Відео

I’d give u 10 thumbs up if I could. Is this the same on my 2014 GL350

Bro om642 is tank engine.

iarna nu ingheata apa si gazele condensate ?in recipientul de conectare eu am avut aceasta problema

0:14 "Dreaded OM642" - LOL - only by people who aren't very skilled at auto mechanics. Like a guy that routes crankcase vapors IN FRONT of the air filter so that the air filter can get oil saturated in no time. And WTF are you on about "sucking oil accumulated in the oil cooler"? Seriously? The oil cooler is a brazed-plate heat exchanger with oil on one side and coolant on the other - mounted under the intake manifold. What on Earth do you think this has to do with what you're dealing with here?

Can you do a video on replacing the camshaft seal?

Dangggg that looks good so you used the mequires 67 to restore then what did you use for polish??

Önereceğiniz yer varmı

This is Excellent! Engineers don't even measure up!

sweet idea🍻can you send me links to the parts you used for this thanks

Can it disable the eco mode?

This will only help with oil mist... If the engine was caked up by this you need to take apart and clean the whole engine which sock

Cekaj,stani...uljne pare sad idu kroz filter zraka? Ne,ne,ne,ne....

I have replaced this is still sucks in oil. Strange thing is the old one like on the left seem to be better and suck in less oil. I do need a catch can.

Hi can please guide me where i connect the sensor. Thanks

not much help you dident show how to replace the unit

You’re pretty awesome. I don’t want a 7 seat gle as I can’t stand the shape. Nor the glb, it looks silly. Gos is too much. I will get gl class 2012/13. By summer. I have to budget for the car & say have at 2k aside for any issues &, keep topping up that maintenance fund. I certainly wouldn’t be able to do any of this myself. It’s too much for me. I hope my mechanic listens to your advice.

do you have a parts number list and where to order them?

❤❤❤

Recently mine om642 smoke white steam mixed with ash when push throttle harder. coolant drops by 100 ml so far. Any ideas😮

For e280 cdi om642920?

I did this 3 years ago, and it helped. Too bad the rest of the truck is also shit. EZS, ISM, TCM, and ECM all went to shit... FBS3 system makes everything a nightmare to replace, even with good SW/HW. Mercedes is dead to me...

Always nice to have somebody doing ALL the hard work and then telling us ALL the secrets. THANKS

Thank you so much for the suggestions! One comment is that, there is something to look out for when plumbing the PCV before the air filter on the passenger side intake. when the engine is off, there is nothing preventing the moisture and other things getting into the hose leading to the CCV. Once the engine is on, CCV starts opening, the moisture and other things might getting into the crankcase although the chance is low. An improved version would be adding some sort of filter there to prevent things getting into it.

I have a 2008 Mercedes 320 GL in the problem is cranks. It won’t start until I use. The ether runs fine no problem at all but as soon as I turn it off it won’t start again I had to put it ether again, replaced the high-pressure fuel pump And is still doing the same thing any recommendation I will appreciate by the way, I don’t have no codes

I just acquired a 2012 Sprinter that has 100k miles with the OM642 3.0L V6 . The CCV is marked A-642-010-17-91. It may have been changed at least once already; I don't know. So maybe an aftermarket CCV assembly. Thanks for the video. Interested in your suggestion about loosening 4 bolts on the valve cover. Did you have to do that. I watched another video where a guy was having issue and use a pry bar gently to get it going, but he did not loosen any valve cover bolts. Do you know the torque specs for the valve cover bolts? And are there torque specs for the CCV? Also, no mention of using Anti-Seize on the steel bolts into the aluminum block. The factory uses Anti-Seize on all steel bolts into the aluminum block.

this is what i need it thanks

Hi! May I know which website did you buy the parts?? TY.

Why dreaded OM642? It was build in high volumen and is inside many mercedes cars and reaches high milage before breaking so not too bad engine :-)

Just put a smaller diameter hose piece into the original pcv valve. In front of the sensor( if you are concerned it being sucked into the turbo) This reduces vacuum created by the turbo a lot. I went with 4mm hole in the smaller hose piece.

Where can find the part for the Oil Catch Can

Do you have a part number for the sensor or description I can look up? This is for an 08 R350. Hatch won't auto close.

So you remove the glass panel without removing the liner?

Did you add catch can for oil? Do you have a video on it

Can you not vent the gasses off to air via a catch can then blank the inlet by the turbo

Great video - how did you connect the pro vent to intake air duct in front of the air filter?

This makes a lot of sense. Most cars route the PCV in front of the air filters. I had a golf which had the same type of routing directly into the intake and the intake was also very oily.

Can you link me to Lee’s instructions? I see his boat vids and looking to do this on my motorhome! Thanks for sharing, it looks fantastic

Mine will not power-open (I can do it by hand) but it can power-close?

I have the same oil sucking issue on a 2012 W221 S350. I am going to do what you did. Thanks

Hi I got mercedes s350 bluetec w221 2013 the problem is turbo, actuator goes up and down plug-in the lam obd scanner no faults I don’t know what’s the problem ua-cam.com/video/3vSyfZAVe3Q/v-deo.html

Brilliant idea indeed 👍

I don’t think I asked this properly before. I would love to see the plumbing of the PCV re-routing from the catch can into the air intake feed on the passenger side. What kind of coupler did you glue / cement inside that plastic on the air feed intake to allow for the hose clamps.

Thanks for the video. You said dreaded OM642 engine. I have 3 vehicles. All with the same engine. Outside of replacing the oil cooler seals, cleaning the induction system and general maintenance I have had no issues. Please elaborate “dreaded OM642”. Thanks

Good job however, that coupling is going to collapse when it gets hot. I did the exact same thing. I fab'd up an aluminum support cage to slide into the coupling. No more deformation or collapsing..

At time 2.36 oil does not accumulate into the oil cooler but into the Intercooler ( for the air intake after the turbo before the intake manifold)

So what is you solution the Connector or the plumbing into the one air filter

Im very curious how your air filters look after driving and sucking in the fumes?

Doing what you did plus a full delete will give you a brand new car the way it should be

of course the pcv will go bad right next to the cat with all of the dpf regen heat cycles. stupid emissions system is the greatest parasite

Wow, you are such a blessing...I hope you keep us upto date on any other midifications youbmade to your wife's suv...thanks for sharing the knowledge ☝🏾