Відео

Good luck and you have to love being a mechanic to stay with it😮

how much schooling do have left school and working trying to make a living takes a toll

Nice tour. Great set for young guy. Congratulations

Great video thanks 👍

not useful at all show how to remove it

I have a 1989 with a vortec that was swapped and i have a few questions about it if have # could call or anything

IM confused . so the small purple and white wire hook to the bigger white tach wire then to distributor tack????

You will need chromes can get decent for cheap though

Can i just replace the MC gasket?

I would highly recommend an adjustable oil filter wrench that works with any size. It functions like a slip joint pliers, all the other ones are a pain to use. You mentioned the another toolbox with some other stuff, maybe you have that not shown. I would like to see a tour of your other box, nice video, thanks.

I would highly recommend an adjustable oil filter wrench that works with any size. It functions like a slip joint pliers, all the other ones are a pain to use. You mentioned the another toolbox with some other stuff, maybe you have that not shown. I would like to see a tour of your other box, nice video, thanks.

I would highly recommend an adjustable oil filter wrench that works with any size. It functions like a slip joint pliers, all the other ones are a pain to use. You mentioned the another toolbox with some other stuff, maybe you have that not shown. I would like to see a tour of your other box, nice video, thanks.

Great video. In the tech industry we use HF on multimillion dollar equipment. If you're field service and they get lost or stolen it's no big deal. No shame in the HF. It's you not the tool.

Does yours have hesitation issues for example- when I step on mine it will sorta bog out or just cut out for 2 second and the get it but very slowly mostly everything is brand new on it to anything helps thank you

Wish your video came up first on feed! I’m in the process of doing the same thing the forums and other videos arent as informative and your video really helped me have a good idea of what to do thanks!

Thats my reason for wanting to do the swap on mine, same problems can't figure out. Code 42 43 backfire, hesitation, paid a mechanic $500 couldn't figure it out. Im just trying to make the thing run because I can't afford a new one. So with the tbi/hei its running good?

Nice 👍 thanks

You’re my people man, good job.

Why did u buy new head bolts ? Those bolts aren’t stretch bolts and can be reused. That’s the beauty of working on old stuff.

Okay so i wanna do the reverse of this i have buckets im swapping on the 60/40 is it hard?

Thanks for making this video , my truck isn’t throwing a code but I keep losing brake fluid and I can feel the break power dwindling. Sometimes the peddle will sink while I’m at a light.

My vehicle is GMC Yukon slt 2011. Started facing this problem and I am still stuck with this notification. It started with the brake booster, got it changed but the message came back, then after checking it was found that there is a problem with ABS, got it changed and original ABS program was installed. I had to do a procedure of opening the booster and checking the pressure along with bleeding the brakes but, the message came back. Now what? Ground cable was also cleaned. The message appears after couple minutes of driving.

Use the smog pump to pull vacuum on the crank case my friend go NASCAR

I have a 2012 Silverado and couldn’t track down where it was losing brake fluid. Thanks for posting

do you know the thread pitch etc for the washer and nut you put onto the clutch fork. and the name of the retainer clip? id greatly appreciate it

thanks

This is exactly what my truck is doing been trying to figure out where the fluid was going

As soon as I saw the Scotchloks I knew to stop the video and quit watching... nothing to learn here.

Promo SM 🤘

So ive done this like you say by running the tach signal from hei distributor to the purple wire on the harness. Ran, but very very rich. Perhaps an aftermarket computer will work like that, but not an oem gm one. There is a way to "trick" the computer to an extent, but it wont make proper air fuel adjustments. Ultimately don't recommend this whatsoever. Not opposed to the hei mechanical advance, but it just doesn't jive without changing the ignition module. And then you have at minimum the brown/black jumper wire disconnected, so the computer wont compute like it supposed to.

You you have parts number to the sensors as well? How would we ask for those at Napa

Did you jave to change the fan to fit the vortec water pump?

Looks like someone took a shit on that dash....😂😂😂

The Biden admin just Calif the whole country next year. So that will be illegal in all 50 states. Calif sucks for smog Bs. U cant make any changes to any vehicle. I know this because i work for Carb. Every state is opening carb offices. And r standards got more strict this yr. We would smash that truck just for changes u made to it. And u could be charged criminally for taking smog off the truck. I hate what Biden is doing.

Do you have to have that spring? Can you use the clutch pedal without it? That’s why my problem is. Don’t know if it has to have one or not. Let me know. Thanks.

Did it your way, now I have code 42 , can help me solve it,,, ignition bypass, and thank you

One other thing that you will need is a doubler on the firewall, the clutch pedal pushing on the clutch master will crack the firewall.

Bushing is a better choice, the bearing doesn't last that long and when it fails it takes out the input shaft. The bushing is oil impregnated bronze that never needs lube. Bushings have been used since the beginning of automotive history.

Don’t use wood. Just use another screwdriver 👍🏼

Did a L98 swap in my 90 TBI truck. If i can use the OEM L98 dizzy by following your tips then im gonna try.

EPA is coming for you

Anything ever happen to the Dizzy? its been a year what issues have come of this swap?

How'd you get your injectors to pulse?

Thanks for the vid.

Where did you connect the orange dimmer wire to

Nice work

What is that lil black box between the water neck n the intake manifold

This video was exactly what i needed to replace mine! Thanks for making this! Those bolts had me so worried until you said to lube them up idk why i didnt think about that

*PromoSM*

A Que hijo de la mañana….you did a badass job and cheap…. Gonna try this on my 93 silverado…. Awsome video by the way