you get the reproduction of an ...
Roland 909 Drums Sampled through MPC3000 converters for the MPC X, Live, etc
Переглядів 2022 місяці тому
From 1983, behold.. Roland's classic TR-909 Drum Machine! Used on countless House & Techno records. Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables, into the converters of the original MPC3000 (which many agree.. is the best sounding MPC). Then 'those sounds' are loaded into the MPC X, for a custom 'fit and configuration' into a native 'MPC X Program'. This way, you get...
909 Drum Kit for the Ensoniq ASR-10 Sampler
Переглядів 1502 місяці тому
From 1983, behold.. Roland's classic TR-909 Drum Machine! Used on countless House & Techno records. Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables into the converters of the original Akai MPC3000. Then, those sounds, are imported into the ASR-10, for a custom 'fit and configuration' into a native 'ASR-10 Instrument'. This way, you get a reproduction of an original 909 ...
808 Drum Kit for the Ensoniq ASR-10 Sampler
Переглядів 2682 місяці тому
The most famous Drum Machine of them all! ..Roland's 1980 classic TR-808! Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables, into the converters of the original MPC3000! Then, those sounds, are imported into the ASR-10, for a custom 'fit and configuration' into a native 'ASR-10 Instrument'. This way, you get a reproduction of an original 808 that utilizes the analog to di...
Oberheim DX Drums recorded into an MPC3000 then imported into Ableton Sampler
Переглядів 1122 місяці тому
Oberheim’s classic drum machine from 1980, the DX, the younger brother of the infamous DMX, think Salt n Pepa, Run DMC. Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables into the converters of the original Akai MPC3000. Then those sounds 'dumped' into Ableton's 'Sampler', for a custom mapped configuration. This way, you get a reproduction of an original DX that utilizes t...
909 Drums recorded into an MPC3000 then imported into Ableton Sampler as a Drum Kit
Переглядів 4412 місяці тому
Behold from 1983 Roland's classic TR-909 Drum Machine! Used on countless House & Techno records. Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables into the converters of the original Akai MPC3000. Then those sounds 'dumped' into Ableton's 'Sampler', for a custom mapped configuration. This way, you get a reproduction of an original 909 that utilizes the 'analog to digital'...
808 Drums recorded into an MPC3000 then imported into Ableton Sampler
Переглядів 2642 місяці тому
The most famous Drum Machine of them all! ..Roland's 1980 classic TR-808! Meticulously recorded through a Neve 1073 Pre-Amp via Mogami Gold cables, into the converters of the original MPC3000! Then those sounds 'dumped' into Ableton's 'Sampler', for a custom mapped configuration. This way, you get a reproduction of an original 808 that utilizes the 'analog to digital' converters inside the MPC3...
Ensoniq ASR-10 Sampler: How to Step Edit Sequence Tracks
Переглядів 768Рік тому
In this clip, we take a look at how you can 'Step Edit' your Sequences on the Ensoniq ASR-10 / EPS Operating System. Highly recommended for any ASR / EPS owner! Additional information: The 'DUR' field is the duration / 'note length'. You can set the duration of your note in measures of 'BEATS' and / or 'CLKS' (Clock Ticks) by adjusting the values of those fields, as demonstrated in the clip @5:...
Ensoniq ASR-10 Sampler: What are MACROs and How to use them
Переглядів 771Рік тому
In this clip, we take a close look at 'what is' an Ensoniq ASR-10 Macro.. how we use them.. and what else we can do with them. A must see, for any ASR owner using SCSI devices. Download 'ready-made' Kits for SP1200, ASR, MPCs and more from TONELAB! store.tonelab.au/en-aud/collections/asr-10 Ensoniq ASR10 Tutorial - ua-cam.com/video/hZ8VPWOY7tc/v-deo.htmlsi=GcRFAWY3LziYiXws Ensoniq ASR Loop Calc...
Use the Roland TR909 Drum Machine as a MIDI Sequencer
Переглядів 2 тис.Рік тому
There's a parallel universe that exists within the TR909! ..well, sorta.. it actually possesses a cool little Drum Sequencer that you can use to 'trigger' MIDI Samplers, Synths and other Drum Machines! Speaking of classic Drum Machines.. Check out TONELABs Ready-Made 'Kits' for SP1200, ASR, MPCs and more! store.tonelab.au If you like what you saw, then why not check out the parent channel: yout...
TR606 Drums for Ensoniq ASR-10 from Tonelab #606 #drummachine #shorts
Переглядів 164Рік тому
Finally, here's the teaser for the Ensoniq ASR-10 TL606 kit. Digitized meticulously from the original TR808 via Mogami Gold cables thru a Neve 1073 pre-amp available now exclusively via the TONELAB Store for MPC's, ASR & SP1200. store.tonelab.au You'll also find 626, 707, 808, 909 & DX (DMX) kits available to download & play instantly! ..check out the video-demo's on each kit, you'll see quite ...
Loading SP-1200 Sounds on the Emu and Rossum Samplers
Переглядів 1 тис.Рік тому
Loading SP-1200 Sounds on the Emu and Rossum Samplers
How to Save Tempo on the Rossum / Emu SP 1200
Переглядів 542Рік тому
How to Save Tempo on the Rossum / Emu SP 1200
Transfer Sounds & Sequences from the Emu SP1200 to Rossum SP-1200
Переглядів 679Рік тому
Transfer Sounds & Sequences from the Emu SP1200 to Rossum SP-1200
Using SD Cards with the Rossum SP1200
Переглядів 3,3 тис.Рік тому
Using SD Cards with the Rossum SP1200
Cycle your loops to fit any Tempo Clip Launcher style on the Akai MPC2000XL
Переглядів 2,9 тис.Рік тому
Cycle your loops to fit any Tempo Clip Launcher style on the Akai MPC2000XL
Akai MPC X ONE LIVE Multi Track Recording and MIDI Import Hack
Переглядів 2,4 тис.2 роки тому
Akai MPC X ONE LIVE Multi Track Recording and MIDI Import Hack
Cycle your Loops perfectly to any Tempo on the Akai MPC
Переглядів 3,2 тис.2 роки тому
Cycle your Loops perfectly to any Tempo on the Akai MPC
Cycle your loops to any Tempo with the Ensoniq ASR-10 Sampler
Переглядів 3,1 тис.2 роки тому
Cycle your loops to any Tempo with the Ensoniq ASR-10 Sampler
How to Quantize Loops on the Emu Rossum SP1200
Переглядів 2,3 тис.2 роки тому
How to Quantize Loops on the Emu Rossum SP1200
Control the Akai S950 or S900 Filter with MIDI
Переглядів 5 тис.2 роки тому
Control the Akai S950 or S900 Filter with MIDI
How to set up the SP1200 with an Akai S900 / S950 Sampler
Переглядів 8 тис.2 роки тому
How to set up the SP1200 with an Akai S900 / S950 Sampler
DOUBLE your Sampling time on the Emu or Rossum SP1200
Переглядів 4,4 тис.2 роки тому
DOUBLE your Sampling time on the Emu or Rossum SP1200
Set up the Akai MPC4000 to use 10 Individual Outputs
Переглядів 1,6 тис.2 роки тому
Set up the Akai MPC4000 to use 10 Individual Outputs
Set up the Akai MPC2000XL to use 10 Individual Outputs
Переглядів 3 тис.2 роки тому
Set up the Akai MPC2000XL to use 10 Individual Outputs
Set up the Akai MPC3000 to use 10 Individual Outputs
Переглядів 1,2 тис.2 роки тому
Set up the Akai MPC3000 to use 10 Individual Outputs
Trimming Samples on the Rossum or Emu SP1200 alternate method
Переглядів 2,3 тис.2 роки тому
Trimming Samples on the Rossum or Emu SP1200 alternate method
Sync the Rossum or Emu SP1200 using SMPTE time code
Переглядів 1,8 тис.2 роки тому
Sync the Rossum or Emu SP1200 using SMPTE time code

КОМЕНТАРІ

  • @djsonnymotto9979
    @djsonnymotto9979 11 годин тому

    You left out the congos.. I'm from that era

  • @jeanmicheljarret6097
    @jeanmicheljarret6097 17 днів тому

    Hello Tonelab your tutorial are priceless, I have ordered a Rossum SP1200... Do you know if EMXP works with the Rossum ?

    • @tonelabqt
      @tonelabqt 17 днів тому

      Thanks very much 🙏🏻 ..haven't tried it myself, but I've read about people using EMXP with SP12's.. so, I presume so! 👍🏼

    • @jeanmicheljarret6097
      @jeanmicheljarret6097 16 днів тому

      @@tonelabqtcan you tell me what’s inside the rossum sp1200 sd card ? Is there « kits » ?

    • @tonelabqt
      @tonelabqt 16 днів тому

      Yes. The default kits. Alternatively, you can also find some Kits of vintage Drum Machines from my collection here 🙏🏻 store.tonelab.au/en-aud/collections/sp1200

    • @jeanmicheljarret6097
      @jeanmicheljarret6097 16 днів тому

      i already bought two of them, the 909 and her little sister the 707. Now i am waiting for the SP to be shipped. Rossum website indicate late december, then i have to pay for the international taxe… but in the end, and with your help, i’ll reach my most dreamed musical instrument.

    • @tonelabqt
      @tonelabqt 16 днів тому

      @@jeanmicheljarret6097 Fantastic.. you'll have lots of good times with it. Be sure to post some of your beats in the SP1200 forums on facebook 🙏🏻

  • @paulboobyer3833
    @paulboobyer3833 26 днів тому

    The filter is so sweeeeet. You can get some of the control back on the sample velocity loudness by going to the midi menu 04 and change loudness to ON - then you can control the loudness of it with CC7 from a sequencer of your choice.

  • @freshmenclassalegendcyreco6606
    @freshmenclassalegendcyreco6606 Місяць тому

    Once yu have your loop hit parameter key it will show yu the b.p.m.

    • @tonelabqt
      @tonelabqt 29 днів тому

      Sure.. but it's not all that accurate.

  • @curtis2299
    @curtis2299 Місяць тому

    Food for thought if it’s for you. Wouldn’t it be nice to be able to use the combined 26 outputs of my 3000 (10 outs) My old 950 (8 outs) And my ASR 10 (8 outs?) My main interface has 8 in’s I also have an old DP88 with 8 in’s. Plus an old partially obsolete Safire pro 40 that was collecting dust. Another 8 ins. “But how do you hook them all up?” Main interface has two sets of optical I/O Take optical out from the DP and the Safire and go into the two inputs. Then go SPDIF OUT to computer from main interface. Fun Fun Fun! Never throw away old interfaces. You can get saffires for $150 bucks.

    • @tonelabqt
      @tonelabqt Місяць тому

      I can't remember if the DP88 has 2 independent ADAT inputs or whether they combined to cater towards/allow 96kHz. But, if you 'flash' the 'state' of the Saffire settings to act as a 'stand alone', then you could use that as an ADAT-adc to feed one of the DP88's ADAT inputs. Then, with the DP88 configured 'neatly', you might be able to capture 16 (2x ADAT streams) into the DP88 + it's own 8 as analogue for a grand total of 24. Then your computer could capture all 24 separate tracks rather than the summed 2-stereo S/PDIF 'out'. 👌🏼

  • @the16thLeVel
    @the16thLeVel Місяць тому

    Can you do a tutorial on directories please?

    • @tonelabqt
      @tonelabqt Місяць тому

      I cover Directories in the intro tutorial. Try this it's queued up the chapter 🙏🏻 ua-cam.com/video/hZ8VPWOY7tc/v-deo.html

  • @MLochMusic
    @MLochMusic Місяць тому

    Suce my stupidity. This has me confused. So are you sampling a sound that say took 1 second of RAM. Then making a copy of that sound so it doesnt take up another second of RAM. IE two identical samples for 1 second of RAM?

    • @tonelabqt
      @tonelabqt Місяць тому

      Kinda yes.. but by default the 'Copy' feature will create a 'linked duplicate' to the original (of the copy). So this clip demonstrates how to get around that so you can 'edit' a copy 👍🏼

    • @MLochMusic
      @MLochMusic Місяць тому

      @@tonelabqt hi thanks. So you basically have two samples for the ram price of one that you can edit separately? Ie different decays and volumes and such?

    • @tonelabqt
      @tonelabqt Місяць тому

      ahh no.. you can have 2 for the price of 1.. but, if you wanna edit your '2nd', you have to run this trick 🙏🏻

    • @MLochMusic
      @MLochMusic Місяць тому

      @@tonelabqt Ah right. I thought that was too easy. Mind Im certain that an Akai I owned decades ago could copy to a unique self contained copy. Something like an S1000 perhaps. Was a superb feature. Unless I dreamed it all

    • @tonelabqt
      @tonelabqt Місяць тому

      Sure.. the majority of Samplers didn't have this 'caveat' and some, like the ASR-10, allow for 'both'.. as in create 'physical' copies.. or duplicate 'by reference' to an original Sample 👍🏼

  • @tonelabqt
    @tonelabqt 2 місяці тому

    Download ready-made Drum Kits for SP1200, ASR, MPCs and more from TONELAB store.tonelab.au

  • @tonelabqt
    @tonelabqt 2 місяці тому

    Download ready-made Drum Kits for SP1200, ASR, MPCs and more from TONELAB store.tonelab.au

  • @tonelabqt
    @tonelabqt 2 місяці тому

    Download ready-made Drum Kits for SP1200, ASR, MPCs and more from TONELAB store.tonelab.au

  • @iannieman
    @iannieman 2 місяці тому

    Awesome!

  • @michaelrasmussen8590
    @michaelrasmussen8590 2 місяці тому

    Thanks for the fantastic video tutorial-it was clear, concise, and super helpful! Would it be safe to assume that the process for connecting the Rossum SP-1200 reissue to a Akai S-950 would be the same?

    • @tonelabqt
      @tonelabqt 2 місяці тому

      Thanks very much 🙏🏻 ..in answer to your question.. "It's exactly the same for the Rossum" 🫡

  • @culturemax234
    @culturemax234 2 місяці тому

    🖤

  • @contactnoise
    @contactnoise 2 місяці тому

    Do you have links to SCSI Hard Disk options?

    • @tonelabqt
      @tonelabqt 2 місяці тому

      Yep, this is a great option for an ASR.. samplerzone.com/collections/zuluscsi/products/zuluscsi-v11

  • @clarencejeyofficial
    @clarencejeyofficial 2 місяці тому

    Just purchased the Akai 4000 version of it so I can use the Wav files. Nice sounds!

    • @tonelabqt
      @tonelabqt 2 місяці тому

      🙏🏻🙏🏻

  • @gasparpini
    @gasparpini 2 місяці тому

    Please can you make a Bitwig version? It’s very useful friendly for ableton users! Thank you so much for all your work 👏👏

  • @AriestheLegendRVA
    @AriestheLegendRVA 2 місяці тому

    Ableton!!! It has saved me so many times lately with time stretching old material to fit a click!

    • @tonelabqt
      @tonelabqt 2 місяці тому

      Yep, I use it for the same reason 👌🏼

  • @jayjohnson9894
    @jayjohnson9894 2 місяці тому

    Can I load sounds from the mpc x to the sd card that came with the 1200

  • @Simair78
    @Simair78 2 місяці тому

    So basiclly when you make a track and you have the 8 outs you better always set the sound levels (mix)direct in the INDIV tab? Otherwise if you do this in the stereo tab and you want to track out, you have to "copy" it all from STEREO to INDIV and when you track it out then all stereo needs to be down except i you use 9 and 10 with a stereo sample? Guess a template with all channels set and done would be the best?

    • @tonelabqt
      @tonelabqt 2 місяці тому

      Correct. Although, a 'Template'.. while good in theory.. probably won't work too well for various changes in Sample levels... unless, that is, you use the same Samples each time 👍🏼

    • @Simair78
      @Simair78 2 місяці тому

      @@tonelabqt i would say sample chops in bank A those over the stereo out channel and bank B for drums and bass. I always place my kick, ghost kick, snare, hh, ect on the same pads so those would like be "locked in" on the same outs. I will try this out 🙂 But the stereo out "hack" you explained for extra 9 and 10 are a very nice and usefull!!

  • @dstrats
    @dstrats 3 місяці тому

    Will that work for an original EPS?

    • @tonelabqt
      @tonelabqt 3 місяці тому

      Unfortunately, no. 🙏🏻

  • @jayjohnson9894
    @jayjohnson9894 3 місяці тому

    Are these on sd card

    • @tonelabqt
      @tonelabqt 3 місяці тому

      "These" ?! 🤔 not sure what you mean. But, you can find sounds for the SP via the link below.. and put them on the SD card using any Mac / Windows computer. PS. They come with instructions too 🙏🏻 tonelab.merchi.co/products/?category_id=264

  • @jayjohnson9894
    @jayjohnson9894 3 місяці тому

    Is there a sound library on sd card for the 1200 The that comes with the 1200, is that the only card I can use with the 1200

    • @tonelabqt
      @tonelabqt 3 місяці тому

      No. Check out the Disk section in the full tutorial for more about it 🙏🏻 ua-cam.com/video/fJllMiVqL3U/v-deo.htmlsi=ycjjHK1gKkZ94Jsz

  • @repstos
    @repstos 3 місяці тому

    Thanks for this. Excited to try it out.

    • @tonelabqt
      @tonelabqt 3 місяці тому

      🙏🏻👌🏻

  • @Ripe143
    @Ripe143 3 місяці тому

    Dope I didn’t know this. I just add a sequence to the song mode and it saves the tempo when I reload

  • @richarddenahy8574
    @richarddenahy8574 3 місяці тому

    I have my sounds on each pad. i go into the mixer section and i get zero change in volume. is there something that i am missing that i need to switch on ?

    • @tonelabqt
      @tonelabqt 3 місяці тому

      Depends which Outputs you're using.. Check your Stereo Mixer and the Individual Output Mixer 👍🏼

  • @GoldynChyld
    @GoldynChyld 4 місяці тому

    I have an MPC 5000. I just invested (then returned it) a Focusrite 18i8 (8 input) soundcard which was an upgrade to use the 8 individual outputs on MPC. I noticed when I route each sound in “mixer” mode, the levels drop drastically almost to a point I can’t hear them. Even the bass completely disappears. I got frustrated and returned the stuff I bought thinking this isn’t gonna work right. Is this a common case when routing your sounds to mono outputs? Such as snare, kick, hats, bass? And also I leave the sample on “L/R” in the outputs to keep the stereo sound of it. When I tried tracking it was picking up the other sounds on the stereo channel. It was a mess all around trying to figure this out. Any suggestions? I know the 5000 is a different machine than the classic vintage XL. But maybe you have some general insight?

    • @tonelabqt
      @tonelabqt 4 місяці тому

      The Main Output has a different signal path to the 8 individual output board, and.. it also 'sums' 8 channels into a pair. So, effectively it's 'combining' 8 channels, which is likely reducing the dynamic range.. and that could be what you're hearing. But, check your XL Mixer's 'Set Up' page to see if adjusting the output level helps. If you're not sure how to do that check this tutorial for that 👍🏼 ua-cam.com/video/ZdI27rV0OJk/v-deo.htmlsi=208V8rDOiDlKrJCG

    • @GoldynChyld
      @GoldynChyld 4 місяці тому

      @@tonelabqt Gratitude on your response. Thank you much! So the MPC in use is the 5000. The Mixer setup is slightly different than the 2KXL. There isn’t a separate tab for stereo and indiv. outs on the 5000. Everything is assigned via stereo “L/R” or 12, 34, 56, 78, or 1-8 mono on the same mixer screen labeled “Program Mix”. So it sounds like if I want to use “L/R” stereo outs as 9/10 it would have to be isolated but unfortunately everything assigned is in one screen so therefore it seems like my L/R stereo outs will still pick up the 1-8 assigned tracks which it did unfortunately. As far as the db output volume I will double check that in “Setup” and see if there is an option to boost the indiv. 8 outs volume. Thank you for that reminder as well! Also, if lets say Pad A01 is a stereo sample chop and I assign it to 1/2 output, does it automatically make output 1 and 2 left and right? Or do I have to assign that same sample on pad A01 to another pad, assign 1/2 again to that and pan A01 far right and the other copied sample to the other pad hard left? That is where I am getting so confused reading in these forums everywhere. Sorry if I sound like I’m asking too much lol. Hopefully I broke my questions down simply as possible. Thanks in advance again

    • @tonelabqt
      @tonelabqt 4 місяці тому

      IN the event you have a Stereo Sample, which you allocate to say, for example.. 1&2 (A stereo sample will only ever 'Pair' across 2 channels).. regardless of other samples, that may be 'Mono', also assigned to 1 or 2, or any other output for that matter.. you'll still be able to assign a Stereo Sample to any pair. The fact that a Stereo Sample accommodates an output-pair, does not mean a Mono Sample will 'not' be able to be applied to either Left or Right of that Pair. You just have to keep your Mono Samples 'out' of that pair.. otherwise those Mono Samples will appear either hard Left or hard Right.. depending on, whether or not, you have your Mixer 'Panning' those Stereo pairs hard left or right. 🙏🏻

    • @GoldynChyld
      @GoldynChyld 4 місяці тому

      @@tonelabqt Thank you for clearing this up! Appreciate you

    • @GoldynChyld
      @GoldynChyld 4 місяці тому

      @@tonelabqt My final question would be, how can I use the stereo outputs “L/R” as 9 & 10 without assigned outputs 1-8 bleeding into it? I know the 2000XL has a separate stereo tab in the “mixer” options. However, the MPC 5000 has all assignable outputs options all in one screen. So you select every channel as “L/R” or 12,34,56,78 or 1-8. I’m guessing there isn’t an option on the 5K to use stereo outs as 9 & 10 without other assigned 1-8 bleeding into the recording of “L/R”

  • @robertcrystals
    @robertcrystals 4 місяці тому

    Can you copy a sample to a new pad and delete the original? I swear it's how I used to do it to just move samples, but can't check atm.

    • @tonelabqt
      @tonelabqt 4 місяці тому

      You can copy sounds.. but you can't edit the copy as the copy refers to the original, however, in saying that.. if you delete the original.. the 'copy' then becomes 'editable' as it's no longer a 'copy' 👍🏼

    • @robertcrystals
      @robertcrystals 4 місяці тому

      ​@@tonelabqt Thought so! yeah, when you load up your samples and want to make space, this is what i'd do. Tried it tonight and it worked.

  • @benjaminleinen
    @benjaminleinen 4 місяці тому

    Whoever came up with the idea, and I’m guessing it was Marley Marl or Paul C, was a genius

  • @StudioOOMZ
    @StudioOOMZ 5 місяців тому

    just need a tr909!

  • @beataddiktgodd
    @beataddiktgodd 6 місяців тому

    👌🏾👌🏾👌🏾

  • @asiwas
    @asiwas 6 місяців тому

    Is it possible to delete files and folders? If so, what’s the best way to do it? On the Rossum or on the computer? Thank you for the great videos. SO helpful!

    • @tonelabqt
      @tonelabqt 6 місяців тому

      Thanks very much 🙏🏻 ..if you have a computer, it is a lot easier to manage Files and Folders. As a rule, I always keep Files and Folder names 'short'.. and without using any 'spaces' or 'characters' that the SP may not be capable of displaying 👍🏼

    • @asiwas
      @asiwas 6 місяців тому

      @@tonelabqt Thank you so much! Ever changed file names on the computer? And then tried to load the renamed files? Scared to try. LOL.

    • @tonelabqt
      @tonelabqt 6 місяців тому

      @@asiwas Yep, I renamed all the Kits on my store, prior to listing them.. didn't have any issues 👍🏼

  • @123Blint
    @123Blint 6 місяців тому

    naw you killed that

  • @newseneus
    @newseneus 6 місяців тому

    Can I save a sound on its own? How do I create an already existing image file in my directory?

    • @tonelabqt
      @tonelabqt 6 місяців тому

      Q1. If you have 1 sound in the SP memory, you can save that on it's own. Q2. Use the Disk Module option #0 - watch this clip for more ua-cam.com/video/fJllMiVqL3U/v-deo.htmlsi=Z23fcnHdolB4z7Av&t=1645 🙏🏻

    • @newseneus
      @newseneus 6 місяців тому

      I’ll try and remember to always hit 0 and create a folder/ file when I start each session.thanks

  • @ming-artoflight2761
    @ming-artoflight2761 6 місяців тому

    Hi, I m wondering, can you use the Rossum SD card and load these sounds into the Akai MPC x (SE)?

    • @tonelabqt
      @tonelabqt 6 місяців тому

      Nnnnnn.. well, technically.. with the right Windows OS, and some old software, you could 'rip' the samples from 'SP1200 disk images' as WAVs. Then, you could load those WAVs into an MPC. So, it is possible.. if you have the right stuff👍🏼

    • @ming-artoflight2761
      @ming-artoflight2761 6 місяців тому

      @@tonelabqt ok, thank you. So it’s not possible to insert the disk into the MPC x se directly, that would be a dream. Workflow is great on the MPC x se,

    • @tonelabqt
      @tonelabqt 5 місяців тому

      No, but.. I created an XPM (MPC Program) for the SP1200. Each MPC Bank & Pad number.. relates to the 'same' Bank & Pad number on the SP1200. MIDI cable 'Out' of the MPC.. into your SP1200. Select a MIDI Track, on your MPC.. assign MIDI Channel 1 and away you go! 👌🏼 Download it here FREE 🙏🏻 www.dropbox.com/scl/fi/2yox49of1hotm8bzydsz9/SP1200-TL-MIDI.xpm?rlkey=hzl7ulwpj1ac1xyre1c1ki3qa&st=xmir55mi&dl=0

  • @stephenwarnell7003
    @stephenwarnell7003 6 місяців тому

    Does this work for the Ensoniq EPS classic

    • @tonelabqt
      @tonelabqt 6 місяців тому

      The 'concept' will. But, I'm unsure of the EPS Classic's Sample Rate... so, what you can do is.. use the S900 / S950 calculator.. and manually key in your Sample Rate. Here's the link to it here 👍🏼 tonelab.tv/bpm2vrsc.html

  • @Harzurner
    @Harzurner 7 місяців тому

    Best sampler ever made.

  • @wanderleisumo
    @wanderleisumo 7 місяців тому

    Oh snap! i just found out what is the sound before "Mental Stamina" by Jeru, thank you sir. ua-cam.com/video/nVmDe6fDQ9k/v-deo.htmlsi=09nCbbq02_nfsQYz

  • @alessandrocarta7722
    @alessandrocarta7722 7 місяців тому

    thankyou

  • @DjRaWsOn
    @DjRaWsOn 7 місяців тому

    Hi, do you know how to transfer hfe files to the rossum? I have a og sp1200 with sd card reader and looking to transfer my projects to the rossum. Thanks

    • @tonelabqt
      @tonelabqt 7 місяців тому

      The Rossum can load HFE's 🙏🏻

    • @DjRaWsOn
      @DjRaWsOn 7 місяців тому

      Yes I’ve read that it can. But when I put my sd card inside it from my og it says no card inserted?

    • @tonelabqt
      @tonelabqt 7 місяців тому

      Then it's possible your SD card is an unreadible 'format'. Transfer your HFE files to another SD card, formatted as FAT32 🙏🏻

  • @maufromtheplanetearth9722
    @maufromtheplanetearth9722 7 місяців тому

    nice video, did exacly as you did.. but do you have any issues when tracking same value notes? laying chords or melodies with same value notes (like a C3, E3, G3) causes them to cut off despite them being on their own respected Midi channel. Running off ableton with an mpc live 2.

    • @tonelabqt
      @tonelabqt 7 місяців тому

      No, but I do remember that bug with 1 specific OS.. unfortunately I can't remember what it was... if I had to guess 2.14 perhaps?! ..so, either downgrade to the previous version, or go up.. that is.. if your Computer OS is compatible with it. Check out this page to check out whether or not your OS supports those versions 🙏🏻 support.akaipro.com/en/support/solutions/69000431967

    • @maufromtheplanetearth9722
      @maufromtheplanetearth9722 7 місяців тому

      @@tonelabqt 2.14 is the current mpc firmware, I should downgrade then? I'm also on windows 11 if that matters thanks!

    • @tonelabqt
      @tonelabqt 7 місяців тому

      Yeah, I can't remember.. maybe 2.10.4.. I ended up downgrading. So, if you can't go forward go back a version 👍🏼

  • @asiwas
    @asiwas 7 місяців тому

    Is there a way to do this if you only have your floppies from the old SP and not the machine itself?

    • @tonelabqt
      @tonelabqt 7 місяців тому

      Yeah, if you have the 3.5" Disks.. you could source a Windows PC, with 3.5" Disk Drive.. and use OmniFlop to convert your SP Disks to Image Files. The Rossum can load image files of that nature 🙏🏻

    • @asiwas
      @asiwas 7 місяців тому

      @@tonelabqt Thanks so much for taking the time, I really appreciate it. Would LOVE to see you do a tutorial on it. I can't be the only one in the same sort of quandary. Also, just to confirm, this operation can't be done on a Mac? Thanks again for your help!!!

    • @tonelabqt
      @tonelabqt 7 місяців тому

      If you can find OmniFlop for Mac, then I'm sure it could.. but, from what I understand.. OmniFlop is a Windows based app 🙏🏻

  • @MRSTU1210
    @MRSTU1210 7 місяців тому

    Just to let you know that drop box link works but the safari test kit files does nothing, I loaded it on to my Mpc one and it did nothing also on to Mpc beats 2 and the same thing nothing there sorry to say ,will be trying you calculator at some point to see if that works

    • @tonelabqt
      @tonelabqt 7 місяців тому

      "the safari test kit files does nothing" ?! ...in what sense?! ..did you select it via Programs?! ...it's worked for many others, so I'm unsure what 'does nothing' means. Can you see the Waveforms if you try to edit the Program.. via Prog Edit?! The calculator has worked for many, so I expect you should have no problem there 🙏🏻

    • @MRSTU1210
      @MRSTU1210 7 місяців тому

      @@tonelabqt no wav it was totally blank sir very strange

    • @tonelabqt
      @tonelabqt 7 місяців тому

      What MPC One O.S. version are you using?!

    • @MRSTU1210
      @MRSTU1210 7 місяців тому

      @@tonelabqt the newest one just updated a few days ago maybe i'm doing something wrong?

    • @tonelabqt
      @tonelabqt 7 місяців тому

      Hard to see from where I'm sitting.. but, like I was saying, if you can't access the Samples via the Edit Prog-page... then, the Program (and it's Samples) have not been loaded into your MPC. So, troubleshoot the 'LOAD' step, first. 👍🏼

  • @8cee
    @8cee 8 місяців тому

    midi-ox doesnt work for me -.-

    • @tonelabqt
      @tonelabqt 8 місяців тому

      Did it throw an error?!

  • @lecturesfrom
    @lecturesfrom 8 місяців тому

    This guy is hands down nicest in the game. Professor level

  • @clarencejeyofficial
    @clarencejeyofficial 8 місяців тому

    Thanks buddy as usual. This is what helped me create my own disks of samples that I hand picked, for quick access.

    • @tonelabqt
      @tonelabqt 8 місяців тому

      Awesome, glad it helped 🙏🏻

  • @larrytan73
    @larrytan73 8 місяців тому

    What if I tell I squeezed 12 channels out the mpc2xl using the 8outs plus the Digtal out and one of those cheap little A/D convertor..

    • @tonelabqt
      @tonelabqt 8 місяців тому

      The Digital 'out' is a stream of the Main Output. There's nothing in the O.S. that allows you to route any other channel to your Digital Output 🙏🏻

    • @larrytan73
      @larrytan73 8 місяців тому

      @@tonelabqt can you send the digital out to a external mixer channel? I have the main out on 1 and 2 and I have thedigital out on 3 and 4 The mpc is spitting out both signals at the same time. TRy it

    • @tonelabqt
      @tonelabqt 8 місяців тому

      Yes, but.. why would you want the same Output from the Analog Output as the Digital?!

    • @larrytan73
      @larrytan73 8 місяців тому

      lol! no your right i fucked up! too much weed! honestly i was thinking about it .I just didn't think it out long enough.. :)@@tonelabqt

  • @larrytan73
    @larrytan73 8 місяців тому

    Dope!

  • @MurderToCassette
    @MurderToCassette 8 місяців тому

    I used to do this with my SP 1200 and my MPC 3000. Sadly the Midi dump/input feature was removed in the Vailixi OS for the 3000. You have some excellent tutorials on here, wish I would have found your channel sooner

  • @samplidium
    @samplidium 9 місяців тому

    Are you planning to make a demo about Presets? Can't keep them running on my E4XT, they are automatically cleared...

    • @tonelabqt
      @tonelabqt 9 місяців тому

      There's a section in the 'introduction' video where I discuss Presets.. try this 🙏🏻 ua-cam.com/video/hZ8VPWOY7tc/v-deo.html

    • @samplidium
      @samplidium 9 місяців тому

      @@tonelabqt Thank you for your answer, i'll have to study why my Presets are cleared.

  • @hdsubstance1
    @hdsubstance1 9 місяців тому

    Brilliant!