Відео

For droop on my HW90, I use a full length Sportsmatch AOP56 fully adjustable mount. Shimming is not the right way to do it.

Very interesting. I’ve got a synthetic HW30 on pre order and tempted to colour up the stock. A nice camo effect would look good l think. Thank you for your vid and have subscribed. Best wishes. 👍🏻🇬🇧

Hi Matt, Just came across this video so probably resolved by now. I had the same issues with two HW35s. I have a 1988 HW 80 bought new, just fitted a vortek kit and seal. What a huge improvement. Back to the 35 problem. I tried all sorts. A good idea is to get a straight three foot rule, place it on the breach block accurately. This will tell you whether the barrel is out of kilter with the mechanism or the barrel droops. Also if the barrel has ever been changed and the serial no. is not near the manufactured date it may not be accurate. Hope this helps.

I'll give it a go and try not using newspapers. 👍🏻

Which is why the HW77 is the gun that will still be the only thing around except locusts after nuclear war, not the 80…in my probably ignorant opinion!

Lovely figuring on that bit of walnut.

👌ive just cone across your channel 👍 brilliant thanks very helpful 👌👌👌👌

Excellent video Mat, I think this will come in extremily useful. Cheeers mate! (P.S. could you do a video on starting a fire without matches/lighter/flint and steel?)

A dab of thread locker fluid or nail var ish on the threads of the replacement stud will help prevent the stud from becoming loose, through of course the bipod will also help to keep it in place.

I'm not allowed to play with fire, apparently I have issues....

Ms. Breeze is just curious to what Daddy is doing.

Feather stick is making kindling into tinder

I want porridge now.. 😂

German engineering. Built , then a lil bit more.

I'd not come of an H.W80 springer for a pcp. Respect to those PCP people, but i just love spring guns.😊

Made a massive school boy error with my hw30, bloody de-cocked it incorrectly.. knocked safety off , pulled trigger and BANG while the barrel was broken..😢 held the barrel and no injuries but now its all grouchy and twangy when its shot😢 and ideas what i could have done to the poor bugger? And what to maybe check for if i open it up?

great video, thanks mate!

Im from Philippines,im only had this hw100kt here in Philippines

What was the point of removing the barrel in the first place? I see another spring replace without removing it. ?

Very good video well explained. I'm a complete beginner and wasn't sure if fitting a bidod was a case of drilling holes into the stock (something I absolutely wouldn't want to do). Are bipods available which just clamp onto the sides of the stock?

Beautiful gun that mate love it

At what point did you remove the safety pin and the safety pin spring?

This is the easiest way I’ve ever used. Thanks!

Excellent tips - Keep up the good work.

Longest ritz cookie ad

How about we get the lead mold aye how about making our own lead pellets and sell em on the black market. Somthing i heard on the war of the worlds music l.p. lol

Talking sense. I now want to stock pile lead pellets.

I bought a KT s/h which was 6 years old owned it for another 6 years never had a problem, no leaks. Had it tuned by Ratworks, Tench regulator and lightweight cylinder fitted and it made the gun even better. I now also have a 100bp which is also a great gun. I ve owned Daystates and Steyrs and the HW is just as good as them and a good deal cheaper

When putting the spring back in put one of the pins in first instead of the grub screw, then put the grub screw in then remove the pin again so you can get the trigger unit in. Much easier than struggling to to get screw in when trying to compress the spring.

When putting the spring back in put one of the pins in first instead of the grub screw, then put the grub screw in then remove the pin again so you can get the trigger unit in. Much easier than struggling to to get screw in when trying to compress the spring.

Did the optic creep backwards? In my experience with spring air rifles the recoil moves optics.

Does Weihrauch manufacture their own Bipod to save the hassle of washers etc.

Totally different approach, but you've inspired me to look into getting the synthetic stock on my Stoeger X20 camo dipped...

Thanks for this Matt. Always good to follow someone else stripping a gun for the first time. My 30 is the only gun I havent tuned as yet so stripped it following your video in readiness for a Welsh Willy kit and a set of Britseals.

do you still use it and is this uk version or fac version?

Recently been researching this issue (no expert) but i came across the 1 piece sports match hop19c mount, pre compensated for barrel droop. Has an arrestor pin also.

Vorrei cortesemente conoscere la marca e le caratteristiche dell' ottica montata sulla carabina. Grazie.

Hi Matt, what pads did you use to extend the stock? I have the same synthetic one on order which I’m looking forward to getting. My only concern is how long we’ll be able to use lead for. I’ve read the baffles inside the moderator act like a cheese grater with anything other than fibre wad.

On next weeks show, we'll be looking into how to wear your hat! 😂

But the real question is … today’s show was brought which biscuit ?

I never knew I didnt know how to tie my laces....

I would buy it in a heartbeat, if only it had a 'classic' stock. Too bad I'm oldschool.

Well explained.

Well that was simple. Thanks Matt. Much appreciated 👍🏻 #subbed

Good morning Matt I have another question for you about my PCP and has something to do with air pressure the recommended air pressure for the gun in the manual says 250 bar. Any place else that it talks about pressure it says 230 bar now my concern is with the FXDRS classic, that’s pretty narrow margins on a small tank what the problem is when I refill this thing in a cool environment the pressure is 230 bar that I go to but it exceeds 250 when I take it out in the heat comment please

Excellent vid! It has inspired me to have ago at replacing the spring in my HW30. I'm in the UK but it has a German spring so is very low power, about 4fpe. Do you have any reccomendations for a de-greaser?

Something I've found useful for reassembling mechanical things is to remember to take plenty of photos as I disassemble them and to be organised with the screws and small parts by keeping them in labelled trays, polythene bags etc. The HW30 is an excellent spring air rifle.

I have a FX - DRS - classic why is the shot speeding up as the tank is coming closer to empty

Nice, whats the lowest number shot allowed in UK, can you buy like 00 buck?