Відео

Now UA-cam shorts can be up to 3 minutes long! I still had to speed up the video a little bit. BTW, here's the timing kit I used in the video. (it's an affiliate link) amzn.to/4h7F8So

Hope the turbo is in and testing is going well and th video will be up in a few weeks!!!

Have you had any issues with the Prius transfer case? The Prius doesn't have a traditional transmission, just a differential with two electric motors. I'm concerned about the health of the motors overtime when using any additive.

So do to a fracture on my toe I paid a local mechanic to do this for me. Lower control arms and shock and struts. To be honest after this was done the car didn’t change a bit it felt as if nothing was replaced . The only thing I didn’t told him to change were the outer tie rods which need to be replaced. Could this be why the car feels the same way as before changing only the lower control arms, shocks and struts?

I tried the 3/8 to 1/4 adapter and it wouldn’t fit even tried beating it in with a hammer😅 I ordered the tool:(

Cheers! Caught up all four years of work in less than a week! So excited to start my own CRV maintenance project on my daily

Let's goooooo!

now that is a good wish

I would've painted it black 😉

Only real mechanics find things like this🫡👍

Year of the snail 😂

Isn't the AC deleted?

Do you need to remove other parts to replace the dash trim? Mine are faded and I ordered the 4 piece kit from eBay and wondering if I just pull on the old ones or are they attached with screws?

Years later, but the sprayer has a long tube on the inside that reaches to the bottom. If you had cut that tube so that it would not get submersed in the oil, the container may not have collapsed. Anyway, thanks for the idea. I have a project that this might work for.

What year is your car? I wonder when the PS pump design changed...? My Xi is an 01.

Bless you, Michael. I learned a lot from your videos!

Which sender unit and gauge did you use? the location where you installed it is the oil temp sensor or the pressure switch? on the m54 housing.

Regarding the E-12 Socket, I tried a bunch of different brands when doing the trans, for higher torque applications you need a socket that fits all the way so it doesn't slip and round off the bolt. Sunnex 1/2 inch and Lisle 3/8 are the only 2 designs I found that work well. Lisle had the best fit but it's terrible quality for US made sockets. Pittsburgh, Craftsman (old and new) and Lexivon, don't fit all the way. Snap on and Hazet also work. 10 mm spline drive also works in a pinch on E12 but would not use it for higher torque applications.

great work, how long were your hoses? merry Christmas

Merry Christmas, everyone!

MOTORKOTE !!!

Thank you sir! Supercharged diesel incoming 😁

I'm thinking about getting the wrap-around rear spoiler off ebay, $300 new. They look like they could lower the drag coefficient quite a bit

My friend swapped in electronic steering assist out of a Nissan Versa into his 86 GT. That's what I want to do next with my formula, I'd probably shave a full second off autocross event times

So a small amount of excess drag when they pop up?

THIS! What do you call that scoop on the front of your hood?? I know it it equals the pressure so your headlights don't pop up at 90 mph or whatever

I forgot the name of the whatever air scoop, anyway it goes on the front of the hood and equalizes the pressure so your pop-up headlights don't come out at 90 mph (among other benefits)

I love these videos I'm looking to squeeze every extra highway miles per gallon out of my 86 (rebuilt carbureted 350 with the 'RV' cam and Muncie 4-speed)

Have you tried the yellow ones from Auxito? The white ones shown in your video seem a bit harsh on the eyes, I'm looking for some warm white ones like the stock lights, but brighter...

Thanks for the vid and *not* having annoying music!

Good video. One question, how have you adapted the engine cover so that it can be quickly removed?

It'd help if you used the correct weight oil for the car. It takes only 5W-30 oil. I have a 2007 myself. I also stick with original OEM filters, which are literally about $7 at Walmart.

I’m planning on putting 2 onto my sbc 350 any tips what to check for buying used

Where did you purchase it?

For up-to-date info on the Basket Case BMW project, check out the build thread at E46 Fanatics. www.e46fanatics.com/threads/build-thread-the-basket-case-bmw-project.1284565/#replies

Thank you very much

What does it leak out in the first place?

To warm up my car in winter, i let the window defroster and then cabin heater run for about 10 minutes or until air flow comes out warm. The heater keeps the engine running and help's with warming up the fluids on both engine and transmission.

what seal kit this you buy I have ZF 32136759815 input shaft leaking

Does the 68ohms, 5w resistor I keep the climate control and energy system showing on screen?? Cuz I install double din I lost both

Hi buddy. I’m confused become my small screen that came with the car says check connection to the ac. Steering wheel controls work for a/c. Auto and tamp.

If your wire welder is feeding crappy you can try blowing some air through the liner in the whip. Lots of times it will become filled with a dusty residue and cause feeding problems, in my experience. Good video.

Thank you it was really helpful

U made it worse

What do up set your tire pressure to?

engine and transmission ☠️ this vid isb2 years old and I bet u already scrapped this car

Thank you!

I removed the + terminal first and made a short circuit :(