Відео

Hi, thanks for your input. You may have seen it in my other video but I exploded a 2zz in a time attack race. So thats why I changed. I hand new lift bolts and a new oil pump in, so they help… Yes its a bit of a oil starvation problem under very hard cornering. I had only the 1zz pan and probably was barely full of oil. Didn’t over fil so that could have been my mistakes. In the end I enjoy swapping motors with new stuff. So thats why I did it. It was waaaay more expensive. No doubt. The donor car cost easly twice the price

@@JesseSpec I just got the last piece of the swap, and dollar for dollar I broke even from what I sold my 2zz setup for and I ended up with so far- K20a2 with a harness and random intake PLM Ramhorn headers Innovative mounts Link g4x plug and play Map harness with odb2/AC MAP ac bracket Frankenstein motorworks Junction box

Hi, thanks for your comment. It may look good to some, but we want to go fast, so 19inch is not the right size for the GR Yaris (reminder:homologation rally car)

@@tahayt6398 its custom. No paint code

Hahaha thanks for the comment! I prefer straight sixes hahaha

Hi, its not an k20a3…. Its a K20a2 (Euro spec type R)

@@theliverybros3733 are you asking, what rims are on the car?

Hahaha, please watch my whole series on how to kswap an mr2 on the very channel. You will a detailed overview of all the steps necessary. Take look and tell me what your think (more than 15 episodes)

Hello, there is definitely potential. If I could drop some cams in, it would probably make massive difference 🔥🔥🔥👌🏼

Hi man! Thanks for the kind and interesting comment. On the Mr2 swap, do we have another choice than the ppe? I guess I am learning it the hard way too hahaha Need to install some cams

Hi, thanks for your comment. There is nothing wrong with asking 😉🔥 I Will see if I can record that on the race track next time I go. Since its not a street car anymore I can’t really test that easily, but on the track I’ll try to get the 0 to 100km/h 👌🏼

Thanks man! Well appreciated 👌🏼🔥 Did you finish the swap already?

👌👌👌

It works well with that size. No rubbing on my car

Does it rub with h&r lowering spring ?

@@michaelhoang9669 hi, no idea 🤷🏽 but I don’t think so. Mine does not rub with coilovers

Hi, thanks for your kind comment. I was lazy on this one, I used the adapter harness and it just worked immediately 🔥👌🏼

@@JesseSpec I got the map adapter harness on to a kpro. I got a feeling I need to swap my engine loom as it might be the issue as I got an open plug.

@@JeanMasué hi, to be honest I think that is where your mistake is.

What do you mean?

Thanks buddy! Me too 🙂

Front 14kg and rear 9kg ;-)

Hahaha! Haven’t tried one yet 🥶

@@JesseSpec google search for this interesting thread "2GR home built swap details". Looks a bit like a widow maker!

Thanks for the feedback but thats actually the style I wanted to give it. Make sure your screen is not set to too dark

Thanks man! Have a good day 🔥👌🏼

Hi, thanks for your comment. The man seems to be homemade though 😂 I sadly have no idea 🥲 maybe one of my viewers knows the brand of the pump?

Hahaha I know. I just edited one video of the mr2 k20. Its coming 😂 thanks for your patience

Hallo, Ich habe mal eine 17x8 oder 17x9 et49 probiert aber der brake caliper kommt an bein den TC105X 🥲

Thanks man! I appreciate it 😊🔥

That is awesome to hear the video helped! You are welcome. You can use any lsd you find that is available and compatible with 5 or 6 speed transmissions. Depending where you are im the world I can even sell you a brand new one, like the one I installed in my video.

Awesome! Thanks for your feedback and watching the video!

Awesome! Thanks for watching and good luck on your build!

Hi, I am using the HJS street legal sport car with Invidia exhaust 😉🔥

Hast du auch mal eine Messung auf deinem Leistungsprüfstand - die Invidia AGA zusammen mit der HJS DP gemacht? Würde gerne mal wissen ob du noch mehr PS als bei deinem letzen Video mit der invidia rangeholt hast?!

あざっすタヌぐつさん！スイス遊びに来てください😊🔥💪🏼

Very true! All though I like the Honda engines, there is something that isn’t as nice as the Toyota engines from a drive feeling perspective

@@JesseSpec a properly spect turbo will make all the difference, I'll let you know how it goes

Thanks 😊💪🏼💪🏼 its. Question of balls hahaha

I don't know that engine very well to be honest 🙂

Any advice? What do you mean?

I always look at my onboard videos beetween the courses, at least after the two training courses, so you recognize the fault before race courses

@@Tom-Walther thank you that is a good tip 😊👌🏼 did you see any major mistakes in my runs? 🙏🏻🔥

Are you in Ambri this Weekend?

@@Tom-Walther sadly not 😭

Thank youuuu 🔥🏁

Hahahah thanks for the comment🤣 i am sadly not sure it would be faster. 2 episodes of k20 mr2 are backlogged. The will come

Thanks Jun-Oh! I actually did 😊👌🏼 new video is coming

Hi, do you speak english? 🥲

Thanks man 🔥👌🏼

Perfer mr-s content!!

Thanks for your input. I see you got triggered by the transmission loss. In Europe we just like to have an Engine power figure… you must be from the US. Thats funny, we get more often 25% as a benchmark for ff cars in transmission loss. Where do yOu base your claims on? In what country are you? US? I am Switzerland and our cars are officially registered at 192hp. US Spec is not like the EU Spec. We run with 98 octane, more like in Japan. To be honest the numbers seem very realistic. But even then, if you feel like disputing the transmission factor loss I use, thats your choice. Whats important in the end is using that transmission loss accross the board on all the runs and pulls I did after that basemark. To determine the gain. Who gives a damn about the end number? Its the gain we want to see. This is my first video, you will see there are litteraly a hundred more videos I posted and probably 30-40about the 2zz. Give them a watch and tell me what you think.

Thanka man! I agree 🥶

Hi! Thanks for your question. To be honest spacers suck! They mess up your geometry and handling. Don’t put spacers. All your bushings and bearings will also thank you

Hi, thanks for your comment! Will take a look

Yes! Collector’s item 😍

@@JesseSpec toda engine original yes or no

@@Jordan-mj2lf its actually surely a french brand of itbs… i don’t know the brand hahaha

80-90degrees C

Nope, that is not true. I actually tried it and it doesn’t work. You need to desactivate it properly, pulling the handbreak doesn’t suffice

Hi, thanks for your comment! I am happy to hear my video is useful to you 😊 Regarding that seal leak, I don’t remeber the depth. But I would suggest you get the workshop manual and use that information. Good luck! Best regards. Jesse

Hi, none that I Know of, I am afraid